Re: With the announcement that Microsoft has purchased Bethesda...

Posted on 2020-09-21, 15:01

by

by Vaudane

in Milliways

in Milliways

they have nothing to do with apogee/ Interceptor 3drealms I stand partially corrected. Bethesda own Id sofware which has several Apogee titles in it, however Apogee itself seems to be 3D realms, which has purchased various ID software IPs over the years. Either way, with the potential legal limbo …

---

With the announcement that Microsoft has purchased Bethesda...

Posted on 2020-09-21, 13:57

by

by Vaudane

in Milliways

in Milliways

And by extension, ID software/3D realms, anyone who wants it should make dumps of their legacy software they have here: https://legacy.3drealms.com/downloads.html Just in case M$ decide that they don't want to be bothered with that anymore.

---

Re: Bought these (retro) hardware today

Posted on 2020-09-15, 15:08

by

by Vaudane

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Today the PSU for my pentium III system arrived. I originally ordered an Aopen 300W psu, but it got lost in the post. The seller sent a replacement FSP unit, the FSP300-60PNA. Is this any good? It feels fairly solid but I've only ever heard FSP are crap in a can. AOpen used to order their ATX PSUs …

---

Re: Bought these (retro) hardware today

Posted on 2020-09-15, 14:53

by

by Vaudane

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Today the PSU for my pentium III system arrived. I originally ordered an Aopen 300W psu, but it got lost in the post. The seller sent a replacement FSP unit, the FSP300-60PNA. Is this any good? It feels fairly solid but I've only ever heard FSP are crap in a can.

---

Re: Compaq Deskpro 386S boot loop

Posted on 2020-09-11, 12:35

by

by Vaudane

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Okay so I've popped the memory and graphics card out and ran it with dip switches set to default (ie only on-board 1MB of memory and on-board graphics). Still have the same issue. It's been sitting off, but plugged in and thus I'm inclined to think it's a power supply issue. Will recap the PSU when …

---

Compaq Deskpro 386S boot loop

Posted on 2020-09-11, 11:21

by

by Vaudane

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

This is something I've never seen before. Turned it on just to boot up and re-energise everything for maintenance, and its stuck on a boot loop. It keeps verifying the memory then restarting. "7168 kB OK" Has the memory gone faulty? Is it something else?

---

Re: "I'm ready for my close-up now" said Ol' Bessie.

Posted on 2020-09-09, 00:29

by

by Vaudane

in Marvin \ System Specs

in Marvin \ System Specs

The memory: 20180803_001444r.jpg On top of the whopping 1 MB on board, we have this additional board - a Kingston KTC-1000s which supplies an additional 1 MB RAM and if documentation on the internet is anything to go by, it never existed at all. The pins are for additional memory modules (of which …

---

Re: Softpaq diagnostic setup disk for 386/25e wanted.

Posted on 2020-09-08, 14:33

by

by Vaudane

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

I was lucky that I kept the disk when I had LTE 386s/20 (bought new in 1993! Was for college and worth having it for a grand purchase.) Works great, found out the Kingston KTC-1000E 1MB 32 bit expansion card itself is defective. Even that booted with diagnostic disc and detected correct size (eg …

---

Re: Softpaq diagnostic setup disk for 386/25e wanted.

Posted on 2020-09-08, 13:50

by

by Vaudane

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

I was lucky that I kept the disk when I had LTE 386s/20 (bought new in 1993! Was for college and worth having it for a grand purchase.) Works great, found out the Kingston KTC-1000E 1MB 32 bit expansion card itself is defective. Even that booted with diagnostic disc and detected correct size (eg …

---

Bug, V0.1

Posted on 2020-09-07, 22:24

by

by Vaudane

in Marvin \ System Specs

in Marvin \ System Specs

My "Y2K birthday build", which I have decided to name "Bug" after ... well... I'm sure know, has finally begun! And with this, I present version 0.1. bug01.jpg So far, it's in a temporary case I had lying around from an old inherited PC. Does the job but I'm on the lookout for a Coolermaster ATCS …

---

Re: Softpaq diagnostic setup disk for 386/25e wanted.

