Dfi K6BV3+ /66 bios problem.

Posted on 2015-11-14, 16:53

by

by Nahkri

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

I got this board revision B,it came with what seems to be the latest bios,dated 12.04.00 and with the code 2A5LED4G. But after installing win 98se,the problem with "When use AT POWER,­ WIN-98 can not display shutdown message.­" it's still present,altough the latest bios should have solved it. So i …

---

Re: Bought these (retro) hardware today

Posted on 2015-11-04, 20:31

by

by Nahkri

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Bought 2 dfi boards: - K6BV3+ /66 via mvp3 , it came with a K6-2 500mhz. - CA61 via apollo 133, came with a pentium 3-733mhz, it works but needs a couple of caps replaced.

---

Re: What do you drive?

Posted on 2015-11-03, 14:46

by

by Nahkri

in Milliways

in Milliways

Mitsubishi Lancer.

---

Re: K6-2+/III+ slowdown issues on ALi Aladdin V

Posted on 2015-10-23, 16:09

by

by Nahkri

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

So i re done the test with a pci voodoo 3 2000 overclocked at 166mhz 3dmark99:640x480 - 3489(cpu 8111) 800x600 - 3503(cpu 8117) 1024x768 - 3384(cpu 8017) 3dmark2000:640x480 - 1917 800x600 - 1902 1024x768 - 1873 Unreal Gold: 640x480 - 57.54 800x480 - 55.01 1024x768 - 48.07 Incoming:640x480 - 80.97 …

---

Re: K6-2+/III+ slowdown issues on ALi Aladdin V

Posted on 2015-10-19, 12:41

by

by Nahkri

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

I have a voodoo 3 2000 pci,if u want,i could try in the weekend,to oc it to 3000 speed and run the tests see if there is any difference.

---

Re: K6-2+/III+ slowdown issues on ALi Aladdin V

Posted on 2015-10-19, 11:23

by

by Nahkri

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

philscomputerlab wrote: Is this disabled by loading the BIOS defaults? Might check my GA-5AX with a V3 and check it out... I think it's enabled by loading bios defaults,at least on my board,becouse i don't remeber enabling it.

---

Re: Do you leave empty slots between cards?

Posted on 2015-10-18, 06:06

by

by Nahkri

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

I usually put the soundcard on the last isa or pci slot, in order to reduce interference from rest of components inside the case,I remember reading an article back in a magazine back in the 90.

---

Re: K6-2+/III+ slowdown issues on ALi Aladdin V

Posted on 2015-10-17, 18:22

by

by Nahkri

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

I'm using: Ali integrated driver vers 1.091. Standard voodoo 3 drivers vers. 1.07.00(the last official,not beta,drivers for the v3) + 3dfx tool(for disable-ing vsync) Montego A3Extreme 1187 driver for the sound card. Except nusb to be able to use usb sticks,i don't have installed any other kind of …

---

Re: K6-2+/III+ slowdown issues on ALi Aladdin V

Posted on 2015-10-17, 10:37

by

by Nahkri

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Shogo: 640x480 - 57.224 fps 800x600- 56.074 fps 1024x768- 47.829 fps Unreal gold: 640x480 - 55.424 fps 800x600 - 53.021 fps 1024x768 - 47.064 fps Incoming: 640x480 - 75.04 fps 800x600 - 76.37 fps 1024x768 - 70.69 fps Mdk 2:640x480- 37.605 fps 800x600-38.014 fps 1024x768-37.31 fps I retested Dehtkarz …

---

Re: K6-2+/III+ slowdown issues on ALi Aladdin V

Posted on 2015-10-16, 17:51

by

by Nahkri

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

I ran 3dmark 99,2000 and dethkarz and i got this results: 3dmark 99: 640x480-3522 -8076 cpu 800x600-3504 -8157 cpu 3dmark 2000:640x480-1930 800x600-1918 1024x768-1884 Dethkarz:640x480-62.35 fps 800x600-61.64 fps 1024x768-54.04 fps Will test shogo and unreal gold edition tommorow,i don't have the …

---

Re: My Pentium MMX machine

Posted on 2015-10-15, 13:33

by

by Nahkri

in Marvin \ System Specs

in Marvin \ System Specs

I use the same Jetway motherboard,but with a more powerfull config and it's a good solid board. My only problem with it was:the cpu socket placement,since i only had a taller cpu cooler,when i built the system,i had to cut a small part of metal from the case hard drive cage so i could fit the …

---

Re: Surviving the late 90's without 3Dfx

Posted on 2015-10-02, 09:43

by

by Nahkri

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

I survived from 1996-2000 with a Dataexpert,ExpertColor branded S3 trio 64 V+,1 mb of ram http://web.archive.org/web/19970201080146/http://www.dataexpert.com.tw/ I wanted a Voodoo Graphics,but was never able to raise the money for 1. Got close to buy a Matrox Mystique with 2 mb of ram once,but i …

---

Re: Problem with d-sub and dvi videocard connectors

Posted on 2015-09-14, 09:45

by

by Nahkri

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

I got another monitor and checked the cards again. The 1 with the d-sub doesn't display the problem with the new monitor. The dvi 1 still has the problem,if i move the cable in some position the screen even goes blank. I took pictures of the dvi connectors seems to be corosion on them. http://i1373. …

---

Re: Problem with d-sub and dvi videocard connectors

Posted on 2015-09-13, 13:24

by

by Nahkri

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Yes I did, with them screwed in the colours are wrong, only by unscrewing them and holding the connector wth my hand in a certain position, I get corect image, as soon as I let go it turns blue again.

---

Re: Problem with d-sub and dvi videocard connectors

Posted on 2015-09-13, 08:06

by

by Nahkri

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

I don't think it's the cable since i only get the problem with this 2 cards,other cards i used don't give me the issue. Changing the cable it's impossible since it's not detachable from the monitor. In the case of the dvi video card i need to use a dongle since the monitor had only d-sub,but also …

---

Problem with d-sub and dvi videocard connectors

Posted on 2015-09-12, 18:52

by

by Nahkri

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

I have the same problem on 2 videocards,1 with d-sub and 1 with dvi. When i plug the monitor cable,the image on the screen has a blueish tint. If i jiggle the connector a little i get to a position where the colours are fine,but as soon as i let go it becomes blueish again It's clear the connectors …

---

Re: Worst video card ever, again

Posted on 2015-09-12, 07:37

by

by Nahkri

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

I been testing a Laguna 3d,agp version with 4 mb of ram and it's not that bad.U can play some old 3d games on it. So far i tried it with fifa 98 rtwc and it looks fine and works ok.

---

Re: No FM synthesis output from sound card

Posted on 2015-09-10, 12:07

by

by Nahkri

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Did u try to plug the speakers into the line connector?see if u get sound?

---

Re: Still working on finding my Windows 98 SE Final Build...

Posted on 2015-09-10, 09:08

by

by Nahkri

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

When i bought my first pc at the end of 1996,my at case also had a 3 digit led display,which was necesary since my cpu was a k5-100mhz. Also the display was programable without jumpers,u had to press a combination of the reset and turbo button from what i remeber. And ofc i dumped that case in 2005, …

---

Re: Bought these (retro) hardware today

Posted on 2015-09-06, 20:10

by

by Nahkri

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Apparantly the pci express version of the fx5700 is called the 5750 by Asus, never knew that :lol: . I hate how Asus names their videocards,don't know why they couldn't just write on a sticker on the card the model of the chipset. Especially when u are at a flea market u find a card and then u have …

---