Re: Is there a PCI-E EAX sound card with Windows 98SE/XP drivers?
Posted on 2019-08-20, 14:05
I know for a fact that the Audigy RX works in windows XP - it uses an emu10k chip you might be able to get it to work in windows 98 with an INF mod.
Re: Using Yamaha the YMF744 under DOS without legacy/ISA addressing
Posted on 2019-07-26, 18:13
Thanks for referring me to these tools my PCIE to PCI Bridge is a different chip from the Pericom Semiconductor PI7C9X111SL PCI\VEN_104C&DEV_8240 It's a XIO2001 Texas Instruments PCI Express-to-PCI Bridge does this matter for config registers?
Re: Is there PCI-E soundcard with working DOS SB driver? Longshot, but..
Posted on 2019-07-22, 13:49
how do i set the ISA Enable bit from within DOS mode?
Re: Is there PCI-E soundcard with working DOS SB driver? Longshot, but..
Posted on 2019-07-22, 07:13
could this help with PCI sound cards in DOS? ISA enable.This bit modifies the response by the bridge to ISA I/O addresses.This applies only to I/O addresses that are enabled by the I/O base and I/O limit registers and are in the first 64 KB of PCI I/O address space (0000 0000h to 0000 FFFFh). If …
Re: Is there PCI-E soundcard with working DOS SB driver? Longshot, but..
Posted on 2019-07-21, 03:58
So, I bought one of these http://eshop.sintech.cn/pcie-express-x1-to-dual-pci-riser-extender-card-usb30-cable-p-977.html with the aim of getting an old YMF744 PCI sound card working on a new system. using RW-Everything I see the config registers. looking at device and vendor ID reported by windows, …
Re: PCI Config Register modification?
Posted on 2019-07-20, 16:02
Thanks very much, using RW-Everything I see the config registers. edit: looking at device and vendor ID reported by windows, it is actually a texas instuments XIO2001 PCI Express-to-PCI Bridge looking at the documentation http://www.ti.com/lit/ds/symlink/xio2001.pdf there is an ISA Enable bit - so I …
PCI Config Register modification?
Posted on 2019-07-20, 11:00
I bought one of these http://eshop.sintech.cn/pcie-express-x1-to-dual-pci-riser-extender-card-usb30-cable-p-977.html with the aim of getting an old YMF744 PCI sound card working on a new system. It has a Pericom chip on it, and there is a tool to change PCI config registers called PCIEdit https:// …
Re: Is there PCI-E soundcard with working DOS SB16 driver? Longshot, but..
Posted on 2017-11-21, 05:45
the CMI8738 cards are the only pci-e cards with DOS drivers that i know of, what kind of testing have you done with PCI-E to PCI adapters?
question regarding PCI-E Express X1 to Dual PCI Riser
Posted on 2017-11-12, 15:29
I have a question regarding PCIe to PCI bridges you can find on ebay, like this one PCI-E Express X1 to Dual PCI Riser https://www.ebay.com.au/itm/PCI-E-Express-X1-to-Dual-PCI-Riser-Extend-Adapter-Card-with-2-6FT-USB-3-0-C3U1-/192306239770?_trksid=p2349526.m4383.l4275.c10 it uses the PI7C9X111SL and …
VIA 1723 sound chip?
Posted on 2017-08-24, 16:29
I found this card on ebay http://www.ebay.com/itm/New-PCI-E-PCI-Express … UowAAOSwf-VWUhy~ how well does this sound chip perform in DOS? is it any good?
Re: GTA1
Posted on 2016-09-23, 06:05
If I'm not mistaken, I think that message is related to 3dfx mode GTA, use the normal GTA24 executable edit: missed the first pic, yeah it's asking for a 3dfx card did you want to run GTA in glide mode?
Re: DOSBox And Physical Floppy Drive Question
Posted on 2016-09-22, 14:31
so this program is meant to format a floppy disk to ensoniq's proprietary format?
Re: increase the max ram use with dosbox?
Posted on 2016-09-12, 15:28
you could try dosbox-x if you want, it can go up to 512mb i think https://github.com/joncampbell123/dosbox-x you'll have to compile it yourself though
compiling - any idea what this means?
Posted on 2016-09-11, 06:14
I'm attempting to compile dosbox statically, for ./configure i used this ./configure --enable-core-inline LDFLAGS="-static -static-libgcc -static-libstdc++ -s" LIBS=" -static" when i run make it results in this (sorry if it is a little long) g++ -DHAVE_CONFIG_H -I. -I.. -I../include -std=gnu++11 -I/ …
Re: compile dosbox staticly on linux?
Posted on 2016-09-06, 16:00
OK thanks for trying, I appreciate it If anyone else is willing to help me with this, I've uploaded the terminal output from my attempted compile here - https://ufile.io/bbe57 i though it'd be too large to post directly on these forums any ideas?
Re: compile dosbox staticly on linux?
Posted on 2016-09-06, 14:06
like this? ALSA_LIBS = /usr/lib/i386-linux-gnu/libasound.a /usr/lib/i386-linux-gnu/libpthread.a LIBS = /usr/lib/i386-linux-gnu/libasound.a /usr/lib/i386-linux-gnu/libpthread.a /usr/lib/i386-linux-gnu/libSDLmain.a /usr/lib/i386-linux-gnu/libSDL.a /usr/lib/i386-linux-gnu/libSDL_net.a /usr/lib/i386- …
Re: compile dosbox staticly on linux?
Posted on 2016-09-06, 11:38
OK, here is what I've tried defaults ALSA_LIBS = -lasound -lm -ldl -lpthread LIBS = -lasound -lm -ldl -lpthread -L/usr/lib/i386-linux-gnu -lSDL -lGL -lpng -lz -lpcap -lSDL_net -lX11 -lfluidsynth SDL_LIBS = -L/usr/lib/i386-linux-gnu -lSDL I changed these to ALSA_LIBS = -L/usr/lib/i386-linux-gnu /usr/ …
compile dosbox staticly on linux?
Posted on 2016-09-05, 16:47
I was wondering if its possible to compile dosbox staticly on linux? as in, all of dosbox's dependencies included in the executable I don't see why it shouldn't be possible, but I don't know how to do it myself If anyone knows how to do this, could you help me do this?
Re: compile dosbox staticly on linux?
Posted on 2016-09-04, 11:30
unfortunately I don't see those options in the configure script
compile dosbox staticly on linux?
Posted on 2016-09-04, 06:36
I was wondering if its possible to compile dosbox staticly on linux? as in, all of dosbox's dependencies included in the executable I don't see why it shouldn't be possible, but I don't know how to do it myself If anyone knows how to do this, could you help me do this?
Page 1 of 9