Posted on 2020-09-07, 17:53

by

by Vaudane

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Maybe try this from the HP ftp site - DIAGNOSTICS diskette(s) contain SETUP Version 8.00 DP256, INSPECT Version 8.00 DP256 and TEST Version 8.00 DP256 for Discontinued Products with at least 256k memory. For 720K (3.5 inch disk) ftp://ftp3.hp.com/pub/softpaq/sp0000-0500/sp0308.txt ftp://ftp3.hp.com …

---

Re: Recovery disc: Compaq deskpro DP2000

Posted on 2020-09-07, 17:52

by

by Vaudane

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

HP maintain an index of most of their old software. You can find it here: ftp://ftp.hp.com/pub/softpaq/ As for that individual system, I don't know what one you need.

---

Re: How do YOU mount your CF2IDE card?

Posted on 2020-09-04, 22:25

by

by Vaudane

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

If you want it in a hard drive mounting location in an old case, just use any 3.5" to 2.5" SSD converter tray and use some velcro to stick it to that. (or better, use standoffs to mount it.. requires a drill, 2 m3 standoff risers, and 4 m3 screws) This is the best solution I've seen out them all …

---

Re: How do YOU mount your CF2IDE card?

Posted on 2020-09-04, 14:23

by

by Vaudane

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

as all your front drive bays are spoken for and you don't want them sticking out the back... You could get the I/O mounted bracket style and mount that to the HDD bay with cable ties or whatever? Although as you have to open the case anyway, I'd prefer the ones that mount directly to the …

---

Re: Any hope for this damaged 3dfx Voodoo 2 (Creative CT6670 8MB)

Posted on 2020-08-31, 10:06

by

by Vaudane

in Marvin \ Video

in Marvin \ Video

Couple of things strike me from the damage you've detailed. The smd caps having pulled off is a strange one. Says to be either something has hit the board, or the board has been bent at some point. The fix isn't easy, nor guaranteed to be long lasting. First of all, you may have to recap all the …

---

Re: How do YOU mount your CF2IDE card?

Posted on 2020-08-30, 02:08

by

by Vaudane

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

I don't have experience of CF-IDE yet, but surely a connector with pins, as on a motherboard, is the male, and the female has the holes the male slots into? I'll soon be looking for an adapter I can slot into a FDD bay, so I can easily swap cards for different OS and other needs. It'll be easier …

---

Re: How do YOU mount your CF2IDE card?

Posted on 2020-08-29, 22:31

by

by Vaudane

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Most CF-IDE adapters just screw into a expansion slot and you access it from the back of your PC. Simple as that. I know Startech sells a front bay CFIDE adapter. I had one once and it worked pretty good. Came with a bracket to convert it to a regular ol' rear mounted adapter too. Aye I looked at …

---

How do YOU mount your CF2IDE card?

Posted on 2020-08-29, 22:10

by

by Vaudane

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Taking a few vogoners recommendations for CF2IDE over more period-authentic storage, and trying to buy an adaptor I can't help but notice they're either male IDE connector, and designed to slot straight into the female on the motherboard, or the female IDE connector based ones have two poxy little …

---

Re: Types of capacitors to recap computer stuff (motherboard and PSU)

Posted on 2020-08-28, 17:26

by

by Vaudane

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Another question on this actually since you look like you have the know. I have a motherboard that uses some small value lytics near the CPU, two 25v10u and a 25v22u. Their footprint means they cannot be replaced by polymer, but ceramics exist with that footprint. Is there any reason a ceramic …

---

Re: Types of capacitors to recap computer stuff (motherboard and PSU)

Posted on 2020-08-28, 15:39

by

by Vaudane

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Still no answer here yet some of you said that worked well, please provide the brand and series of these capacitors (especially electrolytic low ESR capacitors)? When it comes to brands it's easy: Nichicon, Rubycon, United Chemi-con (also known as Nippon Chemi-con) or Panasonic. As for specific …

---