Celeron 1GHz @ 1235MHz 2,05V 123.5MHz FSB 02m 50.710s PIII 800B @ 988MHz 1,90V 123.5MHz FSB 02m 50.817s PIII 866EB @ 863MHz 1,70V 132.7MHz FSB 02m 58.915s PIII 866EB @ 863MHz 1,70V 132.7MHz FSB 02m 44.863s (installed Intel Chipset driver and enabled DMA on harddrive) PIII 866EB @ 863MHz 1,70V 132. …

Or u could get a bx board and run it at 133mhz,a lot of them offer the option and run without problems. You need to mention the caveat of 90MHz AGP causing problems with most AGP cards, whether those problems are subtle or serious. More often than not this setup does not work flawlessly. Many …

It did work before the upgrade, also tried downgrading but I was refused to do that. Attached photo of post before upgrade. Refused? You mean you try to flash an older BIOS (I read 4SEB2XO.86A.0020.P13 is recommended), and then what exactly? Thank you! Tried the P13 BIOS from Intels website and it …

Tried disabeling the SCSI controller? I dont remember having much problems installing Windows 2000 om my Asus P2B-D.

@Kamerat, I've heard that after the bios has been upgraded, even downgrading it will still give the cpu error you're receiving so unfortunately you may be out of luck sorry. You could always try though because it can't do any harm provided you know what your doing bios wise which I'm guessing you …

Is there any way to downgrade or modify the BIOS on the boards not officially supporting Coppermines? Mine ran fine with Coppermine before upgrading the BIOS, but it didn't recognized it. After upgrade it just halted with a message that the CPU wasn't supported.

Are you shure that your PSU is 100% OK?

Thank you Vetz! :) I think i will choose only hardware released in stores at 1999. I got my 3D Blaster Annihilator Pro for christmas '99, that's a GeForce DDR card. ;) I had to replace my Asus P2L97 with a P3B-F because of this card, the P2L97 had it's own 3,3V regulator that couldn't supply the …