Search \ VOGONS

Login

Login

Username

Password

2FA token (optional)

Remember me

Hide my online status this session

Lost password
Send activation email

or Create a new account
Create a new account

Common searches

Active topics

Search results

Display options

Re: Windows 2000 on P100 vs Win98

Posted on 2024-05-28, 16:41

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

I ran Windows 2K on a Pentium Pro 166 and it felt slow as a dog compared to Win98SE. I'm just wondering because the Pentium Pro did not work well with 16 bit code still being used in Win98SE. But the Pentium Pro should run well with any full 32 bit system like Windows 2000. But perhaps the RAM is …

Re: Which USB 2.0 cards for old motherboards

Posted on 2023-10-19, 12:36

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

I would avoid usb mouses as much as I can All my systems use m590 with logi dongle as standard issue via nec 2.0. otherwise it's recommended sticking to intellimouse optical usb 1.1A for compatibility USB Mouses are nice and convenient but they tend to have a higher performance impact on old …

Re: Playing Doom 1/2 multipleyer using Infrared, is it possible?

Posted on 2023-10-09, 14:24

in DOS

in DOS

Oh according to this website https://razorback95.com/resources/videos/video-243 The virtual COM created by windows is not visible to MS-DOS applications 😒

Playing Doom 1/2 multipleyer using Infrared, is it possible?

Posted on 2023-10-07, 18:43

in DOS

in DOS

Well, I have tried to play doom under windows 98 using COM4 with Infrared, but it doesn't seems to do anything when I select the serial connectivity. So in short, is it possible to play Doom under IrDA? or even other ms-dos games? ( So far the only games that I managed to play with infrared were …

Re: Voodoo 3 2000 Artifacts and noisy video.

Posted on 2023-08-29, 09:12

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Old to the party but Vooodoo 3 works quite well with a Pentium MMX 233, it's a great card for DOS games and also early 3D games. ofc it's a card that has more power to deliver with strong cards, but the drivers are enough optimised to allow it to run just fine on old Pentium MMX machines (and never …

Re: Which USB 2.0 cards for old motherboards

Posted on 2023-08-29, 09:08

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

I would avoid usb mouses as much as I can

Re: I/O Performance Impact Benchmark

Posted on 2023-08-19, 07:58

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

I have tested it on a laptop. I totally missed the model when reading first post, sorry https://www.thinkwiki.org/wiki/Category:235 = USB 1.1 Host Controller (OHCI). PCMCIA USB board usb 2.0? About the Graph sorry for being confused, but let me explain,on the first vertical line I have the …

Re: I/O Performance Impact Benchmark

Posted on 2023-08-09, 04:16

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

I dont understand the picture at all :( USB 2.0 has HUGE impact on performance of lower end systems, and judging by 10-16 fps you are running something socket7 https://www.vogons.org/viewtopic.php?f=46&t=39172 USB 1 is better, but still bad I have tested it on a laptop. About the Graph sorry for …

I/O Performance Impact Benchmark

Posted on 2023-08-07, 02:38

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

on old systems, I feel like benchmark numbers kinda cheat to the reality of how the game plays, so I have decided to create a benchmark running Quake 2 on the lowest settings to compare the performance impact of not interacting at all with the system with interacting with it while running the …

PCMCIA ZV 3DFX in FPGA, could it be possible?

Posted on 2023-08-07, 02:21

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Do you guys think such product could exist? Here are the imaginary specs: - PCMCIA board that requires zoomed video support in order to render on the main display (so it works as a voodoo 1 or 2) - Voodoo 2 or 1 specs. - 16MB of video ram. - 3D Only. despite having an inferior performance to a PCI …

Re: Ibm Thinkpad 235

Posted on 2023-07-29, 06:46

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Great news, I managed to fix my IBM! Al I had to do was to replace the fuse by this one 32V 2.5a So now that this setup is properly working with USBC Her are some numbers: - CPU from 12% power to 100% (233MHz) has a 5 Watts increase. - Total System Power is 18 Watts. - Charging both batteries adds 6 …

Re: Ibm Thinkpad 235

Posted on 2023-07-05, 04:24

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Hi @ibm5155. I just got one of these. Can you describe to me the steps you took to get to the hard drive? I don't want to break anything along the way so any advice and steps you can give would be much appreciated! Replacing the hard drive will be tricky since it's on the opposite side of the …

Re: Ibm Thinkpad 235

Posted on 2023-03-16, 14:18

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

I did the same thing with this : I could never fix it.... (lack of knowledge to find fault). I suspected it was something simple since the laptop was working with battery despite not working on AC and i found out the battery circuit is connected to the AC one, a multimeter deffo would help to test …

Re: Ibm Thinkpad 235

Posted on 2023-03-16, 13:14

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

I Accidentally plugged a 20v AC on it and it stopped working, luckily, only a fuse went bad, glad the board has a description on the type of the fuse (FO 32v 2.5A). doing direct contact on the fuse made machine to boot so now it's just a mater of trying to find a new fuse. By the way, I managed to …

Re: Windows 98SE - USB mouse extremely slow, am I missing something obvious?

Posted on 2023-02-10, 10:46

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Sorry for the resurrect, but on the topic, I noticed that Logitech G703 freezes the OS when moving the mouse and after a few miliseconds once stopped it seems to unblock the os. I also noticed it tends to run smoother if you use the wired usb option instead of the wireless one (perhaps it does some …

Re: PCMCIA slot with Zoomed video Question

Posted on 2023-01-25, 12:01

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

There is atleast one capture card that support ZV, the Margi Capture-to-Go, it also has svideo input. Most capture cards don't support ZV, and only had composite video input, like Nogatech, Iodata, Ratoc, IBM. What are the specs of the laptop? IBM Thinkpad 235 Pentium MMX233, 96MB Ram, C&T F655555 …

Looking for a specific PCMCIA card with ZV support for Windows 98

Posted on 2023-01-23, 14:55

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

It's a tricky question and I am failing to search for it, so here's the questions. Do you guys know any PCMCIA card that has ZV support and preferably FM Radio tuning? I am aware that Analogue TV tuning is kinda dead nowadays but if the board comes with composite input it'll be a big plus.

PCMCIA slot with Zoomed video Question

Posted on 2022-11-17, 12:05

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

I was wondering if it would be possible to use an old laptop with ZV as an external monitor. I am aware the resolution is kinda low but it would be a perfect use case for me if possible. So far the only options I saw were pcmcia cards that capture TV/composite signals but those seems kinda low res ( …

Re: Ibm Thinkpad 235

Posted on 2022-10-01, 12:06

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

ThinkpadIL wrote on 2022-10-01, 08:46: ibm5155 wrote on 2022-10-01, 07:28: - comes with an external Floppy Disk drive plugged to the SCSI port. It's not a SCSI, but a Parallel Port. Indeed, ty for pointing out.

Re: Ibm Thinkpad 235

Posted on 2022-10-01, 07:28

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Pictures/Videos Items/Laptop https://imgur.com/CGDjHLZ.jpeg https://imgur.com/pv1mSje.jpeg https://imgur.com/jIZxtz7.jpeg https://imgur.com/QnMhYLg.jpeg https://imgur.com/rP03uQC.jpeg https://imgur.com/Pmak3sv.jpeg https://imgur.com/9CQUbQW.jpeg https://imgur.com/lYYU1V6.jpeg https://imgur.com/ …

Page 1 of 16

Go to top of page Go to top of page