Nexxen wrote on 2021-12-10, 10:19: Try with 2 sticks or ram, set voltage and multiplier as for a 200mhz cpu. Works on a board I have. Hmm... I can give it a try. What voltage should I set? 3.3v??

It's a drop in replacement and should work without any tinkering. That's what I thought, it should be like a PnP chip on my socket 8 board, but it seems that some motherboards can be a bit finicky to work with. I had a few over the years but eventually sold them off. Not much improvement over P-Pro …

Bought this little chip NOS, but alas, my 82440FX motherboard could not POST once I installed it; all I got is just a black screen 😑 Any idea how I can get it running? I am using a PCPartner MB600n that comes with a standard Intel 82440FX chipset. I have used all possible host clock, multiplier, and …

Thanks to ssshake, your input puts a light into my tunnel. It seems to me that the line that actually reads the config file (CTPNP.cfg) is DIAGNOSE.EXE/S I had been scratching my head to get my CT2760 card working under pure DOS mode by forcing the software to read the config file. Problem is, which …

NyLan wrote on 2020-08-05, 17:00: I would personally create a bootable floppy disk and Trim from DOS. Depending of your usage from once a month to once a year 😀 Care to share what sort of bootable floppy disk you are talking about here?

Sorry to necro this thread, but I recently discovered an exactly similar issue to my 486 machine when playing either XCOM UFO Defense or XCOM2 Terror from the Deep. Both games produces similar issues, i.e. crackling sound on top of the background music. The soundcard used on my motherboard is a …

Got the drivers! I'll test soon and upload them to Vogonsdrivers. So excited! Seems like this might be a nice controller after all — it mentions support for 50MHz FSB at 0 wait state Speaking of 50Mhz, if you notice between page 8 and 9 of the manual, there is conflicting information about how VL- …

jheronimus wrote on 2020-06-27, 13:50: Got the drivers! I'll test soon and upload them to Vogonsdrivers. So excited! Seems like this might be a nice controller after all — it mentions support for 50MHz FSB at 0 wait state How did you go with the test? Is there any major improvement in terms of the …

Got the drivers! I'll test soon and upload them to Vogonsdrivers. So excited! Seems like this might be a nice controller after all — it mentions support for 50MHz FSB at 0 wait state Cool bananas! If you could upload them, that would be great. Does it mean a motherboard with 40Mhz base clock can …

I saw one eBay seller who currently sells this particular card right now. https://www.ebay.com.au/itm/114255314650 The seller has been kind enough to manually supply me with each page of the manual, photographed one by one. I have attached it here for future reference. The seller also happens to …

Thanks for showing us this information. How thick are your insulated wires? Also, what's the part near the end of the audio socket called?