| |
|
| [General Information]
|
| Processor Name: | AMD-K6(tm)-III Processor
|
| Current Processor Frequency: | 449.1 MHz
|
| Current Processor Frequency [MHz]: | 449
|
| | |
|
| CPU ID: | 000005D0
|
| Extended CPU ID: | 000006D0
|
| CPU Brand Name: | AMD-K6(tm)-III Processor
|
| CPU Vendor: | AuthenticAMD
|
| CPU Stepping: | (Model D)
|
| CPU Technology: | 180 nm
|
| CPU Platform: | Super Socket 7 (321)
|
| | |
|
| Number of CPU Cores: | 1
|
| Number of Logical CPUs: | 1
|
| | |
|
| [Operating Points]
|
| CPU Current: | 449.1 MHz
|
| | |
|
| CPU Bus Type: | FSB
|
| | |
|
| [Cache and TLB]
|
| L1 Cache: | Instruction: 32 KBytes, Data: 32 KBytes
|
| L2 Cache: | Integrated: 256 KBytes
|
| Instruction TLB: | Direct Mapped, 64 entries
|
| Data TLB: | 2-way set associative, 128 entries
|
| | |
|
| [Standard Feature Flags]
|
| FPU on Chip | Present
|
| Enhanced Virtual-86 Mode | Present
|
| I/O Breakpoints | Present
|
| Page Size Extensions | Present
|
| Time Stamp Counter | Present
|
| Pentium-style Model Specific Registers | Present
|
| Physical Address Extension | Not Present
|
| Machine Check Exception | Present
|
| CMPXCHG8B Instruction | Present
|
| APIC On Chip / PGE (AMD) | Not Present
|
| Fast System Call | Not Present
|
| Memory Type Range Registers | Not Present
|
| Page Global Feature | Present
|
| Machine Check Architecture | Not Present
|
| CMOV Instruction | Not Present
|
| Page Attribute Table | Not Present
|
| 36-bit Page Size Extensions | Not Present
|
| Processor Number | Not Present
|
| CLFLUSH Instruction | Not Present
|
| Debug Trace and EMON Store | Not Present
|
| Internal ACPI Support | Not Present
|
| MMX Technology | Present
|
| Fast FP Save/Restore (IA MMX-2) | Not Present
|
| Streaming SIMD Extensions | Not Present
|
| Streaming SIMD Extensions 2 | Not Present
|
| Self-Snoop | Not Present
|
| Multi-Threading Capable | Not Present
|
| Automatic Clock Control | Not Present
|
| IA-64 Processor | Not Present
|
| Signal Break on FERR | Not Present
|
| Streaming SIMD Extensions 3 | Not Present
|
| PCLMULQDQ Instruction Support | Not Present
|
| MONITOR/MWAIT Support | Not Present
|
| Supplemental Streaming SIMD Extensions 3 | Not Present
|
| FMA Extension | Not Present
|
| CMPXCHG16B Support | Not Present
|
| Streaming SIMD Extensions 4.1 | Not Present
|
| Streaming SIMD Extensions 4.2 | Not Present
|
| x2APIC | Not Present
|
| POPCNT Instruction | Not Present
|
| AES Cryptography Support | Not Present
|
| XSAVE/XRSTOR/XSETBV/XGETBV Instructions | Not Present
|
| XGETBV/XSETBV OS Enabled | Not Present
|
| AVX Support | Not Present
|
| Half-Precision Convert (CVT16) | Not Present
|
| [Extended Feature Flags]
|
| FPU on Chip | Present
|
| Enhanced Virtual-86 Mode | Present
|
| I/O Breakpoints | Present
|
| Page Size Extensions | Present
|
| Time Stamp Counter | Present
|
| AMD-style Model Specific Registers | Present
|
| Machine Check Exception | Present
|
| CMPXCHG8B Instruction | Present
|
| APIC On Chip | Not Present
|
| SYSCALL and SYSRET Instructions | Present
|
| Memory Type Range Registers | Not Present
|
| Page Global Feature | Present
|
| Machine Check Architecture | Not Present
|
| CMOV Instruction | Not Present
|
| Page Attribute Table | Not Present
|
| 36-bit Page Size Extensions | Not Present
|
| Multi-Processing / Brand feature | Not Present
|
| No Execute | Not Present
|
| MMX Technology | Present
|
| MMX+ Extensions | Not Present
|
| Fast FP Save/Restore | Not Present
|
| Fast FP Save/Restore Optimizations | Not Present
|
| 1 GB large page support | Not Present
|
| RDTSCP Instruction | Not Present
|
| x86-64 Long Mode | Not Present
|
| 3DNow! Technology Extensions | Present
|
| 3DNow! Technology | Present
|
| LAHF/SAHF Long Mode Support | Not Present
|
| Core Multi-Processing Legacy Mode | Not Present
|
| Secure Virtual Machine | Not Present
|
| Extended APIC Register Space | Not Present
|
| LOCK MOV CR0 Support | Not Present
|
| Advanced Bit Manipulation | Not Present
|
| SSE4A Support | Not Present
|
| Misaligned SSE Mode | Not Present
|
| PREFETCH(W) Support | Not Present
|
| OS Visible Work-around Support | Not Present
|
| Instruction Based Sampling | Not Present
|
| XOP Instruction Support | Not Present
|
| SKINIT, STGI, and DEV Support | Not Present
|
| Watchdog Timer Support | Not Present
|
| TBM0 Instruction Support | Not Present
|
| Lightweight Profiling Support | Not Present
|
| FMA4 Instruction Support | Not Present
|
| Translation Cache Extension | Not Present
|
| NodeId Support | Not Present
|
| Trailing Bit Manipulation | Not Present
|
| Topology Extensions | Not Present
|
| Core Performance Counter Extensions | Not Present
|
| NB Performance Counter Extensions | Not Present
|
| Streaming Performance Monitor Architecture | Not Present
