Re: Orpheus II soundcard thread
Posted on 2023-06-16, 12:18
It's working fine for me.
Re: Orpheus II soundcard thread
Posted on 2023-06-11, 13:28
You try and tell us🙂
Re: Orpheus II soundcard thread
Posted on 2023-06-10, 12:52
As told in LGR video, if you use a system with non pnp bios or integrated peripherals , you need to configure hardware manually your IO cards and so on. So any system with pnp bios or with integrated peripherals configurable in bios with ISA slots are advisable for ease of installation, otherwise …
Re: Revised WSS Driver for Impulse Tracker
Posted on 2023-05-31, 08:23
This is working perfect! Thank you!
Re: Orpheus II soundcard thread
Posted on 2023-05-18, 18:56
It doesn't work, drivers are not well coded, I seen the source code of IT. In Orpheus II IW works well 😀
Re: Orpheus II soundcard thread
Posted on 2023-04-16, 14:35
I tried to recreate your issue, I can't right now. Isa bus is a bit noisy. Try to test with a good ATX PSU and see if it gets better. That noise is digital noise from bus. I'm sure about it. All analogue routing is isolated from that. There are no crossing lines between analog and digital, they are …
Re: Orpheus II soundcard thread
Posted on 2023-04-15, 19:59
Try to go to iw mixer in windows and dos, and silence the inputs.
Re: Orpheus II soundcard thread
Posted on 2023-04-15, 16:25
Well I can say that seems to be digital noise from ISA bus. I changed my psu long time ago, when I had that noise. It solved my problem. Also check capacitors on motherboard. Now I went extreme and now I use an isolation transformer for my pc and audio rigs.
Re: Orpheus II soundcard thread
Posted on 2023-03-20, 14:27
Midi software sometimes doesn't behave as it should. Try to reboot. I
Re: Orpheus II soundcard thread
Posted on 2023-03-20, 14:20
Jumping from 2 different environments, may cause issues. Try to send a reset sysex command to pcmidi in. Windows. I'm sure there is no issue.
Re: Orpheus II soundcard thread
Posted on 2023-03-17, 16:00
To initialize GUS part, just run IWINIT.EXE -V9 to see everything. Also, make sure in orpheus.ini you have it set for orpheusII on configuration. Orpheus 2 is not supported by unisound yet, I believe it will be in a near future.
Re: Orpheus II soundcard thread
Posted on 2023-03-15, 01:21
in Windows DOS mode it may be running in protected mode. if you want to run DOS, you should Reboot in DOS mode and run Orphinit and IWINIT with the correct iw.ini. Make sure also that in orpheus.ini you have card set to OrpheusII. Also, for games, you need to run ultramid. I usually run ultramid -c …
Re: Orpheus II soundcard thread
Posted on 2023-03-15, 01:16
you can use any DMA from 0 to 3
Re: Orpheus II soundcard thread
Posted on 2023-03-15, 01:12
D5 is not ok it should be D3 , there is no DMA5 on crystal part. Only 0, 1, 3
Re: Orpheus II soundcard thread
Posted on 2023-03-15, 00:56
KuroHouou wrote on 2023-03-15, 00:00: Only thing is, Windows assigns two DMA's to the GUS device, 5 and 7.. Maybe I disable one?? You should use 2 DMAs High and low DMA you can set to 7 both or 7 and 6 for example.
Re: Orpheus II soundcard thread
Posted on 2023-03-15, 00:52
Hello! SB Bits/Joystick/CDROM are disabled on gus part. If you have trouble go to control panel, devices, then configure Crystal part to 220 I5 D1 and when you install gravis part you will see Things disabled. (See pictures on first post of this thread) Try to set gravis part to 240 I7 D7 H7. Also …
Re: Orpheus II soundcard thread
Posted on 2023-02-09, 15:42
5v 16mb fpm 72pin simm is what I use. Works good.
Re: Orpheus II soundcard thread
Posted on 2023-02-06, 09:08
About ram on board , we thought about that , but we would have to buy dram individually or buy simms and desolder, making the card more complex and more expensive. There was a risk also to get bad ram, and debugging it and fixing would be daunting. So we decided to use a simm socket for 72 pins that …
Re: Orpheus II soundcard thread
Posted on 2023-01-29, 22:22
Hello! You need to install PCMIDI manually. Go to add/remove hardware. Choose it manually. Music Quest then MPU401 compatible. You may need to change Adress and IRQ manually again.
Re: ORPHINIT: New Init Software For The Orpheus Sound Card
Posted on 2023-01-19, 18:06
Hello! Soon Windows9x drivers will be added.
Page 2 of 20