anthony wrote on 2021-05-28, 19:26: looks like you need to change the slot occupied by the joker card. i dunno what system you have but the bx based system is highly recommended for a pcx2, not something else. Yes I am using it with a 440BX board. I will test with different slots.

mwdmeyer wrote on 2021-05-27, 01:01: I have one coming soon, so I will let you know! How are you finding it otherwise? Great so far! Performance is great. Installation went very smoothly, everything detected without issues.

Anyone else have a Lost Joker 2 card? (Voodoo 3 + PCX2). I am getting BSODs every time I shut down Windows. Also some odd behavior with the PowerVR part where a game will run extremely slow, but then disabling "PowerVR HAL" in settings will fix it and it will use the PowerVR part correctly. Correct, …

Was not able to get it working with any of the drivers on this system: ABIT NF7-S V2.0 Motherboard (nForce 2) Athlon XP 2400+ @ 2GHZ / 266 FSB 1GB Ram Windows 98 SE Sound Blaster Live! 5.1 I suspect this system is too fast. I have a P2 350mhz system I will test on at a later date.

I removed the motherboard from the case and inspected it. No signs of any physical damage that I can see. Pins / traces / caps all look good. No signs of any shorts or metal coming into contact with the motherboard when installed in the case. Ran the machine with minimal hardware and nothing on the …

flupke11 wrote on 2021-05-04, 19:00: It might be a physical issue on the mainboard, perhaps a broken trace or pins causing a short. This will be the next thing I check. I'll make sure nothing is possibly coming in contact with the back of the motherboard causing a short. Inspect the pins / traces.

I have determined that the Primary IDE channel isn't working on this motherboard. Tried 3 different IDE cables with the same result. The CD Rom drives are both not detected when plugged into the primary IDE channel. Currently able to use 1 hard drive and 1 cdrom drive connected to the secondary IDE. …

Ok I tried plugging the 60GB hard drive (Jumpered to 32) into the Secondary IDE channel to which the optical drives were connected. The Auto detect actually reports the correct size now, however it freezes before allowing me to confirm. If I manually configure the drive using the same settings that …

I have tried jumpering the 60GB drive to limit it to 32GB, but it didn't seem to make a difference. The auto detect seems to detect the cylinders, but you have to manually enter the heads and sectors or it will report the drive size as 0MB. Yes, the board detects two optical drives fine . Also tried …

I am attempting to get a Pentium II machine up and running. But I am having difficulty with the hard drives and I am trying to rule out an issue with the motherboard. Motherboard is a MSI MS-6119 v1.1 BX2 (non cpu plug in play version). Latest BIOS is flashed (v2.10). Pentium II 350 MHZ 384 MB Ram …