In most of the cases you can't get actual values of electronic components by measuring them while they're soldered to the PCB. So measuring isn't going to get me anywhere? I ordered a test bench so i can measure voltages easier while running to see if the DAC gets powered at all. Maybe that is a …

I received a non working Diamond Monster 3D II 12MB, it seems to be undamaged aside from what looks to be a fluid stain behind TMU 0. https://i.imgur.com/gorDOqm.jpeg https://i.imgur.com/uT3AyVC.jpeg https://i.imgur.com/2lCVBKN.jpeg I placed the card in a system to check what it does, detect.exe …

The 200 Mhz MMX will overclock to 233 easily. You have to set the jumpers to select it either way, whether you have the specific processor or not. So, you may as well try it and see if it works. I'm already using a 200 Mhz at 233 Mhz as well. Maybe, that's a better solution. But still i wonder why …

I found another section in the documentation that talks about this. I confirmed on the Vout pin that when a processor that is detected as "MMX" is used, the output voltage is set to 2.9V. It should be possible to reduce this further by adding a resistor to the ADJ pin on the regulator, I think. VRM …