Re: Please tell me this guy is trolling.
Posted on 2015-11-11, 17:37
Re: Compaq cds 524 - upgrade info [help]
Posted on 2015-11-11, 14:02
@gdjacobs Ive tried to put an 8,4g HD but no good, afterwards ive tried to install a 4,3g and that one worked like a charm... but in this case has you mencioned, this era system has a size limit of 8,4g, so even with a overlay software its not possible to install a hd bigger than that? Does your 8. …
Re: Gravis Ultrasound Class Rev 3.74 Missing IC
Posted on 2015-11-11, 13:33
keropi wrote: heh, don't feel that way Evert - we all bought the wrong thing at some point 😁 This isn't a mistake. He bought a GUS _AND_ an adventure.
Re: K6-3 400 vs K6-2+ 500
Posted on 2015-11-11, 13:27
Floating point (single precision) was what SSE registers were for. The integer elements you mention were just minor modifications of MMX.
Re: AMD cpu for Win98SE rig
Posted on 2015-11-11, 13:09
DOS (7.1) should be fine. I've run MPXPLAY on FreeDOS using a KT400, AXP 1700+ setup. Native sound support. Dos games will be more problematic, of course, mostly due to PCI only audio.
Re: Compaq cds 524 - upgrade info [help]
Posted on 2015-11-11, 13:06
BTW you guys where can i find overlay software to overcome hd size limits? which ones do you recommend? how do they work? I tend to look upon drive overlay software with disdain. With that in mind, what in particular were you wanting to do which would require overlay software. My admittedly brief …
Re: got my ps/2 backplate... still no mouse working? PLEASE HELP!
Posted on 2015-11-11, 12:15
chrisNova777: What province are you in? Are you at all close to a Princess Auto? Digital multimeter, $9.99 on sale. http://www.princessauto.com/en/detail/digital-multimeter/A-p8347676e Should be fine for low voltage stuff. Do _not_ plug any cheap multimeter into mains wiring. Also, you can make a …
Re: AMD cpu for Win98SE rig
Posted on 2015-11-11, 11:59
For Socket A, Palomino or Thoroughbred are period correct as well and much less of a room heater than the old T-Bird cpus.
Re: Please tell me this guy is trolling.
Posted on 2015-11-11, 11:48
A V1 or V2 would need a 2D driver which translates all 2D (GDI or whatever) draw calls through Glide. Not sure if such a beast exists. This would be similar to how R5xx and newer ATi cards use the 3D engine for both 3D and 2D draw calls. The differences are 1) VESA support and 2) proper vendor …
Re: got my ps/2 backplate... still no mouse working? PLEASE HELP!
Posted on 2015-11-11, 04:57
I can't imagine a hardware fault that would result in a mouse responding to the Hayes command set. 🤣
Re: Another day.. Another fried part from Ebay...
Posted on 2015-11-11, 04:51
Someone already did... http://www.retrocomputing.net/parts/c/creative/ct4500/ct4500_1.gif The 78M05 is a standard 5V linear regulator. You just need one in DPAK format from any of the usual suspects. I'm guessing Creative didn't stray too far from the reference circuits. The Fairchild datasheet …
Re: Please tell me this guy is trolling.
Posted on 2015-11-11, 04:26
A V1 or V2 would need a 2D driver which translates all 2D (GDI or whatever) draw calls through Glide. Not sure if such a beast exists. This would be similar to how R5xx and newer ATi cards use the 3D engine for both 3D and 2D draw calls. The differences are 1) VESA support and 2) proper vendor …
Re: Question for the hardware guys...
Posted on 2015-11-11, 04:20
Nowadays, it's hard to find those wood burning kits. An uncontrolled iron would make a great substitute.
Re: got my ps/2 backplate... still no mouse working? PLEASE HELP!
Posted on 2015-11-11, 04:16
It'll show as a modem only as long as the program does no testing. Pretty good chance it's just a bad default setting.
Re: got my ps/2 backplate... still no mouse working? PLEASE HELP!
Posted on 2015-11-11, 04:12
I recommend getting a basic soldering iron as you seem to be interested in vintage computers and therefore electronics in general. It's useful for many different types of repair on vintage gear, some of the most common (cap and battery replacement) being easily apparent on visual inspection. If …
Re: Question for the hardware guys...
Posted on 2015-11-11, 03:40
Soldering is a useful skill for anyone into retro computing. Not essential, but useful.
Re: I need a list of good PC multiplayer games that do not require the internets
Posted on 2015-11-11, 03:10
Re: Tandy TL/2
Posted on 2015-11-11, 03:08
I usually use either a 270 or 330 ohm resistor at TTL signal levels (5V). If you want to know how bright (max continuous current) your led can operate, double check your data sheet. Max current handling varies most particularly depending on the led packaging (therefore heat dissipation).
Re: Is there a list of games composed on MT-32 (OLD vs new), or a list of which synths were used for which DOS games?
Posted on 2015-11-09, 12:08
Right you are. I was confused by Dagger being issued with GM on initial release, unlike Longbow which was patched to support GM (quite successfully, IMO). I haven't played Dagger, but I hear the music played over GM is fantastic.
Re: Favourite / best FPS?
Posted on 2015-11-07, 23:22
Page 370 of 371