Re: Mod Master XT 1.0 Released : Play .MOD, .XM and .VGM on a 8088 4MHz

Posted on 2022-06-17, 17:48

by

by genocho

in Marvin \ Sound

in Marvin \ Sound

Hi, The GUS MAX use GF1 like the standard GUS so it should work. Can you try removing the Config file ? (MODMXT.CFG) I removed the cfg file and same issue, sound like channels cut off and on all the time, it sounds, but with this strange behaviour. I checked the mixer on the gus and all fine like …

---

Re: Mod Master XT 1.0 Released : Play .MOD, .XM and .VGM on a 8088 4MHz

Posted on 2022-06-17, 15:15

by

by genocho

in Marvin \ Sound

in Marvin \ Sound

Hello, I have tried the mod master xt v1.0 with my gravis ultrasound max and when I play a mod for example I only hear part of the mod completely cut off and without synchronism, it is heard in chunks. My gus max is well configured (jumpers) and works well in pinball fantasies and other gus players …

---

Re: Mod Master XT 1.0 Released : Play .MOD, .XM and .VGM on a 8088 4MHz

Posted on 2022-06-17, 00:11

by

by genocho

in Marvin \ Sound

in Marvin \ Sound

Hello, I have tried the mod master xt v1.0 with my gravis ultrasound max and when I play a mod for example I only hear part of the mod completely cut off and without synchronism, it is heard in chunks. My gus max is well configured (jumpers) and works well in pinball fantasies and other gus players. …

---

Re: SCHNEIDER EURO PC I & II 26 PIN FLOPPY TO STANDARD 34 PIN IDC (TESTED AND WORKING)

Posted on 2021-03-19, 10:04

by

by genocho

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Hi from the present (that old post was from 2008), Wanted to add as a final conclusion that my home made cable also works with floppy emulators, tested it with my Lotharek´s HxC and working like a charm. Thanks.

---

Re: SCHNEIDER EURO PC II 26 PIN FLOPPY TO STANDARD 34 PIN IDC

Posted on 2021-03-18, 18:25

by

by genocho

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Are you kidding me Erik ??? Why you dont read the damn thread before ask such question ??? Who do you think did the cable, posted it here and put in risk fry his own euro pc ??? Of course I did the cable, back in 2008, 100% WORKING, still have the cable, when i pick a gotek i will tell if it works …

---

Re: SCHNEIDER EURO PC II 26 PIN FLOPPY TO STANDARD 34 PIN IDC

Posted on 2021-03-17, 20:41

by

by genocho

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Has anybody made this cable? I want to use it with a Gotek. Are you kidding me Erik ??? Why you dont read the damn thread before ask such question ??? Who do you think did the cable, posted it here and put in risk fry his own euro pc ??? Of course I did the cable, back in 2008, 100% WORKING, still …

---

Re: Schneider Euro PC

Posted on 2021-03-17, 20:26

by

by genocho

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

See this post on how to connect an Gotek to the EuroPC: https://www.vogons.org/viewtopic.php?f=9&t=19074 Not a gotek, a real and normal floppy drive. The original internal one in the euro pc it´s a sony 26 pin. I made the adaptor cable back in the day. Guess will work with a gotek, but my purpose …

---

Re: IBM 9" MODEL 200 MONITOR VIDEO PINOUT

Posted on 2021-01-24, 19:09

by

by genocho

in Marvin \ Video

in Marvin \ Video

Thank you, I posted also in VCFED, hope he find out. If not I will open it and try to find out. My guess is could be a mda/hercules but who knows, if someone put inside a power supply, maybe hacked something else. Monitor was used in spain, and if i power it shows contrast and brightness so looks …

---

Re: IBM 9" MODEL 200 MONITOR VIDEO PINOUT

Posted on 2021-01-24, 18:54

by

by genocho

in Marvin \ Video

in Marvin \ Video

Thanks for the reply rmay, The monitor comes with a 220 power cord, so dont need dc to fire up, so i guess that blue conector is for other use. About the din5 and the db-15 guess i have to open it up and make more pics, with a better camera. Always was wondering why the bezel was missing and that …

---

Re: IBM 9" MODEL 200 MONITOR VIDEO PINOUT

Posted on 2021-01-24, 09:35

by

by genocho

in Marvin \ Video

in Marvin \ Video

Page is helpful, but as you can see on my pic, my conector is a female db-15 besides the other two connectors din 5 and the blue d-7. Hope someone know about this strange connectors.

