Hi all, So i have a motherboard with a dead CMOS. Battery on board is 2 pin Varta 3/60DK There is an external battery connector but no idea what the pin out is, but it is 4 pin connector with all 4 pins present. Motherboard in question is the following: https://www.ebay.co.uk/itm/Opus-PTM-1010-Mini- …

keropi wrote: ^ old versions work, experiment a little and you'll find one. IIRC it was 2xx that still worked on old systems […] Show full quote ^ old versions work, experiment a little and you'll find one. IIRC it was 2xx that still worked on old systems edit: yep, 2.01 Got a link to the 2.01 …

How would i Check RAM on this ? memtest does not work.

Ok so this may not be sound related after all, Just ran Doom with no soundcard and a blank config.sys and autoexec.bat and same issues as it happens.

I had Doom running without sound very briefly before I put the Aztec in there and it ran fine.

Shagittarius wrote: 1. They were running a dos overlay of some sort. It was trendy about that time and every company had their own version of it. All of them caused more problems than they solved. I am running a Drive Overlay, namely Ontrack Disk Manager..

tpowell.ca wrote: What soundcard do you use? and what settings? Are you using a memory manager? Soundcard is a Aztech Multimedia Pro 16 IIB No Im not using anything but the bare minimum in config.sys and autoexec.bat to get Doom to run. Which is basicly just sound setup stuff.

So i have tried every single combination I can think of of DMA/IRQ and PORT and all lead to the same problem happening, at some point Doom is gonna freeze up and/or hard reset the system. Really frustrating.

Hi all, Having an issue whereby Doom is hard resetting the system when I press fire once I am in the game. As soon as i hit Control it hard reboots. Game runs fine in the demo loop in the menu however. System is a 386DX40 w/4MB Ram, Soundcard is a Aztech Multimedia Pro 16 IIB. I'm not sure but I …

Unreal will be slow on that system. Phil gets: 512x384: 26.64 fps 640x480: 25.46 fps 800x600: 23.71 fps on a P233MMX at 233Mhz. You should be getting 27-30 fps at 266Mhz. Test it, if that's about where your benchmark results are, then you're in normal range. Good luck! At 640x480 I'm getting …

Specs are: Pentium 233 MMX@266Mhz 64MB Ram Chaintech 5TTM1 Motherboard Voodoo 2/Matrox Milleninum II

I fixed the issue in the log with UT99, however performance is still really below what I think I should be getting with hardware rendering so despite the log now saying its using Glide I'm not so sure.

What does the log say, first and foremost? First error in Log says: Cant find file for Package " GlideDrv" What version of UT99: original CD, GOG, etc? Check there are no conflicting .dlls in your \system sub-directory. Anything 3dfx*.dll or glide*.dll -- just move them out of that directory …

Update: Its not just UT99, but also Deathtrap Dungeon that does not work. I am not getting the 3dfx logo in any form in any game ether. Even in Forsaken which seems to be using Glide just fine. Tomb Raider(DOS) has the 3dfx logo show however and works. I have tried reinstalling drivers, and have …

Hi all, Hoping someone can help me. I have a Voodoo 2 installed in my system, drivers installed without error and all seems well.. I can play Forsaken,Quake2 etc accelerated just fine however UT99 just falls back to the software renderer no matter what I do. Anyone able to offer some pointers as to …

The game uses Quicktime and not VFW. Its pretty annoying as i have been following the win 3.1 install directions on this forum and the game specific guide video here - http://www.youtube.com/watch?v=6i2owgy_7ko and i still cant get it to work.

Anyone ?

Hi all, Have followed the instuctions on how to install Win 3.1 Including the S3 drivers and SB16 on this forum with no errors, have also installed Quicktime in 3.1 as well seemingly error free(sample video plays fine with audio) However i just cant seem to get Critical Path to run at all, on launch …