Hi, after i repaired my Voodoo 1 ( https://www.vogons.org/viewtopic.php?f=63&t=92193&p=1135161#p1135161 ) with the help from you guys, I am again stuck. I bought 2 Voodoo 2 over the years, but non of them work. So I took the better locking one without the obvious missing parts and startet to look at …

Ok, it can run Tomb Raider 2 and 3D Mark 99! So the hardware is ok-ish after the removal of the cap, but the software is ... I will reinstall Windows just to be shure. I did not know that Unreal had problems with that! Thank you for the info.

Not yet. I am using the normal 3dfx driver (Graphics Driver kit Version: 3.01.00) I logged the initialisation with mojo, maybe someone can see something obvious? sst1Init Routines: InitCode $Revision: 8 $ sst1InitMapBoard(): BoardsInSystem = 1 sst1InitMapBoard(): vAddr:0xfc000000 pAddr:0xfc000008 …

Thank you all so far! I found a pin that was loose, but on further inspection it shows, that it is soldered to the pad, but the pad floats on the PCB... But there is connection between this pin and the other side, so it is connected. I resoldered a few pins that seemed suspicious. I then tried mojo …

Hi, I removed the part and it works now better but still not. I now See the RAM in the Driver and Driver Tab will Not Crash randomly. But unreal still complaits and Halflife wont Go further than "loading". Are there any Things that i should Check that are Always broken?

Hi, I am new here. Saw a few videos on YouTube about repairing Voodoo cards and this forum was mentioned a few times. First I want to start with my Voodoo 1. According to the sticker, it is a VoodooMania Card. I bought it on eBay a few years ago, “working”. As you may guess, it is not. Drivers are …