L2 Cache on an ISA board?
Posted on 2020-02-27, 18:00
You guys might remember my post from yesterday. Well, I miscounted. My PS/1 2168 has 28 pin DIP sockets, not 32 pin... So are there any boards that would let me put those chips on an ISA board?
Re: 1024k L2 Cache- where can I find it?
Posted on 2020-02-27, 00:15
" 2055—Cache MemoryWarning:Memory cards are sensitive to static discharge. See “HandlingESD-Sensitive Parts” on page 4-47.Cover (2005)Adapter Card(s) (2035) if applicableRiser Card (2045) if applicable.Note: Run the Configuration Utility after adding or removing cache memory.If the system board has …
Re: 1024k L2 Cache- where can I find it?
Posted on 2020-02-26, 23:37
I forgot... can we cuss on here? LoL
Re: 1024k L2 Cache- where can I find it?
Posted on 2020-02-26, 23:35
Look for IS61C1024-15 on eBay. But be prepared to order more than you need as many of these chips will be dead on arrival. Depending on your motherboard you might also need to upgrade 9th tag chip or 10th dirty tag chip. Thanks! Found some. I'm upgrading the living sh* out of an IBM PS/1 which will …
Re: 1024k L2 Cache- where can I find it?
Posted on 2020-02-26, 23:23
mpe wrote on 2020-02-26, 22:40: Ridiculous is 128MB RAM in my Macintosh SE/30 (1989 system). 64MB RAM wasn't that uncommon in 486 days if you were doing stuff like DTP in Aldus Pagemaker or QuarkXPress. How on God's Green Earth did you get that much RAM on an SE/30? Accelerator Card?
Re: 1024k L2 Cache- where can I find it?
Posted on 2020-02-26, 23:21
Look for IS61C1024-15 on eBay. But be prepared to order more than you need as many of these chips will be dead on arrival. Depending on your motherboard you might also need to upgrade 9th tag chip or 10th dirty tag chip. Thanks! Found some. I'm upgrading the living sh* out of an IBM PS/1 which will …
1024k L2 Cache- where can I find it?
Posted on 2020-02-26, 17:36
Hey Guys! I needed to know where I could get l2 cache modules (8 Chips) totaling 1024k? I'm pretty sure the board supports it, But only one way to find out! ; )
Re: New sound card project: AWE64 Legacy
Posted on 2020-02-26, 04:15
Menkau_ra wrote on 2020-02-24, 01:53: This is a sound card that I was looking for many years. Please make it “buy it now”, I am ready to purchase. Like he said, he's working out the kinks. If you've really been waiting all this time, you'll have patience to wait a few more months.
XTIDE Universal BIOS: IBM PS/1 2168?
Posted on 2020-02-24, 22:15
I'm about to restore and/or upgrade the crap out of an IBM PS/1 Consultant Model 2168. The XTIDE card works in my Compaq Presario with a CF card fine, because it natively supports IDE, but the PS/1 uses SCSI and won't recognize it, even if I take out the main hard drive. Any ides? BIOS on the system …
Re: BLASTERBOARD : A new SB 2.0-compatible ISA sound card
Posted on 2020-02-24, 20:51
Too late to preorder?
Re: Compaq Prosignia 3080 / 486DX33
Posted on 2020-02-24, 18:16
Thinking about buying one, it's on my eBay watchlist. Does it have L2 support?
486 Chipsets? Preferably NOS?
Posted on 2020-02-23, 03:37
Does anyone have access to 486 motherboard chipsets? Like a few hundred? I need it for a project. I know it sounds redicoulous, but I need it for $200 USD or less...
Re: Questions about a Compaq Presario 425/433
Posted on 2020-02-23, 02:53
Hi there, I have a very similar model - a Prolinea net1/33s. It is very flexible in terms of CPU - I have tested mine with a 66MHz DX2, 75MHz Overdrive and even a PODP5V83 (yes, I know it's socket 3, but believe me that it works just fine). As long as your CPU is 5V (or can step down from 5V) it …
Re: Covox Sound Master Reverse Engineering / Replica
Posted on 2020-02-22, 21:02
matze79 wrote on 2020-02-22, 17:58: Nitroraptor53 wrote on 2020-02-22, 07:40: I'm probably too late, but where can I get the board or a diagram so I could get my own made on PCBway? not yet released.. i also wanted one but did not happen yet Well if it's still happening: as JonTron would say: …
Re: Questions about a Compaq Presario 425/433
Posted on 2020-02-22, 20:16
I have one with a DX4/75 (Overdrive, no support for normal DX4) and 20MB RAM, also with SCSI CD ROM. Excellent DOS machine, 'bout to upgrade to an Orpheus Soundcard.
Re: Covox Sound Master Reverse Engineering / Replica
Posted on 2020-02-22, 07:40
I'm probably too late, but where can I get the board or a diagram so I could get my own made on PCBway?
Re: Adlib Driver for Sound Blaster SFX?
Posted on 2020-02-21, 18:39
Grzyb wrote on 2020-02-21, 16:34: I'm only aware of such a driver for Windows 3.1 Does it work for Windows 95 or NT 4.0?
Re: Adlib Driver for Sound Blaster SFX?
Posted on 2020-02-21, 18:36
I'm aware of such things and also am about to order a CVX4, but games like DOOM don't support it (neither does Mars3d, or many other games I play...)
Adlib Driver for Sound Blaster SFX?
Posted on 2020-02-21, 16:19
The Sound Blaster had a DMA. The Adlib did not. However, the Adlib can still play PCM sound effects, just like a Sound Blaster, but the CPU has to do all the work. So, is there some kind of driver? I don't know how to code in x86 assembler, and you may be saying "Just get a Sound Blaster!" I want an …
Re: Simmconn AWE64 Adapter
Posted on 2020-02-16, 00:28
maxtherabbit wrote on 2020-02-14, 22:32: Nitroraptor53 wrote on 2020-02-14, 21:41: maxtherabbit wrote on 2020-02-14, 19:53: Yeah after giving Masterpiece a try I think I'm sold Good for you! What game(s) did you try it on? Descent and Duke3D Nice!
Page 10 of 11