VOGONS

Common searches


Search results

Display options

Schneider Euro SX 80386 BIOS config Help Needed

in Milliways
Hi guys! I just put my hands into this German-manufactured-beauty!! The 26Pin floppy disk doesn't seem to be working so I connected a Floppy emulator, formated the HDD and installed Ms-DOS 6.22 fresh. Now, the trouble seems to be that the PC doesn't recognise XMS Memory. In fact, there is a section …

Re: VGA Capture Thread

Nope. What you need for VGA2HDMIPro is a HDMI capture card since the scaler unit outputs digital signal via HDMI. The good news most modern consumer capture cards do have HDMI input. Avermedia, Startech and Elgato (something like used elgato game capture hd) would do. I think I've seen some …

Re: VGA Capture Thread

Nope. What you need for VGA2HDMIPro is a HDMI capture card since the scaler unit outputs digital signal via HDMI. The good news most modern consumer capture cards do have HDMI input. Avermedia, Startech and Elgato (something like used elgato game capture hd) would do. I think I've seen some …

Re: VGA Capture Thread

Well, thanks a lot for the answers guys. I finally found a "cheap" StarTech Professional VGA to HDMI Video Converter, VGA2HDMIPRO. (http://bit.ly/2ovwh5a) I'm going to try my luck with it after watching some of Phil's videos on Youtube. I'll let you know with the result. AS I stated before, my idea …

Re: VGA Capture Thread

Hi Guys, I have been reading the whole thread and can't really figure out what would be the best for what I want to do. Any help would be highly appreciated. Basically I want to record gameplays from my Pentium 133mhz using a S3 Trio +64 and post them on youtube. I don't want to use emulation and …

Re: VGA Capture Thread

Hi Guys, I have been reading the whole thread and can't really figure out what would be the best for what I want to do. Any help would be highly appreciated. Basically I want to record gameplays from my Pentium 133mhz using a S3 Trio +64 and post them on youtube. I don't want to use emulation and …

Yamaha Audician 32 vs Sound Blaster Pro 2 CT1600

Hi guys, I own a Yamaha Audician 32 plus ISA soundcard and I'm very happy with it. I was wondering if anybody has compared the Audician with the great SB Pro 2 CT1600. I've been after this soundcard for a while now and I would like to know what are the differences in terms of FM sound quality, bass, …

What CRT monitor to choose. Philips vs Hyundai

in Milliways
Hi guys, tomorrow IK'm going to buy a CRT monitor. I already have a 14'" one but I would like get a bigger one. I'm going to connect it to my Pentium computer to play MS-DOs games (no windows) https://farm5.staticflickr.com/4318/36009583076_b1e62b3359_o.jpg So, I have to options. What I'm worried is …

Re: SCSI CD ROM Ms-DOS Config

in Milliways
luckybob wrote: probably the wrong .sys file for the scsi controller. judging by the bios screen you have this card: https://storage.microsemi.com/en-us/support/s … 2940/aha-2940w/ Give that file a shot, maybe also update the card's firmware. Hi! Thanks a lot, that did the job. Much appreciated!

SCSI CD ROM Ms-DOS Config

in Milliways
Hi guys. I just got a new CD-ROM Drive. A Hemlett Packard CD-writter Plus 9200 series SCSI version. https://c1.staticflickr.com/4/3836/33202943101_bcd7819275_c.jpg" I had no idea it was SCSI when I got it off Ebay. So once I got it, I had to buy a PCI card to SCSI and the damn cable...ended up …

Re: Help finding mobo info

in Milliways
Ok, so I threw a Pentium 200mmx and the weird thing is that the motherboard recognises that there's an mmx cpu but it will only go up to 166mhz. Other thing I'm trying to do is connect ps/2 mouse but I see that the ps2 port on the mainboard has 8 pins. Any ideas on the order of the pins? Yellow, Red …

Re: Help finding mobo info

in Milliways
Ok guys founded! The info was on the back of the board. It's a Lucky Star LS-P54CE rev:F It doesn't take MMX sadly 🙁 Anyway, if I pur a 200mmx would that be bad for the CPU or the motherboard?

Help finding mobo info

in Milliways
Hi guys, Just got this motherboard but I can't seem to find the model. I want to check if it supports mmx tech. Any help is appreciated my fellow vogoners!

Re: Faulty SB16 bought on advice!!

in Milliways
There is no way to tell for sure that only changing the LM340T5 would fix things, maybe because it shorted inside something else got killed too... Also the card really needs a cood cleaning before anything else, I see humidity corrosion everywhere... Yes you're right, the card is in pretty bad …

Faulty SB16 bought on Ebay, advice!!

in Milliways
Hi guys, I bought a Sound BLaster 16 CT2230 on Ebay. I tested it and it doesn't work. I had previous SB16 soundcards and installed them, installed drivers, etc. It is not the first time I do this. The thing is, I turn the computer on, and it says that the Sound Card is not recognised. I take the …

Re: New Retrorig advice

in Milliways
No? You dont think any of them is worth it? What should I do?? Hahahaha.....I'm not in a hurry actually. When I see something is worth it, a bargain, or a case I really like I'll buy it! 😀

Page 1 of 22