Search \ VOGONS

Login

Login

Username

Password

2FA token (optional)

Remember me

Hide my online status this session

Lost password
Send activation email

or Create a new account
Create a new account

Common searches

Active topics

Search results

Display options

Re: Asus board went nuts

Posted on 2023-03-07, 06:27

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

That looks ok. Can you cofirm 5V when system is ON for both '1' positions ? Can you measure '2'3'4'5' ('5' is next to '4' and not the jumper) relative to ground (metal shield of the kb conn) in diode mode(continuity) and specify me the values for both cases when you have 'red ' to ground and 'black' …

Re: Asus board went nuts

Posted on 2023-03-07, 04:46

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Again , can you make a focused pic of that area ? That pin of the resistor pack is not shiny like the rest , that might be corrosion , that trace might also be eaten by corrosion . Can't tell that if the pic is out of focus .

Re: Asus board went nuts

Posted on 2023-03-06, 14:25

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Might be the pic , but that trace looks interrupted by corrosion .

Re: Asus board went nuts

Posted on 2023-03-05, 20:45

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Try with the kbpwr in the disable position .

Re: Asus board went nuts

Posted on 2023-03-05, 20:23

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

How are the KBPWR and USBPWR jumpers set up ? Try to put them on the 5v rail if they are set up for 5V SB , the super I/O chip should get power also from the 5V SB rail , maybe you have a PSU with a weak 5VSB rail .

Re: Shuttle PC for Windows 98 and DOS

Posted on 2023-03-03, 20:18

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

None will be very good , but here is a list : https://global.shuttle.com/products/productsDetail?productId=506 https://global.shuttle.com/products/productsSpec?productId=85 Has similar or better performance to 478 P4 but runs cooler (it's a small case) with a pci ESS Solo 1 (TDMA) and a agp single …

Re: Asus P2L97 Mainboard Power Switch not working (but paperclip works)

Posted on 2023-03-03, 17:31

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

From my experience with Asus boards , yes , some have a problem POSTING with a bad CMOS battery but not a no PSU on/no fan spin .

Re: fujitsu icl indiana bios battery

Posted on 2023-03-03, 17:23

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

There are jumpers near the Dallas RTC , but the img is to blurry to be able to read the description .

Re: Asus P2L97 Mainboard Power Switch not working (but paperclip works)

Posted on 2023-03-03, 16:31

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Maybe you have a problem on the 5V SB rail of the board . 'Wake on keyboard is disabled in BIOS and the jumper on the mainboard for the feature is not soldered. It has revision 2.04.' Check if you have 5 volts on both ends of the jumper .

Re: Shuttle PC for Windows 98 and DOS

Posted on 2023-03-03, 15:55

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

None will be very good , but here is a list : https://global.shuttle.com/products/productsDetail?productId=506 https://global.shuttle.com/products/productsSpec?productId=85 Has similar or better performance to 478 P4 but runs cooler (it's a small case) with a pci ESS Solo 1 (TDMA) and a agp single …

Re: Asus P3V4X Motherboard repairs.

Posted on 2023-03-03, 14:49

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Can you check for continuity between ATX 12V (yellow wire) and CE29 ?

Re: Kinda lost building my legacy gaming setups and I need YOUR HELP points finger

Posted on 2023-03-03, 12:14

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

How i did it : DOS/WIN98SE : Athlon XP/KT133 with ISA slot/1GB Sdram/modded FX5200/SSD with ide adapter. XP/WIN7/WIN10 : XEON QC/P43(because i wanted com/lpt/ide/fdd)/8GB ddr2/GTX970/SSD I tried the 775/agp variant and found that with a 5900 ultra you can cover win98 but for XP was not that great …

Re: Biostar P4M800 Pro-M7 Ver. 8.0 - Win98?

Posted on 2023-03-02, 13:15

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

By 'crappy ram' i mean low speed , high latency modules , unstable at their rated specs or little above that , not a particular brand . No , the bios wont do that for you . You have to test that or pay somebody to do it for you . ASUS P5PE-VM has no official core 2 quad support , so technically is …

Re: Biostar P4M800 Pro-M7 Ver. 8.0 - Win98?

Posted on 2023-02-28, 12:26

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

The AsRock board has the Intel 865 chipset which if the board is ok (has dual channel support also) , should be rock solid and outperform the p4m800 . The only main advantage of the via chipset it's the ability to work with the pci ESS sound card in real dos so you can have a decent sound blaster …

Re: Biostar P4M800 Pro-M7 Ver. 8.0 - Win98?

Posted on 2023-02-27, 22:46

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

The AsRock board with E6700 ( Conroe core ) 2.66 Ghz is better . Be careful when you buy the cpu , there is a E6700 ( Wolfdale core ) 3.2 Ghz and that's not supported on the R2 rev of that board .

Re: Biostar P4M800 Pro-M7 Ver. 8.0 - Win98?

Posted on 2023-02-27, 19:56

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

It's not always a matter of mhzs , the technology behind the core is important also . Here you have a comparison between Intel D945 3.4 ghz / 800 fsb / 4 mb chache ( you don't have it on the list but its a higher clocked 925 ) and E2140 1.6 ghz / 800 fsb / 1 mb cache https://www.cpu-world.com/ …

Re: Biostar P4M800 Pro-M7 Ver. 8.0 - Win98?

Posted on 2023-02-27, 09:59

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

It should work just fine and because of the VIA south bridge you can put a ESS Solo 1 ( TDMA mode ) and have some good DOS support and decent sound in Win98 , also the onboard graphics can be used ( it's not great for win98 but has a decent DOS compatibility ) . Because it's missing dual channel …

Re: HD 4650 AGP ripped out resistors

Posted on 2023-02-26, 08:48

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

For that i need a higher resolution pic and better focused , to be able to see to what traces is that resistor connected and where they lead .

Re: HD 4650 AGP ripped out resistors

Posted on 2023-02-25, 19:41

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

R28 seems to be more like 5R1 (5.1 ohms ) .

Re: Nvidiagate: which models are affected?

Posted on 2023-02-24, 23:06

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

NForce 2 chipset can't bumpgate. At all. It's not BGA. Both chips are connected to PCB through wires, like old CPUs in ceramic packaging. While chip external connection is indeed BGA, that's rarely an issue. Well , something is causing these symptoms . Probably a bad soldering job from the factory …

Page 14 of 16

Go to top of page Go to top of page