Hi, guys, I have a computer configured like this: Processor: AMD Athlon XP. RAM: 256 MB. Motherboard: Asrock K7S41 GX. Bios: American Megatrend version 3.31a. Bus Interface: PCI (no ISA). HDD Master: 80 GB. Slave HDD: 156 MB. OS: Ms-Dos 6.22 only. No Windows, nothing, just pure MS-Dos. I'd like some …

Hi, thank you for your answer. I will now download the link file and try it. I need com2 to connect an AEA modem, the PK232 Mailbox, which I would like to put back into operation. It was connected in an old pc, the Olivetti M300-05, when I bought it (in the last century...hi) it already had an ISA …

Hello guys, I have a pci card with serial port (PCI-200 LP) that I would like to configure as COM2. On the motherboard (Asrock K7S41GX) there is already a COM1, and the bios recognizes it. The COM2 card is not seen by the bios. My question is this: is need its drivers to be recognized? And if yes, …

Hi everyone, as you have read in my previous posts, I had a lot of trouble getting my Gotek to work. The idea at the beginning of everything was to install Ms-Dos 6.22 with the help of a bootable cd-rom, on a pentium where Ms-Dos 5.0 was already installed, because nowadays working with new floppy …

1474560 / 1024 = 1440 (KiB) 1440 / 1024 = 1, 40625 (MiB) 1474560 / 1000 = 1474,560 (KB) 1474,560 / 1000 = 1, 47456 (MB) Most people (incorrectly) simply shortened 1440 KB to 1,44 MB: 1440 / 1000 = 1,440 MB 🙂 Hi Jo22, Thanks a lot for your clarifications. I see with pleasure that Ham is also among …

Open the image with 7zip and copy the content over into one of the 100 blocks. That worked on my end. Hi Flupke11, thanks for the tip, but unfortunately it doesn't work with me. If I understand correctly, should you put the content extracted from the image file into floppy001? That is, all the 43 …

Hi Riddick48, You don't need to manually *copy* anything. Make sure your USB drive is inserted, then run USB_Floppy_Emulator_1.40i, you'll see at the right side, floppy slots' list like: 000, 001, 002. Start from 000 and right click on it, choose "Write image file" and point your 1st setup image of …

Hi guys, I downloaded the Ipcas - Usb Floppy Emulator 1.40i software from the Phils Comp. Lab website and I must say, I am very frustrated in using this program. I just bought my new Gotek, model SFRC922D to use it on my Pentium PC, but nothing to do. I explain the problem of the program: a) …

Hi everyone, I am new to this forum and I find it very interesting. I purchased a Gotek floppy drive emulator and I want to use it on a Pentium pc with Ms-Dos 5.0 installed. I would now like to install Ms-Dos 6.22, with the help of Gotek, because my original floppies are unfortunately unreadable for …