HI! play with this mobo and find that it boot only if battery is present... but it seem there is a problem with acpi; no issues with dos, but any other os that involve acpi cause crash on boot with apm disabled in bios, win98 can run, probably because it not involve acpi but only apm any suggestion …

This is a common problem on most Sound Blaster 16 & AWE32 models. What I've found worked for me, was to disable the high DMA channel (normally channel 5) and to only use the low DMA channel (normally channel 1). It will still play back 16-bit samples but, using the low DMA channel. In Windows, you …

Could you compile a small tool as well that allows to set the bit 'ON' and 'OFF' from plain DOS on the fly? Here are two simple DOS .com programs to either turn the bit on or off, but I haven't tested these. I used NASM to compile these so I haven't tested them on S3 card. These are so simple you …

But I did further tests with controller this time PCI (directly no onboard bios)and everything works normally, so the onboard controller would seem actually disabled I suspect the problem is on the implementation of PCI bridged ISA that introduce some sort of limitation on this mobo.......mah....:) …

I apologize that I start with a post off topic.... I'm playing with an ASUS P3V133 trying to get a 16bit ISA controller to work(CA9342 no BIOS no PNP) the disk attached is detected by the mainboard but cannot be accessed, I would like to understand if there is hope to make it work or if because of …

I apologize that I start with a post off topic.... I'm playing with an ASUS P3V133 trying to get a 16bit ISA controller to work(CA9342 no BIOS no PNP) the disk attached is detected by the mainboard but cannot be accessed, I would like to understand if there is hope to make it work or if because of …

I apologize that I start with a post off topic.... I'm playing with an ASUS P3V133 trying to get a 16bit ISA controller to work(CA9342 no BIOS no PNP) the disk attached is detected by the mainboard but cannot be accessed, I would like to understand if there is hope to make it work or if because of …