Re: CompuAdd 316s

Posted on 2022-08-02, 23:57

by

by i486_inside

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Any chance you have the dip switch settings for the Compuadd 316s? Trying to upgrade to 4mb.. Thanks! To my knowledge there were no dip switch configurations, you'll need a setup floppy for a 386 Phoenix or AMI or whatever type of BIOS this has, it's been years since I've messed with this so I …

---

Re: Building a 386 using PICMG 1.0 PCI/ISA Backplane with i386 SBC

Posted on 2019-01-20, 19:22

by

by i486_inside

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

I built a system around a 386SX ISA SBC a few years ago. JJ-Tech JJ-103 Single Board Computer and Texas Micro Instuments 2001A Chasis

---

LEGEND XXXCD

Posted on 2017-12-09, 01:08

by

by i486_inside

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

I have it stored away right now since I recently moved, I have the computer stored so I don't know the exact mode If I remember right it uses the 520r Socket 4 motherboard with the 430LX chipset. -8MB onboard RAM -Onboard CIrrus GD5434 with 1MB RAM -Aztech Galaxy Nova Sound Card w/ cd interfaces -2x …

---

Re: Power Supply Suggestions

Posted on 2017-09-01, 18:26

by

by i486_inside

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

If you are located in the US, get a bunch of these 350w Seasonic SS-350ET ATX power supplies. ($16 each shipped) http://www.ebay.com/itm/Seasonic-SS-350ET-PSU-130-Watt-Max-Active-PFC-F3-Performance-Power-Supply-Unit/282292578500 Then for the systems that use AT power supplies, get these adapters. …

---

Optiplex 390 Help

Posted on 2017-08-11, 07:48

by

by i486_inside

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

This isn't exactly retro. But I recently picked up a couple of motherboards puled from Dell Optiplex 390 computers because they were only $15 a piece and I have some family members running nearly 8-9 year old core2 and Athlon II x2 systems that could use an upgrade so I found a cheap Xeon E3 1225 …

---

Re: LS120/"SuperDisk" Approved Head Cleaners?

Posted on 2017-08-04, 22:27

by

by i486_inside

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Or, better idea, take it apart and clean it with a q-tip. i'd rather not risk Misaligning anything when putting it back together. What about using a can of something like CRC QD Contact cleaner or MAF sensor cleaner which is pretty much the same thing as contact cleaner it just uses CO2 as a …

---

Re: Computer Chronicles

Posted on 2017-08-03, 04:46

by

by i486_inside

in Milliways

in Milliways

I find that the later episodes without Gary Kildall to be kind of hard to watch because Cheifet seems to rush everything and repeatedly talk over everyone, when Gary was still around he kind of brought a relaxed balance to the show.

---

Re: 386 SX40 build

Posted on 2017-08-01, 08:31

by

by i486_inside

in Marvin \ System Specs

in Marvin \ System Specs

Also, I have a similar situation with RAM on my 386. Yours only reports 3840k (from 4096k), so 256k is missing. Mine (with 6mb) reports 5760k (from 6144k) so 384k is missing. I wonder if these older motherboards reserved it for something? As a result of the original IBM PC only having a 20bit …

---

Re: Identifying older motherboards

Posted on 2017-07-31, 22:59

by

by i486_inside

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Huh...today I learned. I never would have thought upper memory would have been missing from the post screen, but that makes sense.. I guess? It seems to be fairly common, I have a 286 SBC with 1MB of ram installed on it and the bios only shows 640k conventional no extended, and my CompuAdd 316s …

---

Re: Identifying older motherboards

Posted on 2017-07-31, 21:58

by

by i486_inside

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Now I just need to understand why this only see maximum 6mb (minus 384k for some reason) of ram. Even with 8x1mb sticks, or 4x1mb + 4x4mb sticks... it maxes out at 5760k. Should be enough for me anyway. If you are basing that off the post screen,the bios usually only shows the Conventional Memory …

---

Serial Mouse Won't work with sound card installed

Posted on 2017-07-31, 21:49

by

by i486_inside

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

I had reconfigured my ISA passive back plane system to test out a really flakey 486 SBC i bought, when I put my 386SX card back in it the mouse wouldn't work, I did some troubleshooting and found that if I remove my Aztech Galaxy Nova 16 sound card the serial mouse will work fine, There shouldn't be …

---

Re: Your thoughts of sk423?

