This board is slower with more than one SIMM module installed, so I would just get a 32MB FPM module and be done with it. I have the latest BIOS flashed, so i’m not sure if that is the case on older BIOS revisions though.

There should be software bundled with the driver to adjust the centering. You won't have such a util if you're only using Windows own driver. I used a utility with a generic Trident TGUI9940 back in the day with a crappy 15" monitor without digital controls.

The only time I have come across this issue was when I flashed a BIOS onto an EEPROM which was not compatible with the motherboard. Swapping it out for a different chip fixed it. Maybe your EEPROM is dying and it is unable to update.

I have two 90's era Thinkpads. My first Thinkpad is a 760EL with a P120 and 800x600 TFT LCD which I purchased second-hand from work in 1999. We had a contract to clear an accounting company of their old Thinkpads so I got to play with a lot of 486 and Pentium Thinkpads from the 755CX to up to 760LD/ …

I am in danger of eventually spending "real money" on a big box Amiga at some point. I've been collecting Amigas since 1998, but I never found a cheap big box Amiga back then. The prices then, compared to now would be considered a bargain. I do have multiple A500 and A1200s a few A600s (most of …

You gambled correctly feipoa, I do have TI RAMDAC. Thanks for the upload.

I have been trying to find a BIOS for a Diamond Stealth 64 VRAM PCI greater than V1.01, but it seems V1.01 is the only one available so far. However, I do have a Diamond S3 Trio64 DRAM T PCI with V2.02! I dumped the BIOS with my TL-866 programmer. No idea if it is compatible with the VLB version …

Viglen called them Jac-Up boards. I have a Viglen Genie Executive DX33 with the Jac-up3, but the board died. I saved a text file with the jumper settings for a DT-Tornado2 board from Archive.org a while ago, but I can't find it there again. Viglen Jacup 3 (DT-Tornado2) Motherboard (Viglen Executive …

mpe wrote on 2021-02-20, 21:54: I programmed this random Mr.BIOS I found online which seems to be working better. O495XLC.ROM.zip Thanks, mpe I will try the MR BIOS when I get the chance.

Did your board originally come with an AMI BIOS? Could you dump the MR BIOS? I have this board (with only the 486 PGA socket on board) but it has a weird performance issue when benchmarking DOOM as it would slow down or lock up. I eventually found out it slows down if you don't have a battery …

I was testing out a Siemens-Nixdorf W26361-D850 today, but I thought it was dying on me as I was getting all sorts of issues. (This card was working fine when I was benchmarking it along with all my PCI cards on a Gigabyte GA-586TX3 board.) I plugged it into my newly acquired MSI MS-6119 BX2 and …

Thermalwrong wrote on 2020-04-24, 21:32: Sure 😀 Here's the BIOS file for it Awesome, thanks again! 😀 I'm going to see if it works with this M1487/9 board as it has an AMI winbios which I am not a fan of...

Thermalwrong wrote on 2019-08-03, 00:42: The board in that picture (which I also have) seems to be a clone of the BEK P405 motherboard: https://www.instagram.com/p/BjsYiyqgp4y/ Could you make a BIOS dump of the BEK P405 motherboard? Can't find anything online about the P405 or this M1487/9 rev. B1 …