|
| Data Breakpoint Extension | Not Present
|
| Performance Time-Stamp Counter | Not Present
|
| L2I Performance Counter Extensions | Not Present
|
| MWAITX/MONITORX Support | Not Present
|
| Secure Memory Encryption | Not Present
|
| Secure Encrypted Virtualization | Not Present
|
| | |
|
| [Enhanced Features]
|
| Core Performance Boost | Not Supported
|
| | |
|
| [Memory Ranges]
|
| Maximum Physical Address Size: | 32-bit (4 GBytes)
|
| Maximum Virtual Address Size: | 32-bit (4 GBytes)
|
| |
|
| [General Module Information]
|
| Module Number: | 0
|
| Module Size: | 128 MBytes
|
| Memory Type: | SDRAM
|
| Error Check/Correction: | None
|
| Memory Speed: | 100.0 MHz (PC100)
|
| Module Manufacturer: | SK Hynix
|
| Module Part Number: | 76V16655HGT8-S
|
| Module Serial Number: | 3200327776
|
| Module Manufacturing Date: | Year: 2001, Week: 16
|
| | |
|
| [Module Characteristics]
|
| Module Width: | 64-bits
|
| Module Voltage: | LVTTL
|
| SPD Revision: | 1.2
|
| Number Of Rows: | 2
|
| Row Address Bits: | Bank 1: 12, Bank 2: 12
|
| Column Address Bits: | Bank 1: 9, Bank 2: 9
|
| Number Of Banks: | 4
|
| | |
|
| [Module timing]
|
| Supported Burst Lengths: | 1, 2, 4, 8
|
| Refresh Rate: | Normal (15.625 us)
|
| Min. Back-to-Back Clock Delay: | 1
|
| Supported CAS Latencies (tCAS): | 3.0, 2.0
|
| Min. RAS-to-CAS Delay (tRCD): | 20.00 ns
|
| Min. Row Precharge Time (tRP): | 20.00 ns
|
| Min. RAS Pulse Width (tRAS): | 50 ns
|
| | |
|
| Supported Module Timing at 100.0 MHz: | 3.0-2-2-5
|
| Supported Module Timing at 83.3 MHz: | 2.0-2-2-5
|
| | |
|
| Min. Row-Activate To Row-Activate Delay (tRRD): | 20.00 ns
|
| Supported CS Latency: | 0
|
| Supported WE Latency: | 0
|
| | |
|
| [Features]
|
| Early RAS# Precharge: | Not Supported
|
| Auto Precharge: | Supported
|
| Precharge All: | Supported
|
| Write1/ReadBurst: | Supported
|
| Buffered Address/Control Inputs: | Not Supported
|
| Registered Address/Control Inputs: | Not Supported
|
| On-card PLL For Clock: | Not Supported
|
| Buffered DQMB Inputs: | Not Supported
|
| Registered DQMB Inputs: | Not Supported
|
| Differential Clock Input: | Not Supported
|
| Redundant Row Address: | Not Supported
|
| | |
|
| [Intel-defined characteristics]
|
| Intel-defined Concurrent AutoPrecharge: | Supported
|
| CAS Latency 2: | Not Supported
|
| CAS Latency 3: | Supported
|
| Max. Junction Temperature: | 100 C
|
| |
|
| [General Module Information]
|
| Module Number: | 1
|
| Module Size: | 128 MBytes
|
| Memory Type: | SDRAM
|
| Error Check/Correction: | None
|
| Memory Speed: | 100.0 MHz (PC100)
|
| Module Manufacturer: | SK Hynix
|
| Module Part Number: | 76V16655HGT8-S
|
| Module Serial Number: | 3502317664
|
| Module Manufacturing Date: | Year: 2001, Week: 16
|
| | |
|
| [Module Characteristics]
|
| Module Width: | 64-bits
|
| Module Voltage: | LVTTL
|
| SPD Revision: | 1.2
|
| Number Of Rows: | 2
|
| Row Address Bits: | Bank 1: 12, Bank 2: 12
|
| Column Address Bits: | Bank 1: 9, Bank 2: 9
|
| Number Of Banks: | 4
|
| | |
|
| [Module timing]
|
| Supported Burst Lengths: | 1, 2, 4, 8
|
| Refresh Rate: | Normal (15.625 us)
|
| Min. Back-to-Back Clock Delay: | 1
|
| Supported CAS Latencies (tCAS): | 3.0, 2.0
|
| Min. RAS-to-CAS Delay (tRCD): | 20.00 ns
|
| Min. Row Precharge Time (tRP): | 20.00 ns
|
| Min. RAS Pulse Width (tRAS): | 50 ns
|
| | |
|
| Supported Module Timing at 100.0 MHz: | 3.0-2-2-5
|
| Supported Module Timing at 83.3 MHz: | 2.0-2-2-5
|
| | |
|
| Min. Row-Activate To Row-Activate Delay (tRRD): | 20.00 ns
|
| Supported CS Latency: | 0
|
| Supported WE Latency: | 0
|
| | |
|
| [Features]
|
| Early RAS# Precharge: | Not Supported
|
| Auto Precharge: | Supported
|
| Precharge All: | Supported
|
| Write1/ReadBurst: | Supported
|
| Buffered Address/Control Inputs: | Not Supported
|
| Registered Address/Control Inputs: | Not Supported
|
| On-card PLL For Clock: | Not Supported
|
| Buffered DQMB Inputs: | Not Supported
|
| Registered DQMB Inputs: | Not Supported
|
| Differential Clock Input: | Not Supported
|
| Redundant Row Address: | Not Supported
|
| | |
|
| [Intel-defined characteristics]
|
| Intel-defined Concurrent AutoPrecharge: | Supported
|
| CAS Latency 2: | Not Supported
|
| CAS Latency 3: | Supported
|
| Max. Junction Temperature: | 100 C
|
| |
|
| [General Information]
|
| Device Name: | Intel 82371AB PCI ISA IDE Xcelerator 4 - PIIX4 [B-0]
|
| Original Device Name: | Intel 82371AB PCI ISA IDE Xcelerator 4 - PIIX4 [B-0]
|
| Device Class: | PCI-to-ISA Bridge
|
| Revision ID: | 1
|
| PCI Address (Bus:Device:Function) Number: | 0:1:0
|
| PCI Latency Timer: | 0
|
| Hardware ID: | PCI\VEN_8086&DEV_7110&SUBSYS_00000000&REV_01
|
| | |
|
| [System Resources]
|
| Interrupt Line: | N/A
|