Posted on 2017-07-31, 06:54

by

by i486_inside

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Jade Falcon wrote: Edit: also anyone know if 423 and 478 heat sink she are crosse compatible in anyway? They are not.

---

Re: The Bungholiomarks thread: Show me your fullsizers!

Posted on 2017-07-31, 03:52

by

by i486_inside

in Marvin \ System Specs

in Marvin \ System Specs

@ i486_inside: I see there are similarities with your single board computer and the card I have, but I wonder why mine has no CMOS battery. It doesn't have any power connectors, but neither does yours; I guess there must have been a powered passive backplate for these boards. I wonder what happens …

---

Re: Best low-profile PCI graphics card?

Posted on 2017-07-30, 21:06

by

by i486_inside

in Marvin \ Video

in Marvin \ Video

What I meant was just about any dirt cheap AGP card from the era is better, something like a cheap geforce 4mx or fx5200 or those dirt cheap firegl t2 cards that should perform similar to a radeon 9600. Most of the low profile cards use a dms-59 connector but a dms-59 to dual vga breakout is only …

---

Re: Best low-profile PCI graphics card?

Posted on 2017-07-30, 11:05

by

by i486_inside

in Marvin \ Video

in Marvin \ Video

The 8400gs is faster than the HD3450 from what I can see online, faster PCI cards like the 9500gt and faster are pointless and are massively bottle necked by the PCI bus. I did a review of the 9500gt PCI about a month ago, https://www.vogons.org/viewtopic.php?f=46&t=54623 , and I found that the card …

---

Re: Did I buy the right RAM?

Posted on 2017-07-30, 06:01

by

by i486_inside

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Given that you have a 286 and it was made by packard bell I would reasonably assume that they are 30 pin simms, because I am not aware of Packard Bell using anything proprietary they typically used cheap off the self parts and 30pin simms installed in pairs of 2 were the most common configuration …

---

Re: The Bungholiomarks thread: Show me your fullsizers!

Posted on 2017-07-30, 03:31

by

by i486_inside

in Marvin \ System Specs

in Marvin \ System Specs

http://i.imgur.com/jyj3QdLl.jpg Waters .. something. I belive this thing is a controller specific to some medical equipment. At least that was what the e-waste container had in it when I snagged this one. Looks like a stand-alone perhaps, I have not been able to identify all those socketed chips …

---

Re: The Bungholiomarks thread: Show me your fullsizers!

Posted on 2017-07-30, 03:26

by

by i486_inside

in Marvin \ System Specs

in Marvin \ System Specs

I don't have the exact model number off the top of my head but it is a Texas Micro(bought out by Radisys around 1998) 286 Single Board Computer.

---

Re: DS12887 drop-in replacement

Posted on 2017-07-29, 19:00

by

by i486_inside

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

I think I thought of a clean solution on how to use a DIP-24 , you could make an alt12(c)(8)87 for dip24 , For my idea you would glue the alt12(c)(8)87 pcb on top of the ds12(c)(8)87 and bend pins 2,3,16, and 20 up and solder them to their respective pads on the alt12(c)(8)87 , pins 2 and 3 would be …

---

Re: Anyone have a source on a Dallas 1587 Realtime Clock/battery?

Posted on 2017-07-28, 02:23

by

by i486_inside

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Actually now that I look at it, there is an auxiliary battery pin on the chip, so you may be able to use that instead of having to hack in to the chip, Actually, is there an external battery header anywhere on the motherboard that interfaces to the Vbaux pin?

---