Ok, finally found a good driver 43.45, the version 71 driver control panel didn't work, installed 43.45 over the other and directx 8.0a and now everything is working perfect. So to summarize installing 95C on a P2B I will make sure to install USB supplements first, then the chipset driver, then …

derSammler I found the USB update on the 95 disk I never knew you had to install them! :) once I did that I reran the intel chipset driver and upon reboot it picked up the USB!! Thank you so much! now I just need to figuere out this nvidia thing. its running version 12 something nvidia drivers since …

Hello, I did a fresh install on a PII 400 asus P2B and I cannot get usb drivers to install, I tried the 3.20 intel chipset utility and it installs the IDE drivers and other stuff but no USB. Also when I tried to install my asus V7700ti (32mb Geforce 2) the driver says something like cannot find a …

Thanks for the help, i'll probably hold off then or get the 233MMX since I want the best 3d games performance. the 200mmx I have now has a non removable intel heatsink but is low profile and barely clears the 3.5 drive bay so if I do upgrade i'll have to carefully pick a cpu cooler that would fit …

Hi, I built a win95 gaming rig with a M559 motherboard with that infamous UTRON chipset that is susposed to be slow, it has a 200mmx chip in it right now, sega rally 2 is playable but I tried 4x4 evo on lowest setting and it was pretty bad. Video card is a PCI voodoo 4 4500, I wanted a use a more …

Was wondering if it is okay to mix NMOS and CMOS ram? I have a 286-12 that kept getting memory parity errors, ran check it and it found bad ram in bank 0. I put in some NEC D41256 ram that is NMOS mixed with the existing Hyundai chips and the NEC ram runs 20c hotter. however no more memory errors …

I tried checkit and it found some bad ram doing the continuous test. It made 1 clean pass before showing the failure. I also removed each ram chip and sprayed QD electronics cleaner in the sockets and reaseated them before running the checkit test. below are the attached pics of the RAM, the test …

I appreciate the help! I got DOS 5.0 install and used winimage which created the floppy just fine. however the computer keeps crashing in dos and windows and playing games. keeps saying memory parity interrupt at 0713:018E

Hi, I have a old Suntac chipset 286 12 with only 1mb ram. I really want to run windows 3.0 not 3.1 on it and I installed dos 6.22 then windows 3.0. however after 3.0 installed I get smartdrv error incorrect dos version and when I type win at the prompt it crashes and says DIVIDE overflow. I would …

I thought I would update this thread, I managed to track down a Bios update on intels website and the ReadMe said it fixed problems with certain graphics cards. I haven't had a problem since!

Hi, I have a Intel 815 chipset board D815EE2U with windows 98SE and a Geforce 3, when put into standby it bluescreens, ive tried changing from S1 to S3 sleep modes in bios and changed APM to off and still does the same thing so I disabled standby for now so it wont BSOD. any ideas would be …