Hi everyone, i tried the external 4.5V battery block of 3 AAA. And now it's working, the time keeps running when the PC is off. But strange that the onboard battery is not working. Does anyone have an experience of how long the 3 AAA batteries last or how often you have to change them?

I have checked the jumper it is set right 1-2. The BIOS saves everything i set. And it also remembers the time but the time is not running when the computer is off. When i turn it off wait for a while and turn it on again. The time has still the value from the moment when the computer was turned off …

Hello, i have a strange problem with my ASUS VL/I-486SV2GX4 (REV. 2.0) mainboard. I set the time in BIOS and it is running as long as the computer is on. When i turn it off, wait a little bit and turn it on again, the time value is the one when i turned it off. It seems the time is not running when …

Hi everyone, it's running now! The reason was wrong jumper configuration. The jumpers JP1 and JP2 were set to 2-3. I set them to 1-2 and now it's working. I suppose it is the bus speed. I think it was set to 50MHz and now it is set to 33Mhz matching the FSB speed. I updated the RAM to 2MB and now …

Thank you for your advices. I took some close up pictures of the regions you spoke of (unfortunately I only have a phone camera). For me it looks OK, but i don't have much experience with electronic parts. I will also try to clean the edge connector contacts on weekend.

Thank you, seems to be a very rare card, can't find anything about it on google. Unfortunately the card seems to be not functional. When i put it in my Mainboard it beeps 1x long followed by 3 short beeps.

Hello, could someone please identify the card on picture below? It seems to be a TSENG ET4000/w32P but i don't know exactly which model it is. Since there are empty banks for memory, I assume that it has 1 MB RAM. Thanks!

Hello, i just purchased the "Longshine LCS-6941 VLB caching IDE controller". Can you please tell me how did you flashed the BIOS with the newest firmware? I have downloaded the necessary files from the "Longshine" website. I have 3 files "LCS-6941.BIN", "LCS-6941.EVN" and "LCS-6941.ODD". How can i …

I've got it working now. The problem was, the network card was completely new (new old stock from Ebay). That's why it was not initialized at all. I found out that it is a NE2000 clone from AT/LANTIC. After that I finally found the necessary tool to initialize the new network adapter. In this …

I will try to deactivate the secondary IDE channel in BIOS and look if it work with IRQ 15.