VOGONS

Common searches


Search results

Display options

Re: Dell Optiplex GX Pro - Where to Find Microprocessor Add-in Card or Terminator Card?

I found another terminator card on eBay, but it is not a Dell branded part. It's a Foxconn 6B-TCPH-9055. It was super cheap, so if it doesn't work it's no big loss. Edit: I also just found a Dell 9912P Slot 1 terminator card on eBay. I went ahead and ordered it too. Any idea if either of these Slot …

Re: Dell Optiplex GX Pro - Where to Find Microprocessor Add-in Card or Terminator Card?

OK, so I have a Dell Optiplex GX Pro that I got off of OfferUp. I tried powering it up today and on initial boot I got the error message "Terminator/processor card not installed! System HALTED!" and it won't boot. This system has a Pentium Pro 200 CPU. It also has a microprocessor add-in card slot …

Re: Need Help Booting Windows 2000 from an SSD

Instructions directly from Macrium: http://reflect.macrium.com/help/v5/how_to/conversions/convert_to_a_solid_state_disk.htm Looks like Vista / 2008 and later is not nearly as involved when cloning from HDD to SSD. Before that requires extra steps. Thanks. I'll give that a try. Any idea why Windows …

Re: Need Help Booting Windows 2000 from an SSD

I will add to this. You can't just clone a HDD to a SSD. It will never work. You must use software that specifically supports cloning from a HDD to a SSD so it can take care of the differences. Also... what size is the SSD? Is the BIOS detecting it properly? I've cloned a HDD to an SSD before with …

Re: Need Help Booting Windows 2000 from an SSD

I will add to this. You can't just clone a HDD to a SSD. It will never work. You must use software that specifically supports cloning from a HDD to a SSD so it can take care of the differences. Also... what size is the SSD? Is the BIOS detecting it properly? I've cloned a HDD to an SSD before with …

Re: Need Help Booting Windows 2000 from an SSD

I will add to this. You can't just clone a HDD to a SSD. It will never work. You must use software that specifically supports cloning from a HDD to a SSD so it can take care of the differences. Also... what size is the SSD? Is the BIOS detecting it properly? I've cloned a HDD to an SSD before with …

Re: Need Help Booting Windows 2000 from an SSD

bloodem wrote on 2020-12-18, 18:00: Error "0x0000007B" means inaccessible boot device. Access the BIOS, go to the IDE Configuration section and switch the Onboard IDE operation mode from "Enhanced Mode" to "Compatible mode". Then try the installation again. I switched to "compatible mode" and got …

Need Help Booting Windows 2000 from an SSD

Ok. I have an Asus P4P800e mb with a Pentium 4 3.2 ghz CPU, 4 gb ram. I tried to install Windows 2000 on an ssd, but it would not install and I got a bsod. I then installed Windows 2000 on a hard drive. This worked fine. Therefore, I imaged the hard drive and cloned it to the ssd. I then swapped out …

Page 1 of 13