| Interrupt Pin: | N/A
|
| | |
|
| [Features]
|
| Bus Mastering: | Enabled
|
| Running At 66 MHz: | Not Capable
|
| Fast Back-to-Back Transactions: | Capable
|
| | |
|
| [ISA I/O Recovery Timer]
|
| 16-bit I/O Recovery Time: | 1 SYSCLKs
|
| 16-bit I/O Recovery: | Enabled
|
| 8-bit I/O Recovery Time: | 2 SYSCLKs
|
| 8-bit I/O Recovery: | Enabled
|
| DMA Res. Page Reg. Aliasing: | Enabled (I/O 90-9F = 80-8F)
|
| | |
|
| [X-Bus Chip Select]
|
| Micro Controller Location: | Disabled
|
| 1-Meg Extended BIOS: | Disabled
|
| I/O APIC: | Disabled
|
| Extended BIOS: | Disabled
|
| Lower BIOS (E0000h): | Disabled
|
| Coprocessor Error: | Enabled (FERR# -> IRQ13)
|
| IRQ12/Mouse Function: | Standard IRQ12
|
| BIOSCS# Write Protect: | Disabled (Read only)
|
| KBCCS# Keyboard Controller: | Enabled
|
| RTCCS#/RTCALE RTC: | Enabled
|
| | |
|
| [PIRQA Route Control]
|
| IRQ Routing: | Enabled
|
| IRQ Number: | 9
|
| | |
|
| [PIRQB Route Control]
|
| IRQ Routing: | Disabled
|
| IRQ Number: | 0
|
| | |
|
| [PIRQC Route Control]
|
| IRQ Routing: | Enabled
|
| IRQ Number: | 10
|
| | |
|
| [PIRQD Route Control]
|
| IRQ Routing: | Enabled
|
| IRQ Number: | 3
|
| | |
|
| [Serial IRQ Control]
|
| Serial IRQ: | Disabled
|
| Serial IRQ Mode: | Quiet mode
|
| Serial IRQ Frame Size: | 21
|
| Start Frame Pulse Width: | 4 Clocks
|
| | |
|
| [Top Of Memory]
|
| Top of ISA Memory: | 16 MBytes
|
| ISA/DMA Lower BIOS Forward: | Disabled
|
| A000/B000 Segment Forward: | Disabled
|
| ISA/DMA 512K-640K Region Forward: | Enabled
|
| | |
|
| [Miscellaneous Status]
|
| SERR# on Delayed Transaction: | Disabled
|
| Host-to-PCI Bridge Retry: | Enabled
|
| | |
|
| [Motherboard DMA Control]
|
| Type F and DMA Buffer: | Disabled
|
| DMA Channel: | 4
|
| | |
|
| [Motherboard DMA Control]
|
| Type F and DMA Buffer: | Disabled
|
| DMA Channel: | 4
|
| | |
|
| [APIC Base Address Relocation]
|
| A12 Mask: | Disabled
|
| APIC Base Address: | FEC00000
|
| | |
|
| [Deterministic Latency Control]
|
| SERR# on Delayed Transaction Timeout: | Disabled
|
| USB Passive Release: | Disabled
|
| Passive Release: | Enabled
|
| Delayed Transactions: | Enabled
|
| | |
|
| [PCI DMA Configuration]
|
| DMA CH7 Select: | Normal ISA
|
| DMA CH6 Select: | Normal ISA
|
| DMA CH5 Select: | Normal ISA
|
| DMA CH3 Select: | Normal ISA
|
| DMA CH2 Select: | Normal ISA
|
| DMA CH1 Select: | Normal ISA
|
| DMA CH0 Select: | Normal ISA
|
| | |
|
| [Distributed DMA (CH0-3) slave base pointer]
|
| Slave Channel I/O Address: | 0
|
| | |
|
| [Distributed DMA (CH5-7) slave base pointer]
|
| Slave Channel I/O Address: | 0
|
| | |
|
| [General Configuration]
|
| KBCCS#/GPO26 Pin Select: | KBCCS#
|
| RTCALE/GPO25 Pin Select: | RTCALE
|
| RTCCS#/GPO24 Pin Select: | RTCCS#
|
| XOE# and XDIR#/GPO[22:23] Pin Select: | XOE# and XDIR#
|
| RI#/GPI12 Pin Select: | RI#
|
| LID/GPI10 Pin Select: | LID
|
| BATLOW#/GPI9 Pin Select: | BATLOW#
|
| THRM#/GPI8 Pin Select: | THRM#
|
| SUS_STAT2#/GPO21 Pin Select: | SUS_STAT2#
|
| SUS_STAT1#/GPO20 Pin Select: | SUS_STAT1#
|
| ZZ/GPO19 Pin Select: | ZZ
|
| PCI_STP#/GPO18 Pin Select: | PCI_STP#
|
| CPU_STP#/GPO17 Pin Select: | CPU_STP#
|
| SUSB# and SUSC#/GPO[15:16] Pin Select: | SUSB# and SUSC#
|
| SERIRQ/GPI7 Pin Select: | GPI7
|
| SMBALERT#/GPI11 Pin Select: | SMBALERT#
|
| IRQ8#/GPI6 Pin Select: | GPI6
|
| Secondary IDE Signal Tri-state: | Disabled
|
| Primary IDE Signal Tri-state: | Disabled
|
| PC/PCI REQC, GNTC/GPI[4,11] Pin Select: | GPI[4,11]
|
| PC/PCI REQB, GNTB/GPI[3,10] Pin Select: | GPI[3,10]
|
| PC/PCI REQA, GNTA/GPI[2,9] Pin Select: | GPI[2,9]
|
| PnP Address Decode: | Disabled
|
| Alternate Access Mode: | Disabled
|
| IDE Signal Split: | Disabled
|
| Positive/Subtractive Decode: | Subtractive
|
| ISA/EIO Select: | ISA
|
| | |
|
| [Real-time Clock Configuration]
|
| RTC Positive Decode: | Enabled
|
| Lock Upper RTC RAM Bytes: | Absent
|
| Lock Lower RTC RAM Bytes: | Absent
|
| Upper RTC RAM: | Disabled
|
| RTC: | Enabled
|
| |
|
| [General Information]
|
| Device Name: | Intel 82371AB/EB PIIX4/E - IDE Controller [B-0/A-0]
|
| Original Device Name: | Intel 82371AB/EB PIIX4/E - IDE Controller [B-0/A-0]
|
| Device Class: | IDE Controller
|
| Revision ID: | 1
|
| PCI Address (Bus:Device:Function) Number: | 0:1:1
|
| PCI Latency Timer: | 32
|
| Hardware ID: | PCI\VEN_8086&DEV_7111&SUBSYS_00000000&REV_01
|
| | |
|
| [System Resources]
|
| Interrupt Line: | N/A
|
| Interrupt Pin: | N/A
|
| I/O Base Address 4 | E000
|
| | |
|
| [Features]
|
| Bus Mastering: | Enabled
|
| Running At 66 MHz: | Not Capable
|
| Fast Back-to-Back Transactions: | Capable
|
| | |
|
| [IDE Timing Modes (Primary Channel)]
|
| IDE Decode: | Enabled
|
| Slave IDE Timing Register: | Enabled
|
| IORDY# Sample Point: | 3 clocks
|
| Recovery Time: | 2 clocks
