Jill of the Jungle support Tandy 3 voice?
Posted on 2020-09-12, 03:13
I can’t seem to get 3 voice sound on my Tandy 1000rlx working on Jill of the Jungle, Has anyone gotten this to work? I own all 3 of the games Thanks
Re: The merits of Socket 7 processors - Intel P54C/P55C | AMD K5/K6/K6-2 | Cyrix/IBM 6x86 | IDT Winchip
Posted on 2020-09-12, 02:30
The athlon ddr bus and increased burst lengths are a large part of the performance What’s stranger is How the relatively minor bus differences between the p54c and the Ppro made a sizable performance difference
Re: DTX 486 DX/33
Posted on 2020-09-09, 01:47
Honestly have never seen a DTK 486, we had stacks of 386sx DTKs of various clock speeds at every school and business around here, 286’s were always NCRs
Re: Are MMX chips marked at all to indicate speed?
Posted on 2020-09-08, 21:57
Fake or worn top. All mine have the speed
Re: How to make NEC V20HL run at 16 MHz?
Posted on 2020-09-08, 20:28
matze79 wrote on 2020-09-08, 18:22: Try run some XT Class Cards.. you will find ones that would not even work beyond 4.77Mhz I had an ibm CGa on a turbo XT, just got more screen sparkles in text mode
Re: Fake 486 Processor?
Posted on 2020-09-08, 18:17
Gotta wonder what the point of a fake DX4 is?
Re: How to make NEC V20HL run at 16 MHz?
Posted on 2020-09-08, 18:15
matze79 wrote on 2020-09-08, 18:06: Why not just go 286 ? On my XT ISA Clock = CPU Clock. So no way i can go 16Mhz I’ve ran 16mhz ISA Bus on a 486, trouble is the ide controller and sound cards. An XT is much easier on ISA cards than a 286+ So I expect you Would need to cherry pick cards
Re: How to make NEC V20HL run at 16 MHz?
Posted on 2020-09-08, 18:00
I was thinking more of if you were to upgrade a real 5160 The standard 16 bit ISA slot could work with an 8086, you would just need to either latch or NC the upper 4 address bits. Trouble is 8086 only has a single 16 bit IRQ, rest officially are “8bit”
Re: How to make NEC V20HL run at 16 MHz?
Posted on 2020-09-08, 17:27
does anyone make this kind of cards? Intel made a card to drop in the 8086 in place of the 8088 Considering the bus similarities I’ve often wondered if a dumb upgrade would allow half the bus to sit on the ISA card and the other half go to the main board 256k on the board 256k on the card for 16 …
Re: How to make NEC V20HL run at 16 MHz?
Posted on 2020-09-08, 17:24
It's also a real bummer there are no 8087 options over 10MHz. Nobody ever bothered to make a CMOS version of the 8087. There are rumours that Cyrix designed one, but it sounds like it was never brought to market. I long since wondered why the 80287 wasn’t a drop in replacement to the usually faster …
Re: Gaming headset/chair recommendations
Posted on 2020-09-07, 18:22
SAMs club had vibrating gaming chairs stereo Bluetooth speakers for $90 a while back. That is what I got
Re: Help identifying 286 board with TACT chipset
Posted on 2020-09-07, 15:31
I would try a very slow oscillator like 10mhz I wonder if you have a blown chip, hard to test without a stack of spare 286 systems
Re: Heath 150-307-3 Chips EGA/VGA
Posted on 2020-09-03, 20:11
I wonder if they did this so they could consolidate their monitor line-up and avoid releasing models with expensive multi-sync and dual TTL/analog input capability. May have saved more money then on the monitor then the extra circuitry on the video card cost. And, VGA was right around the corner -- …
Re: Anyone know where to find ATX 20 pin -5v adapters in 2020?
Posted on 2020-09-03, 17:28
As strange as this sounds if you don’t use serial or a modem I have (in some circumstances) just taken a burnt at psu and wired the connectors direct to an atx with it hardwired on and all seemed to work YMMV
Re: Did PC-Chips ever release a high quality motherboard?
Posted on 2020-09-03, 15:50
I wonder if PC Chips ever made video cards or other types of expansion cards . It would have made sense, IMHO . Yes they did My guess is many a generic Hi-xxxxx branded ISA multi-io was made in their fabs alongside better known SIS video cards that came from them as well Also amptron and Elite …
Re: Is anyone excited for the Nvidia 3000 series cards
Posted on 2020-09-02, 21:17
I like how the cards number doesn’t mean anything anymore How many cards have sported 3XXX for example?
Re: Did PC-Chips ever release a high quality motherboard?
Posted on 2020-09-02, 18:56
I have seen at least three PC Chips M520 (Intel 430VX chipset-based) Baby AT motherboards in roadside or thrift-store PCs Meanwhile, there was a particular revision of the PC Chips M571 that a certain Red Hill apparently had good luck with; later on they had received a different revision with …
Re: Planet X3 by 8-Bit Guy nearing completion! New teaser & music
Posted on 2020-08-31, 17:43
Herne Maxi Disk will format a 360kb Fisk to around 400k and it’s fully doscompatible
Re: Enough CPU power for calculating disk space / disk sizes.
Posted on 2020-08-31, 17:39
Besides the free space calculation in dos (that can be disabled) I’m not really sure what you are getting at.
Re: P200mmx @233 - every model?
Posted on 2020-08-26, 12:47
I had a p200mmx that only was stable to 225, 233 it wasn’t stable in Windows YMMV
Page 58 of 78