I am going to study up on the Ghost program and how to make an image as it's something many people talk about. That should keep me busy for week or two. Will let you no how things turn out then. Thanks again for helping out.

Forgot that the CDROM also connected to the ISA controller card. Don't need the the CDROM for file transfer so disconnected it and now have access to original hard drive C: and Slave drive F: Thank you mkarcher for your help getting me this far. Unfortunately I only have 3.147.776 bytes free on this …

My next thought was to add a second Disk drive and transfer the important files to it. This is where I am at currently. In that case, find out how to configure the second disk to be a "slave drive", and just connect it to the same cable as the first disk. The hard drive cable should have three …

This begs the question: Why do you want to connect a hard drive to a secondary IDE interface, for example on a sound card? Do you want to run three hard drives? Are you afraid of performance degradation when you connect two drives to the primary interface? Its a good question. I always seem to end …

Thank you for all that info, that certainly answers a lot of possible ways to go. I will let you know if I have any success. My system is 486dx2 ISA VLB Dos 6.2 Windows 3.1

Thank you for your quick reply. Looks like ESS1868 Sound card will do the job. Just have to master the " SUBST" command.

Can a Sound Blaster CT1600 Pro 2.0 (Version 7) be used to drive a IDE Hard drive (Drive D:) or is it dedicated just for a CD ROMs. If possible how does one figure it?

First thanks for your help Weedeewee and douglar. I found the problem I originally followed this path https://www.vogons.org/viewtopic.php?p=1086895 First attachment down the page Instructions ------------ Add a line in the CONFIG.SYS : DEVICE=CH375DOS.SYS @260 %0 This was my mistake. I changed it …

Thanks for your question. I put the CH375286.SYS 3,387 byte file in the C:\WINDOWS\SYSTEM directory.

My first post. Been on it 2 days. Hope someone can help. My computer 486DX2 ISA VESA Local Bus Purchased Industrial Control Card ISA to USB Computer Expansion Card on Ebay ISA USB Card.jpg JUMPER POSITION.jpg CONFIG SYS.jpg ERROR IN CONFIG.jpg Tried changing Config.sys to DEVICE=C:\CH375DOS.SYS to …