|
| DMA Timing Only (drive 1): | Disabled
|
| Prefetch And Posting (drive 1): | Enabled
|
| IORDY# Sample Point (drive 1): | Enabled
|
| Fast Timing Bank (drive 1): | Enabled
|
| DMA Timing Only (drive 0): | Disabled
|
| Prefetch And Posting (drive 0): | Enabled
|
| IORDY# Sample Point (drive 0): | Enabled
|
| Fast Timing Bank (drive 0): | Enabled
|
| | |
|
| [IDE Timing Modes (Secondary Channel)]
|
| IDE Decode: | Enabled
|
| Slave IDE Timing Register: | Enabled
|
| IORDY# Sample Point: | 3 clocks
|
| Recovery Time: | 2 clocks
|
| DMA Timing Only (drive 1): | Disabled
|
| Prefetch And Posting (drive 1): | Enabled
|
| IORDY# Sample Point (drive 1): | Enabled
|
| Fast Timing Bank (drive 1): | Enabled
|
| DMA Timing Only (drive 0): | Disabled
|
| Prefetch And Posting (drive 0): | Enabled
|
| IORDY# Sample Point (drive 0): | Enabled
|
| Fast Timing Bank (drive 0): | Enabled
|
| | |
|
| [Slave IDE Timing]
|
| Secondary Drive 1 IORDY# Sample Point: | 3 clocks
|
| Secondary Drive 1 Recovery Time: | 2 clocks
|
| Primary Drive 1 IORDY# Sample Point: | 3 clocks
|
| Primary Drive 1 Recovery Time: | 2 clocks
|
| | |
|
| [Ultra DMA/33 Control]
|
| Primary Drive 0 UDMA: | Enabled
|
| Primary Drive 1 UDMA: | Enabled
|
| Secondary Drive 0 UDMA: | Enabled
|
| Secondary Drive 1 UDMA: | Enabled
|
| | |
|
| [Ultra DMA/33 Timing]
|
| Primary Drive 0 Cycle Time: | CT=2 PCICLK, RP=4 PCICLK
|
| Primary Drive 1 Cycle Time: | CT=2 PCICLK, RP=4 PCICLK
|
| Secondary Drive 0 Cycle Time: | CT=2 PCICLK, RP=4 PCICLK
|
| Secondary Drive 1 Cycle Time: | CT=2 PCICLK, RP=4 PCICLK
|
| |
|
| [General Information]
|
| Device Name: | Intel 82371AB/EB PIIX4/E - USB Host Controller [B-0/A-0]
|
| Original Device Name: | Intel 82371AB/EB PIIX4/E - USB Host Controller [B-0/A-0]
|
| Device Class: | USB UHCI Controller
|
| Revision ID: | 1
|
| PCI Address (Bus:Device:Function) Number: | 0:1:2
|
| PCI Latency Timer: | 32
|
| Hardware ID: | PCI\VEN_8086&DEV_7112&SUBSYS_00000000&REV_01
|
| | |
|
| [System Resources]
|
| Interrupt Line: | N/A
|
| Interrupt Pin: | INTD#
|
| I/O Base Address 4 | D800
|
| | |
|
| [Features]
|
| Bus Mastering: | Enabled
|
| Running At 66 MHz: | Not Capable
|
| Fast Back-to-Back Transactions: | Capable
|
| | |
|
| USB Version Supported: | 1.0
|
| | |
|
| [Serial Bus Release Number:]
|
| USB Specification Release Number: | 1.0
|
| | |
|
| [Legacy Support]
|
| USB PIRQ: | Enabled
|
| Trap Caused By Write To PORT 64h: | No
|
| Trap Caused By Read From PORT 64h: | No
|
| Trap Caused By Write To PORT 60h: | No
|
| Trap Caused By Read From PORT 60h: | No
|
| SMI At End Of A20GATE Pass-Through: | Disabled
|
| A20GATE Pass-Through Sequence In Progress: | No
|
| A20GATE Pass-Through Sequence: | Disabled
|
| Trap/SMI On USB IRQ: | Disabled
|
| Trap/SMI On PORT 64h Write: | Disabled
|
| Trap/SMI On PORT 64h Read: | Disabled
|
| Trap/SMI On PORT 60h Write: | Disabled
|
| Trap/SMI On PORT 60h Read: | Disabled
|
| | |
|
| [Miscellaneous Status]
|
| RTC Index Read: | Disabled
|
| |
|
| [General Information]
|
| Device Name: | Intel 82371AB PIIX4 - Power Management Controller [B-0]
|
| Original Device Name: | Intel 82371AB PIIX4 - Power Management Controller [B-0]
|
| Device Class: | Other Bridge
|
| Revision ID: | 1
|
| PCI Address (Bus:Device:Function) Number: | 0:1:3
|
| PCI Latency Timer: | 0
|
| Hardware ID: | PCI\VEN_8086&DEV_7113&SUBSYS_00000000&REV_01
|
| | |
|
| [System Resources]
|
| Interrupt Line: | N/A
|
| Interrupt Pin: | N/A
|
| | |
|
| [Features]
|
| Bus Mastering: | Disabled
|
| Running At 66 MHz: | Not Capable
|
| Fast Back-to-Back Transactions: | Capable
|
| | |
|
| [Power-management I/O Ports]
|
| PM I/O Base Address: | E400
|
| | |
|
| [COUNT A]
|
| Slow Burst Count: | 2
|
| Idle Timer Count: | 0
|
| Device 11 Idle Timer Resolution: | 1 second
|
| Idle Timer Count C: | 0
|
| Idle Timer Count B: | 0
|
| SW Idle Timer Count: | 0
|
| Device 3 Idle Timer Resolution: | 8 second
|
| Device 2 Idle Timer Resolution: | 8 second
|
| Device 1 Idle Timer Resolution: | 8 second
|
| Device 0 Idle Timer Resolution: | 8 second
|
| Idle Timer Count A: | 0
|
| | |
|
| [COUNT B]
|
| Video Status: | Active
|
| Bus Master Timer Count: | 0
|
| Device 8 Idle Timer Resolution: | 1 second
|
| ZZ Signal: | Disabled
|
| Thermal Duty Cycle: | 75%
|
| Processor PLL Lock Cnt: | 0
|
| Processor PLL Lock Resolution: | 1 ms
|
| Fast Burst Timer Count: | 30
|
| | |
|
| [General-Purpose Input Control]
|
| GPI Select (DEV13): | Level
|
| GPI Select (DEV12): | Level
|
| GPI Polarity (DEV13): | Assert High
|
| GPI Polarity (DEV12): | Assert High
|
| GPI Polarity (DEV11): | Assert High
|
| GPI Polarity (DEV10): | Assert High
|
| GPI Polarity (DEV9): | Assert High
|
| GPI Polarity (DEV8): | Assert High
