CT2600 is not a Vibra16 it is an SB Pro 2.0 model with a Mitsumi interface. These cards do not have an MSEL jumper, the MPU-401 is hard locked to 330h. Also, I don't think the OPL3 port can be changed on ANY Sound Blaster card. Ok, I installed creative drivers and diagnose.exe /s was able to change …

maxtherabbit wrote on 2020-10-20, 14:54: The MPU port on the vibra can be changed, look for a jumper labeled MSEL as previously mentioned Unfortunately, this card doesn't have a jumper for MSEL.

CT2600 is not a Vibra16 it is an SB Pro 2.0 model with a Mitsumi interface. These cards do not have an MSEL jumper, the MPU-401 is hard locked to 330h. Also, I don't think the OPL3 port can be changed on ANY Sound Blaster card. [edit] My bad, it does say CT2800 on the card, not CT2600... But anyway …

Hello. I have non-pnp SB 16 Vibra, CT2600. Is there any way to change the default midi port, which is 330? It doesn't seem to matter what numbers I type into a set blaster line for midi. It is always 330. Also, is it possible to change OPL3 default port 388? Everything else is working, ok!

This is an analog recording of having OPL2 and OPL3 cards on the same pc, it seems to work without conflicts. The other is a remake of adlib and other sb16 with opl3 on it. Tune is one of the Edlib editor demo tunes. https://sid.fi/~grue/Torben_Hansen_Space13_L_opl2_R_opl3.flac There I can hear the …

I have been bit busy but I couldn't resist into peeking some Vibrants stuff, so here is Stardream by Laxity with opl3 https://sid.fi/~grue/laxity_stardream_opl3.flac

Hello, I have connected a logic analyzer to my OPL2 and OPL3 card and recorded title music from 688 Attack Sub. My friend created software to turn these opl recorded signals to wav. Basically I recorded lines connected to the DAC chip. My motivation for this is to solve the real differences between …

matze79 wrote on 2020-06-25, 07:13: Yes just drop me a PM. I'm interested in buying one, but I cannot send PM's due to my status as a new user.

Hello, I got hold on AWE64 Ct4500 but I have a problem with it. It seems that it distorts heavily if the output volume is set more than 80% from the mixer. It acts the same on DOS and WIN 98 setup. I also noticed that I cannot change output volume at all while playing Wolfenstein 3d, somehow volume …