I just set up my new SCSI2SD v6 and can’t get it working. First thing I did was flash the firmware from 6.1.4 to 6.2.1, before doing any functional testing. Symptom: When I first fire up scsi2sd-util, the log shows firmware version 6.2.1 and the SD card size in blocks. However, 1 second later it …

Cool, thanks!

Aha - I just found this Teac floppy drive flyer from the year my PC was produced - https://hxc2001.com/download/datasheet/floppy/thirdparty/Teac/FD-235_flyer.pdf It says "Another option: A type in which the power source connector is installed within the interface connector is also available." But it …

Pics of the docking bay and connector for the floppy? It's literally just a 34-pin female floppy connector on a PCB at the back of a drive bay. There apparently is a standard for this sort of thing as "Enhanced 34-Pin Floppy Header", referenced here http://ohlandl.ipv7.net/floppy/Floppy_Pinouts. …

I have an Intel 486 with a "docking" floppy bay that has only a 34-pin connector, and the manual specifies a Teac floppy drive. I read the PDF manuals for the Teac FD-235G & H and they are very unclear as to whether they accept power over 34-pin, which I believe is the same as "media sense"? Anyhow, …

Good suggestion but it made no difference. Literally the only thing that gets installed is the ATI problem report wizard. The installer logs show success on everything.

I'm having a devil of a time getting Radeon drivers to install on Windows XP SP3. The setup completes "successfully" but the driver is not installed afterward, and the Catalyst Control Center is not installed either. If I then manually install the driver from the ATI directory, I get an unsigned …

SB0090

Yes, that's the driver library CD I mentioned. Only works on either ME or XP minimum.

I searched the forum and saw a couple of posts that said "just use the CD from the driver library" but that CD says on startup that it doesn't support the Windows version. Tried a couple of other driver downloads from other sources and they didn't work either, with a similar version complaint. I …

I have a Radeon 9800 Pro that has a screen full of short double vertical lines || overlaying the POST text, each pair about the height of text characters and spaced about 2 characters apart horizontally. It's the same on VGA & DVI. Does that sound like bad RAM, or do you think it's worth trying to …

Is the connector for the PS/2 mouse port there? Maybe you can just solder one in. There is, but the installed AT connector straddles the PS/2 keyboard and PS/2 mouse locations, so I would have to remove it and mount both PS/2 ports. While that isn't out of the question, there could conceivably be …

My Intel Zappa socket 5 motherboard has no PS/2 ports. It was available optionally with PS/2 ports (and the BIOS supports PS/2 ports) but mine has just a single AT keyboard port. I'm currently using a Microsoft dove bar serial mouse but it would be nice to have something optical. My memory is fuzzy …