|
| GPI Polarity (DEV7): | Assert High
|
| GPI Polarity (DEV6): | Assert High
|
| GPI Polarity (DEV5): | Assert High
|
| GPI Polarity (DEV4): | Assert High
|
| GPI Polarity (DEV3): | Assert High
|
| GPI Polarity (DEV2): | Assert High
|
| GPI Polarity (DEV1): | Assert High
|
| GPI Enable (DEV13): | Disabled
|
| GPI Enable (DEV12): | Disabled
|
| GPI Enable (DEV11): | Disabled
|
| GPI Enable (DEV10): | Disabled
|
| GPI Enable (DEV9): | Disabled
|
| GPI Enable (DEV8): | Disabled
|
| GPI Enable (DEV7): | Disabled
|
| GPI Enable (DEV6): | Disabled
|
| GPI Enable (DEV5): | Disabled
|
| GPI Enable (DEV4): | Disabled
|
| GPI Enable (DEV3): | Disabled
|
| GPI Enable (DEV2): | Disabled
|
| GPI Enable (DEV1): | Disabled
|
| | |
|
| [Device Resource D]
|
| LPT DMA Select: | DACK0
|
| Device 11 IRQ12: | Enabled
|
| Device 11 IRQ1: | Enabled
|
| LPT Port: | Disabled
|
| LPT DMA Monitor: | Disabled
|
| Serial Port B Monitor: | Enabled
|
| Serial Port A Monitor: | Enabled
|
| FDC Monitor: | Enabled
|
| FDC DMA Monitor: | Enabled
|
| DACK7: | Disabled
|
| DACK6: | Disabled
|
| DACK5: | Disabled
|
| DACK3: | Disabled
|
| DACK1: | Disabled
|
| DACK0: | Disabled
|
| | |
|
| [Device Activity Event Selection A]
|
| Device 5 Reload Select: | Slow Burst Timer
|
| Device 3 Reload Select: | Slow Burst Timer
|
| Device 2 Reload Select: | Slow Burst Timer
|
| Device 1 Reload Select: | Slow Burst Timer
|
| Burst Timer Reload (DEV13): | Disabled
|
| Burst Timer Reload (DEV12): | Disabled
|
| Burst Timer Reload (DEV11): | Enabled
|
| Burst Timer Reload (DEV10): | Disabled
|
| Burst Timer Reload (DEV9): | Disabled
|
| Burst Timer Reload (DEV8): | Disabled
|
| Burst Timer Reload (DEV7): | Enabled
|
| Burst Timer Reload (DEV6): | Enabled
|
| Burst Timer Reload (DEV5): | Enabled
|
| Burst Timer Reload (DEV4): | Disabled
|
| Burst Timer Reload (DEV3): | Enabled
|
| Burst Timer Reload (DEV2): | Enabled
|
| Burst Timer Reload (DEV1): | Enabled
|
| Burst Timer Reload (DEV0): | Enabled
|
| Global Timer Reload (DEV13): | Disabled
|
| Global Timer Reload (DEV12): | Disabled
|
| Global Timer Reload (DEV11): | Enabled
|
| Global Timer Reload (DEV10): | Disabled
|
| Global Timer Reload (DEV9): | Disabled
|
| Global Timer Reload (DEV8): | Disabled
|
| Global Timer Reload (DEV7): | Enabled
|
| Global Timer Reload (DEV6): | Enabled
|
| Global Timer Reload (DEV5): | Disabled
|
| Global Timer Reload (DEV4): | Disabled
|
| Global Timer Reload (DEV3): | Disabled
|
| Global Timer Reload (DEV2): | Disabled
|
| Global Timer Reload (DEV1): | Disabled
|
| Global Timer Reload (DEV0): | Disabled
|
| | |
|
| [Device Activity Event Selection B]
|
| APMC: | Enabled
|
| Video: | Enabled
|
| Bus Utilization Threshold: | 64%
|
| Bus Utilization Threshold: | 64
|
| IRQ Global Reload: | Disabled
|
| IRQ8# Clock Event: | Disabled
|
| PME Clock Event: | Disabled
|
| KBD/Mouse Global Reload: | Enabled
|
| IRQ Clock Event: | Disabled
|
| IRQ0 Clock Event: | Disabled
|
| | |
|
| [Device Resource A]
|
| Device 8 EIO: | Disabled
|
| Device 13 EIO: | Disabled
|
| Device 12 EIO: | Disabled
|
| Device 11 KBD: | Disabled
|
| Graphics A/B Seg. Memory: | Disabled
|
| Graphics I/O: | Disabled
|
| Sound Blaster EIO: | Disabled
|
| Linear Frame Buffer Decode: | Disabled
|
| Linear Frame Buffer Mask: | 00000000
|
| Linear Frame Buffer Address: | 0
|
| MS Sound System Decode: | 530h-537h
|
| MS Sound System: | Disabled
|
| Sound Blaster Decode: | 220h-233h
|
| Game Port: | Disabled
|
| Sound Blaster 8/16-bit Decode: | Disabled
|
| MIDI Decode: | 300h-303h
|
| MIDI: | Disabled
|
| | |
|
| [Device Resource B]
|
| Game Port EIO: | Disabled
|
| KBD EIO: | Disabled
|
| Device 5 EIO: | Disabled
|
| FDC Decode: | Primary (3Fxh)
|
| LPT Controller Decode: | 3BCh-3BFh, 7BCh-7BEh
|
| MS Sound System EIO: | Disabled
|
| Device 9 Generic Decode Chip-select: | Enabled
|
| Device 9 EIO: | Enabled
|
| Device 9 Generic Decode Monitor: | Enabled
|
| MIDI EIO: | Disabled
|
| Device 9 Generic Decode Mask: | 7
|
| Device 9 Generic Decode Base: | 290
|
| | |
|
| [Device Resource C]
|
| Device 7 EIO: | Disabled
|
| Serial Port B Decode: | 2F8h-2FFh (COM2)
|
| Device 6 EIO: | Disabled
|
| Serial Port A Decode: | 3F8h-3FFh (COM1)
|
| Device 10 Generic Decode Chip-select: | Disabled
|
| Device 10 EIO: | Disabled
|
| Device 10 Generic Decode Monitor: | Disabled
|
| Device 10 Generic Decode Mask: | 0
|
| Device 10 Generic Decode Base: | 0
|
| | |
|
| [Device Resource E]
|
| Device 12 I/O Monitor: | Disabled
|
| Device 12 I/O Decode Mask: | 0
|
| Device 12 I/O Decode Base: | 0
|
| | |
|
| [Device Resource F]
|
| Device 12 Memory Decode Base: | 0
|
| Device 12 Memory Monitor: | Disabled
|
| Device 12 Memory Decode Mask: | 0
|
| | |
|
| [Device Resource G]
|