---

IBM 9" MODEL 200 MONITOR VIDEO PINOUT

Posted on 2021-01-23, 18:56

by

by genocho

in Marvin \ Video

in Marvin \ Video

Hi, Time ago i found this monitor on a thrift store. Now i have a bit of free time iam looking for a way to connect it to i guess an hercules / mda graphics card. In the back monitor have 3 conectors i presume for video, one is a female db-15, second is a round din 5 like pc xt keyboards or tandy, …

---

Gauntlet 1 Pc wont run in EGA

Posted on 2020-02-26, 17:21

by

by genocho

in Marvin \ Software

in Marvin \ Software

Hi, I noticed a problem with Gauntlet 1 on my PC XT with VGA (Trident 8900). Game shows intro, menus, etc, but after i select the character game goes to black screen. Dont know what could cause this issue, wonder if it´s the Ega mode not compatible with my vga card or a problem with my NECV20 CPU. …

---

Re: Schneider Euro PC

Posted on 2018-07-17, 17:01

by

by genocho

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Hola amigos. I've got composite video from Schneider euro xt (paradise PVC4) due to this card not really copy of CGA it has problems to demonstrate 8088mph, but works Hola !!! Do you have the schematics of that composite mod for the euro pc ??? I assume you need an additional circuitry to have the …

---

Re: Schneider Euro PC

Posted on 2018-06-19, 11:41

by

by genocho

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

I am trying to connect the PC to a colour monitor. I see the the Video Controll Chip has a PIN called CMPVD. Could this be Composite video output? Do you know if anybody has tried to use this pin to get Composite video? I just tried to connect wires from the to pins market in picture to see if …

---

Re: Schneider Euro PC

Posted on 2016-06-08, 01:26

by

by genocho

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Hi again, Was searching a bit on internet and as someone mentioned the commodore pc10-III have the paradise pvc4 chip onboard and includes cga composite output, dont know if all pcb´s revisions, but searching the schematic appears. Dont know if replicating the circuit for the euro pc makes the trick …

---

Re: Schneider Euro PC

Posted on 2016-06-06, 21:02

by

by genocho

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Maybe those 2 pins need to be activated and then make a conversion circuit like hal9000 did on his cga, or maybe those 2 pins are inverted and need a lm1881 or similar circuit. Who knows.

---

Re: Schneider Euro PC

Posted on 2016-06-06, 20:35

by

by genocho

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Jinxter, how you manage to get that cga composite output from the euro pc ? Can you make pics of the circuit and schematics ? P.D. You have to try and post pics of cga composite games like commander keen 4 (recent cga composite version), bruce lee, burger time, etc. I would love to add cga composite …

---

Re: SB 2.0 CT1350 CMS chips dumped

Posted on 2012-05-08, 11:52

by

by genocho

in Milliways

in Milliways

Hi, Just tested the new jed in my rev.0 ct1350 and Iam a little bit.....dissapointed. This are my settings: SB IN 220 IRQ5 WITH CMS JUMPER OFF Well, like that using the sbtest program i have fm music and voice, the test runs perfect. Paku paku with /cms option has no sound at all and monkey island …

---

Re: SB 2.0 CT1350 CMS chips dumped

Posted on 2012-05-01, 00:55

by

by genocho

in Milliways

in Milliways

Hi, Btw with a broken leg in a saa chip, you can try to run paku paku or monkey island with cms option. Maybe not sound perfect, but you notice if it sounds (with less channels). Do you have the cms off jumper on or off ??? Finally if you want to repair that broken leg you can try with this method. …

---

Re: SB 2.0 CT1350 CMS chips dumped

Posted on 2012-04-19, 01:47

by

by genocho

in Milliways

in Milliways

Has anyone tested the chuckg gal he posted here ??? http://www.vintage-computer.com/vcforum/showt … v0-CT1350/page4 Hope this can solve the issue !!! Regards.

---