3 non working 775 mb

Posted on 2020-11-28, 03:03

by

by Nemo1985

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

I've recently received 3 mb 775, all of them are non working, all of them turns on but the cpu doesn't get warm, all of them when turned on with a debug card give the 0000 code. The socket pins seem fine fine, one of the asrock has bulging caps, the other seems in good shape. I've tried to swap the …

---

Re: asus p5x58d-e incompatible with Radeon 7950?

Posted on 2020-10-16, 11:20

by

by Nemo1985

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Any other guess, please?

---

Re: asus p5x58d-e incompatible with Radeon 7950?

Posted on 2020-10-13, 17:58

by

by Nemo1985

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Yes the system is oc, but the pci express bus is locked at 100 or 101 mhz, also as posted before, I tried to load the default setting, so undone the overclock but it didn't help.

---

Re: asus p5x58d-e incompatible with Radeon 7950?

Posted on 2020-10-13, 17:42

by

by Nemo1985

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Yes I do, with added and updated microcodes since I use a Xeon cpu, I also tried to load the bios default setting but again it didn't help.

---

asus p5x58d-e incompatible with Radeon 7950?

Posted on 2020-10-13, 17:06

by

by Nemo1985

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Hello, I know it's not so vintage but I have a problem with this rig. I bought an AMD RADEON HD 7950 HIS IceQ Turbo 3gb to improve the video performance, power consumption and being able to run the newer games which were not working properly on the gtx 480. The system worked without issues with the …

---

Re: What modern activity did you get up to today?

Posted on 2020-10-07, 18:40

by

by Nemo1985

in Milliways

in Milliways

Hello people, I recently received this video card because I wanted to change the gtx 480 from my x59 rig (X5675 at 4ghz, 12gb ddr3 and Asus P6X58D-E (REV. 1.00), 550watt psu), the problem is that as soon the videocard switch in 3dmode the screen gets a bit of corruption and then turns off. I thought …

---

Re: Looking for DFI K6XV3+/66 hires pictures

Posted on 2020-09-26, 10:58

by

by Nemo1985

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

modbus wrote on 2020-09-26, 09:11: Here you go: Thank you, hopefully this will help to solve my issue!

---

Re: Looking for DFI K6XV3+/66 hires pictures

Posted on 2020-09-25, 18:21

by

by Nemo1985

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Doornkaat wrote on 2020-09-25, 13:46: Best I can do, sorry. At least the tag ram chip is legible. In case you can't make it out post Vogons' compression it should be SB61H1024AS-10. This is useful for sure, now I just need to get the other picture, thank you again! 😀

---

Re: Looking for DFI K6XV3+/66 hires pictures

Posted on 2020-09-25, 12:17

by

by Nemo1985

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Thank you for the picture, unlucky I need the empty pad, I really hope someone will be willing to take a picture.

---

Re: SSD with winxp and ide adapter

Posted on 2020-09-24, 11:34

by

by Nemo1985

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Ok, I've tried Gigabyte GA-8SR533P board with cheap chinese adapter and I've got similar results. Around 80-90 mb/s read speed on InnoDisk FiD 2.5 SATA10000 . But sometimes I've got spikes up to 108 mb/s in some tests. So either SIS 962L aren't very fond of such adapters or IDE performance is …

---

Looking for DFI K6XV3+/66 hires pictures

Posted on 2020-09-24, 11:20

by

by Nemo1985

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Hello, I need your help, I'm looking for an hi res picture of the cache empty in particular what is done to pin 40 and pin 52, as bonus I would also need a picture of the tag ram chip. I'm asking for this because I'm trying to upgrade another ss7 motherboard from 1mb cache to 2 mb cache. Thanks in …

---

Re: SSD with winxp and ide adapter

Posted on 2020-09-13, 19:16

by

by Nemo1985

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

I've tested another sis mb, it is a MSI MS-6719 (MEDION) which use as NB the Sis 651 and as SB the Sis 962, i've been able to install windows xp in a ssd but guess what? The result are sloppy as before: Filename SSDInst.png File size 43.4 KiB Views 1375 views

---

Re: SSD with winxp and ide adapter

Posted on 2020-09-12, 20:33

by

by Nemo1985

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

You are probably right, those are the results with another cheap ssd: ssd2.png Same ssd connected with usb3\sata sabrent adapter to my main rig: ssd2b.png I find it curious that every sata device I connect give a tops the result at around 90 mb\s. Wd velociraptor: wdrap.png Again it tops at around …

---

Re: SSD with winxp and ide adapter

Posted on 2020-09-12, 13:28

by

by Nemo1985

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

I wouldn't jump to conclusion yet. Perhaps SSD is just that horrible at linear read/writes. Looks like Patriot low-end SSDs are quite bad performers for such capacity (no cache, bad NAND?). Sis 962L is just a rebrand of 961 962L was major upgrade, supporting USB 2.0 and Firewire. What about the …

---

Re: SSD with winxp and ide adapter

Posted on 2020-09-12, 09:26

by

by Nemo1985

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

The driver adviced were the same as the one installed, I anyway took the chance to install them again, things aren't changed: hdd.png ssd.png I can confirm that udma mode was enabled and it is still so, I really suspect that the sis ide controller just can't keep up, probably the Sis 962L is just a …

---

Re: S3 AGP Cards (and possibly others) Too Bright

Posted on 2020-09-11, 20:26

by

by Nemo1985

in Marvin \ Video

in Marvin \ Video

Sorry for the bump once again, unlucky wbc doesn't seem to be active in this forum, I'm trying to fix the brightness bug on my virge GX, I'd like to correct the bug in the bios, from what I could understand, there is a value "3F" that should be changed to "1F", but despite my tryings I can't find …

---

Re: SSD with winxp and ide adapter

Posted on 2020-09-10, 22:04

by

by Nemo1985

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Thank you for the link darry, I will try those drivers and report back. I do not think the cpu would be the bottleneck, it is the Pentium 4 3.06GHz Hyper Threading (disabled because the mb doesn't really support it), the most powerful I was able to install. During the windows xp boot the moving …

---

Re: SSD with winxp and ide adapter

Posted on 2020-09-10, 11:20

by

by Nemo1985

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

It is integrated into the southbridge I suppose, it is an ata133, but probably it's an ata100 rebranded from SIS? The bios says both are in ata133 mode

---

Re: SSD with winxp and ide adapter

Posted on 2020-09-10, 10:32

by

by Nemo1985

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

I will try another ssd but honestly I really think it is a no go. I tried to find a SinLoon pata-sata converter but apparently it's not sold on european amazon, my chinese adapter also transfer the smart values of the ssd. Yesterday I also tried to benchmark the hdd and the sdd, it seems that the …

---

Re: SSD with winxp and ide adapter

Posted on 2020-09-09, 22:35

by

by Nemo1985

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

I've tried the second adapter (again bought from China) and it works better, windows sees the partition but when I try to install windows xp it randomly fail to copy files to the hard drive, I tried to use gparted live to clone the partition, fix the mbr but when windows boots says there are …

---