| Device 13 I/O Monitor: | Disabled
|
| Device 13 I/O Decode Mask: | 0
|
| Device 13 I/O Decode Base: | 0
|
| | |
|
| [Device Resource H]
|
| Device 13 Memory Decode Base: | 0
|
| Device 13 Memory Monitor: | Disabled
|
| Device 13 Memory Decode Mask: | 0
|
| | |
|
| [Device Resource I]
|
| Generic I/O Decode 0: | Disabled
|
| Generic Decode 0 I/O Mask: | 0
|
| Generic Decode 0 I/O Base: | 0
|
| | |
|
| [Device Resource J]
|
| Generic I/O Decode 1: | Disabled
|
| Generic Decode 1 I/O Mask: | 0
|
| Generic Decode 1 I/O Base: | 0
|
| | |
|
| [Miscellaneous Power Management]
|
| PM I/O Space: | Enabled
|
| | |
|
| [SMBase I/O Ports]
|
| SMBus I/O Base Address: | E800
|
| | |
|
| [SMBus Host Configuration]
|
| SMBus Interrupt Select: | SMI#
|
| SMBus Controller Host: | Enabled
|
| | |
|
| [SMBus Slave Command]
|
| SMBus Host Slave Command: | 0
|
| | |
|
| [SMBus Slave Shadow Port 1 Address]
|
| SMBus Shadow 1 Slave Address: | 0
|
| Shadow Port 1 R/W: | Disabled
|
| | |
|
| [SMBus Slave Shadow Port 2 Address]
|
| SMBus Shadow 2 Slave Address: | 0
|
| Shadow Port 2 R/W: | Disabled
|
| | |
|
| [SMBus Revision]
|
| SMBus Revision: | 0
|
| |
|
| [General Information]
|
| Drive Controller: | E-IDE (ATA-5)
|
| Host Controller: |
|
| Drive Channel: | Primary, Master
|
| Drive Model: | Seagate ST310212A
|
| Drive Firmware Revision: | 3.39
|
| Drive Serial Number: | 5EG28RM0
|
| Drive Capacity: | 9,541 MBytes (10 GB)
|
| Drive Capacity [MB]: | 9541
|
| ATA Major Version Supported: | ATA/ATAPI-5
|
| | |
|
| [Drive Geometry]
|
| Number of Cylinders: | 16383
|
| Number of Heads: | 16
|
| Sectors Per Track: | 63
|
| Number Of ECC Bytes: | 4
|
| Number of Sectors: | 16514064
|
| Total 32-bit LBA Sectors: | 19541088
|
| Logical Sector Size: | 512 Bytes
|
| Cache Buffer Size: | 512 KBytes
|
| | |
|
| [Transfer Modes]
|
| Sectors Per Interrupt: | Total: 32, Active: 32
|
| Max. PIO Transfer Mode: | 4
|
| Multiword DMA Mode: | Total: 2, Active: -
|
| Singleword DMA Mode: | Total: -, Active: -
|
| Ultra-DMA Mode: | Total: 4 (Ultra-DMA/66), Active: 2 (Ultra-DMA/33)
|
| Max. Multiword DMA Transfer Rate: | 16.7 MBytes/s
|
| Max. PIO with IORDY Transfer Rate: | 8.3 MBytes/s
|
| Max. PIO w/o IORDY Transfer Rate: | 16.7 MBytes/s
|
| Transfer Width: | 16-bit
|
| Native Command Queuing: | Not Supported
|
| TRIM Command: | Not Supported
|
| | |
|
| [Device flags]
|
| Fixed Drive: | Present
|
| Removable Drive: | Not Present
|
| Magnetic Storage: | Present
|
| LBA Mode: | Supported
|
| DMA Mode: | Supported
|
| IORDY: | Supported
|
| IORDY Disableable: | Supported
|
| | |
|
| [Features]
|
| Write Cache: | Present, Active
|
| S.M.A.R.T. Feature: | Present, Active
|
| Security Feature: | Not Present, Inactive
|
| Removable Media Feature: | Not Present, Disabled
|
| Power Management: | Present, Active
|
| Advanced Power Management: | Present, Active
|
| Packet Interface: | Not Present, Disabled
|
| Look-Ahead Buffer: | Present, Active
|
| Host Protected Area: | Present, Enabled
|
| Power-Up In Standby: | Not Suppported, Inactive
|
| Automatic Acoustic Management: | Supported, Inactive
|
| 48-bit LBA: | Not Suppported, Inactive
|
| Host-Initiated Link Power Management: | Not Supported
|
| Device-Initiated Link Power Management: | Not Supported
|
| In-Order Data Delivery: | Not Supported
|
| Hardware Feature Control: | Not Supported
|
| Software Settings Preservation: | Not Supported
|
| NCQ Autosense: | Not Supported
|
| Link Power State Device Sleep: | Not Supported
|
| Hybrid Information Feature: | Not Supported
|
| Rebuild Assist: | Not Supported
|
| Power Disable: | Not Supported
|
| All Write Cache Non-Volatile: | Not Supported
|
| Extended Number of User Addressable Sectors: | Not Supported
|
| CFast Specification: | Not Supported
|
| NCQ Priority Information: | Not Supported
|
| Host Automatic Partial to Slumber Transitions: | Not Supported
|
| Device Automatic Partial to Slumber Transitions: | Not Supported
|
| NCQ Streaming: | Not Supported
|
| NCQ Queue Management Command: | Not Supported
|
| DevSleep to Reduced Power State: | Not Supported
|
| Out Of Band Management Interface: | Not Supported
|
| | |
|
| [Security]
|
| Security Feature: | Not Supported
|
| Security Status: | Disabled
|
| Security Locked: | Disabled
|
| Security Frozen: | Disabled
|
| Enhanced Security Erase: | Not Supported
|
| Sanitize Feature: | Not Supported
|
| Sanitize Device - Crypto Scramble: | Not Supported
|
| Sanitize Device - Overwrite: | Not Supported
|
| Sanitize Device - Block Erase: | Not Supported
|
| Sanitize Device - Antifreeze Lock: | Not Supported
|
| Device Encrypts All User Data: | Not Supported
|
| Trusted Computing: | Not Supported
|
| | |
|
| [Self-Monitoring, Analysis and Reporting Technology (S.M.A.R.T.)]
