Thanks for advice. I did it and mobo is working 😀

The description next to the connector says that it's EISA, but maybe it's a Opti Local Bus - it's not a problem for me. Problem is, that the BIOS chip is empty and i need a valid BIOS dump to revive it 😀

Hi, I have a BC3486UL MOBO, with 386 and 486 PGA sockets, 5xISA and 1x EISA slots. Board is in quite good shape, but doesn't boot. i checked a BIOS chip and it's broken or erased - mostly 0x00, some bytes are 0x80. If someone has working BC3486UL board, please share a BIOS dump, read with programmer …

I feel honored :) I think that everyone knows, how sounds the SAM2695 - it sounds good. But not everyone knows, how the EarSpeaker implemented in VS1053 works. Here is link to my soundcloud, where i posted tracks: Doom II "Endgame" and Descent - setup played on a Waveboard Nano VS with different …

Hi All! I have to show off something. Some time ago i asked about a Sound Galaxy Pro 16 II card (MMSN845) and its Waveblaster connector. Since then, i made some tests, experiments, prototypes and finally made such a tiny Waveboard Nano module : IMG_2058.JPG IMG_2059.JPG Same chip as in Dreamblaster …

I considered this module, or dreamblaster s2, but I came to the conclusion that making such a module myself will give me more fun.

Ok, so now i'm waiting for PCBs. When they arrive, i'll assemble the module and try to run it 😀

Hi all! Guys, i have a technical question, maybe someone can answer me: I have a Sound Galaxy Pro 16 II card (MMSN845) and i'm just making a Waveblaster daughterboard with SAM2695 chip. But i have some doubts: Sound Galaxy Pro 16 II card has two headers: one 26pin and second one with 34 pins. Please …

Hi Zoltan! I just checked a BIOS from you. Yes, it works! 😁 I treated this file like a BIN file, programmed the EPROM chip with it and it worked! : D There was no need to do any interleaving during programming, it was enough to just write the EPROM. Thanks once again 😀

Thanks! I'll try this dump asap 😁

Hi Wilczek_h, I saw that in your build there is an Elsa Winner 3000L VGA card. Since I have such a card myself, but without a bios, I would have a huge request to you: could you provide the BIOS batch of this card? For example, ripped using NSSI, or in some programmer? Thanks in advance for reply :)

As far as i know, the card was removed from the working computer. She hung around the shop for a while, and lost her BIOS chip during that time. The card itself, apart from a few abrasions, does not have any damage, so i assume that after replacing the missing chip it should work therefore i am …

Hi all! Guys, i need your help: i have an ELSA Winner 3000-L card, but without BIOS chip. I can program a new chip, but i can't find any BIN/HEX file for this card. Does any of you have such a card and could rip the contents of the BIOS chip? I will be grateful for any help 😀