|
| [01] Raw Read Error Rate: | 78/25, Worst: 75 (Data = 90538823,0)
|
| [03] Spin Up Time: | 98/Always OK, Worst: 98
|
| [04] Start/Stop Count: | 95/20, Worst: 95 (Data = 6028,0)
|
| [05] Reallocated Sector Count: | 100/36, Worst: 100 (Data = 22,0)
|
| [07] Seek Error Rate: | 77/30, Worst: 60 (Data = 52070744,1)
|
| [09] Power-On Hours/Cycle Count: | 77/Always OK, Worst: 77 (20361 hours / 2.32 years)
|
| [0A] Spin Retry Count: | 100/90, Worst: 100
|
| [0C] Power Cycle Count: | 99/Always OK, Worst: 99 (Data = 1299,0)
|
| [C5] Current Pending Sector Count: | 100/Always OK, Worst: 100
|
| [C6] Off-Line Uncorrectable Sector Count: | 100/Always OK, Worst: 100
|
| [C7] UltraDMA/SATA CRC Error Rate: | 200/Always OK, Worst: 200
|
| |
|
| [General Information]
|
| Drive Controller: | E-IDE (ATA-6)
|
| Host Controller: |
|
| Drive Channel: | Primary, Slave
|
| Drive Model: | Seagate ST320014A
|
| Drive Firmware Revision: | 3.07
|
| Drive Serial Number: | 5JZFPA5C
|
| Drive Capacity: | 19,092 MBytes (20 GB)
|
| Drive Capacity [MB]: | 19092
|
| ATA Major Version Supported: | ATA/ATAPI-5, ATA/ATAPI-6
|
| | |
|
| [Drive Geometry]
|
| Number of Cylinders: | 16383
|
| Number of Heads: | 16
|
| Sectors Per Track: | 63
|
| Number Of ECC Bytes: | 4
|
| Number of Sectors: | 16514064
|
| Total 32-bit LBA Sectors: | 39102336
|
| Logical Sector Size: | 512 Bytes
|
| Cache Buffer Size: | 2048 KBytes
|
| | |
|
| [Transfer Modes]
|
| Sectors Per Interrupt: | Total: 16, Active: 16
|
| Max. PIO Transfer Mode: | 4
|
| Multiword DMA Mode: | Total: 2, Active: -
|
| Singleword DMA Mode: | Total: -, Active: -
|
| Ultra-DMA Mode: | Total: 5 (ATA-100), Active: 2 (Ultra-DMA/33)
|
| Max. Multiword DMA Transfer Rate: | 16.7 MBytes/s
|
| Max. PIO with IORDY Transfer Rate: | 8.3 MBytes/s
|
| Max. PIO w/o IORDY Transfer Rate: | 16.7 MBytes/s
|
| Transfer Width: | 16-bit
|
| Native Command Queuing: | Not Supported
|
| TRIM Command: | Not Supported
|
| | |
|
| [Device flags]
|
| Fixed Drive: | Present
|
| Removable Drive: | Not Present
|
| Magnetic Storage: | Present
|
| LBA Mode: | Supported
|
| DMA Mode: | Supported
|
| IORDY: | Supported
|
| IORDY Disableable: | Supported
|
| | |
|
| [Features]
|
| Write Cache: | Present, Active
|
| S.M.A.R.T. Feature: | Present, Active
|
| Security Feature: | Present, Inactive
|
| Removable Media Feature: | Not Present, Disabled
|
| Power Management: | Present, Active
|
| Advanced Power Management: | Not Present, Inactive
|
| Packet Interface: | Not Present, Disabled
|
| Look-Ahead Buffer: | Present, Active
|
| Host Protected Area: | Present, Enabled
|
| Power-Up In Standby: | Not Suppported, Inactive
|
| Automatic Acoustic Management: | Supported, Active
|
| 48-bit LBA: | Not Suppported, Inactive
|
| Host-Initiated Link Power Management: | Not Supported
|
| Device-Initiated Link Power Management: | Not Supported
|
| In-Order Data Delivery: | Not Supported
|
| Hardware Feature Control: | Not Supported
|
| Software Settings Preservation: | Not Supported
|
| NCQ Autosense: | Not Supported
|
| Link Power State Device Sleep: | Not Supported
|
| Hybrid Information Feature: | Not Supported
|
| Rebuild Assist: | Not Supported
|
| Power Disable: | Not Supported
|
| All Write Cache Non-Volatile: | Not Supported
|
| Extended Number of User Addressable Sectors: | Not Supported
|
| CFast Specification: | Not Supported
|
| NCQ Priority Information: | Not Supported
|
| Host Automatic Partial to Slumber Transitions: | Not Supported
|
| Device Automatic Partial to Slumber Transitions: | Not Supported
|
| NCQ Streaming: | Not Supported
|
| NCQ Queue Management Command: | Not Supported
|
| DevSleep to Reduced Power State: | Not Supported
|
| Out Of Band Management Interface: | Not Supported
|
| | |
|
| [Security]
|
| Security Feature: | Supported
|
| Security Status: | Disabled
|
| Security Locked: | Disabled
|
| Security Frozen: | Disabled
|
| Enhanced Security Erase: | Not Supported
|
| Sanitize Feature: | Not Supported
|
| Sanitize Device - Crypto Scramble: | Not Supported
|
| Sanitize Device - Overwrite: | Not Supported
|
| Sanitize Device - Block Erase: | Not Supported
|
| Sanitize Device - Antifreeze Lock: | Not Supported
|
| Device Encrypts All User Data: | Not Supported
|
| Trusted Computing: | Not Supported
|
| | |
|
| [Self-Monitoring, Analysis and Reporting Technology (S.M.A.R.T.)]
|
| [01] Raw Read Error Rate: | 87/25, Worst: 77 (Data = 3990118,0)
|
| [03] Spin Up Time: | 97/Always OK, Worst: 97
|
| [04] Start/Stop Count: | 100/20, Worst: 100 (Data = 76,0)
|
| [05] Reallocated Sector Count: | 98/36, Worst: 98 (Data = 25,0)
|
| [07] Seek Error Rate: | 76/30, Worst: 60 (Data = 48549669,0)
|
| [09] Power-On Hours/Cycle Count: | 99/Always OK, Worst: 99 (1189 hours / 49.5 days)
|
| [0A] Spin Retry Count: | 100/Always OK, Worst: 100
|
| [0C] Power Cycle Count: | 100/20, Worst: 100 (Data = 940,0)
|
| [C2] Temperature | 25/Always OK, Worst: 52 (25.0 °C)
|
| [C3] Hardware ECC Recovered: | 100/Always OK, Worst: 253
|
| [C5] Current Pending Sector Count: | 100/Always OK, Worst: 100
|
| [C6] Off-Line Uncorrectable Sector Count: | 100/Always OK, Worst: 100
|
| [C7] UltraDMA/SATA CRC Error Rate: | 200/Always OK, Worst: 200
|
| [C8] Write/Multi-Zone Error Rate: | 100/Always OK, Worst: 253
|
| [CA] Data Address Mark Errors | 100/Always OK, Worst: 253
|
| |
|
| [General Information]
|
| Drive Controller: | E-IDE (ATA-6)
|
| Host Controller: |
|
| Drive Channel: | Secondary, Master
|
| Drive Model: | Seagate ST320014A
|
| Drive Firmware Revision: | 3.07
|
| Drive Serial Number: | 5JZFY7BR
|
| Drive Capacity: | 19,092 MBytes (20 GB)
|
| Drive Capacity [MB]: | 19092
|
| ATA Major Version Supported: | ATA/ATAPI-5, ATA/ATAPI-6
|
| | |
|
| [Drive Geometry]
|
| Number of Cylinders: | 16383
|
| Number of Heads: | 16
|
| Sectors Per Track: | 63
|
| Number Of ECC Bytes: | 4
|
| Number of Sectors: | 16514064
|
| Total 32-bit LBA Sectors: | 39102336
|
| Logical Sector Size: | 512 Bytes
|
| Cache Buffer Size: | 2048 KBytes
|
| | |
|
| [Transfer Modes]
|
| Sectors Per Interrupt: | Total: 16, Active: 16
|
| Max. PIO Transfer Mode: | 4
|
| Multiword DMA Mode: | Total: 2, Active: -
|
| Singleword DMA Mode: | Total: -, Active: -
|
| Ultra-DMA Mode: | Total: 5 (ATA-100), Active: 2 (Ultra-DMA/33)
|
| Max. Multiword DMA Transfer Rate: | 16.7 MBytes/s
|
| Max. PIO with IORDY Transfer Rate: | 8.3 MBytes/s
|
| Max. PIO w/o IORDY Transfer Rate: | 16.7 MBytes/s
|
| Transfer Width: | 16-bit
|
| Native Command Queuing: | Not Supported
|
| TRIM Command: | Not Supported
|
| | |
|
| [Device flags]
|
| Fixed Drive: | Present
|
| Removable Drive: | Not Present
|
| Magnetic Storage: | Present
|
| LBA Mode: | Supported
|
| DMA Mode: | Supported
|
| IORDY: | Supported
|
| IORDY Disableable: | Supported
|
| | |
|
| [Features]
|
| Write Cache: | Present, Active
|
| S.M.A.R.T. Feature: | Present, Active
|
| Security Feature: | Present, Inactive
|
| Removable Media Feature: | Not Present, Disabled
|
| Power Management: | Present, Active
|
| Advanced Power Management: | Not Present, Inactive
|
| Packet Interface: | Not Present, Disabled
|
| Look-Ahead Buffer: | Present, Active
|
| Host Protected Area: | Present, Enabled
|
| Power-Up In Standby: | Not Suppported, Inactive
|
| Automatic Acoustic Management: | Supported, Active
|
| 48-bit LBA: | Not Suppported, Inactive
|
| Host-Initiated Link Power Management: | Not Supported
|
| Device-Initiated Link Power Management: | Not Supported
|
| In-Order Data Delivery: | Not Supported
|
| Hardware Feature Control: | Not Supported
|
| Software Settings Preservation: | Not Supported
|
| NCQ Autosense: | Not Supported
|
| Link Power State Device Sleep: | Not Supported
|
| Hybrid Information Feature: | Not Supported
|
| Rebuild Assist: | Not Supported
|
| Power Disable: | Not Supported
|
| All Write Cache Non-Volatile: | Not Supported
|
| Extended Number of User Addressable Sectors: | Not Supported
|
| CFast Specification: | Not Supported
|
| NCQ Priority Information: | Not Supported
|
| Host Automatic Partial to Slumber Transitions: | Not Supported
|
| Device Automatic Partial to Slumber Transitions: | Not Supported
|
| NCQ Streaming: | Not Supported
|
| NCQ Queue Management Command: | Not Supported
|
| DevSleep to Reduced Power State: | Not Supported
|
| Out Of Band Management Interface: | Not Supported
|
| | |
|
| [Security]
|
| Security Feature: | Supported
|
| Security Status: | Disabled
|
| Security Locked: | Disabled
|
| Security Frozen: | Disabled
|
| Enhanced Security Erase: | Not Supported
|
| Sanitize Feature: | Not Supported
|
| Sanitize Device - Crypto Scramble: | Not Supported
|
| Sanitize Device - Overwrite: | Not Supported
|
| Sanitize Device - Block Erase: | Not Supported
|
| Sanitize Device - Antifreeze Lock: | Not Supported
|
| Device Encrypts All User Data: | Not Supported
|
| Trusted Computing: | Not Supported
|
| | |
|
| [Self-Monitoring, Analysis and Reporting Technology (S.M.A.R.T.)]
|
| [01] Raw Read Error Rate: | 84/25, Worst: 76 (Data = 130159963,0)
|
| [03] Spin Up Time: | 98/Always OK, Worst: 97
|
| [04] Start/Stop Count: | 100/20, Worst: 100 (Data = 1,0)
|
| [05] Reallocated Sector Count: | 66/36, Worst: 66 (Data = 349,0)
|
| [07] Seek Error Rate: | 71/30, Worst: 60 (Data = 12766148,0)
|
| [09] Power-On Hours/Cycle Count: | 100/Always OK, Worst: 100 (293 hours / 12.2 days)
|
| [0A] Spin Retry Count: | 100/Always OK, Worst: 100
|
| [0C] Power Cycle Count: | 100/20, Worst: 100 (Data = 245,0)
|
| [C2] Temperature | 27/Always OK, Worst: 44 (27.0 °C)
|
| [C3] Hardware ECC Recovered: | 100/Always OK, Worst: 253
|
| [C5] Current Pending Sector Count: | 100/Always OK, Worst: 86
|
| [C6] Off-Line Uncorrectable Sector Count: | 100/Always OK, Worst: 100
|
| [C7] UltraDMA/SATA CRC Error Rate: | 200/Always OK, Worst: 200
|
| [C8] Write/Multi-Zone Error Rate: | 100/Always OK, Worst: 253
|
| [CA] Data Address Mark Errors | 70/Always OK, Worst: 223 (Data = 30,0)
|