VOGONS

Common searches


Search results

Display options

Re: Desoldering help

I have re-capped several boards the last years. After starting re-capping of the most critical capacitors on selected boards, during that time i have not bought a desolder gun, i have used this multitool (dremel) to drill out the remaining solder at small holes. With this approach you have to take …

Re: CD-in Audio - where to find for my SB Pro clone

UPDATE : Now it's working !!! ESS688 + audio CD in + wavetable Problem solved. :-) Only the IDE cd-rom interface, i was not succesful to run, but as I've two IDE ports on the VLB controller card i don't need the IDE cd-rom interface. At least the Audio -CD in and the wavetable general midi is …

Re: CD-in Audio - where to find for my SB Pro clone

Well, this was my assumption also, that JP 6 ,7 and 8 are for IRQ.... to the CDROM. But there is also jumper JP, which is pictured at the cards back: JP3: IRQ 14 - Primary IRQ 15 - secondary Well, i don't care about the CDROM interface on this soundcard, cause i have two IDE port on a controller …

Re: CD-in Audio - where to find for my SB Pro clone

From my point of view, the only possibility that it's muted , it can be through jumpers. As you can see the 1st link in this thread, i had shown some pictures of this card some years ago. The problem is that there are no all jumpers decribed on the backside of this card. From my point of view, these …

Re: CD-in Audio - where to find for my SB Pro clone

I have seen that i've another system with IDE cdrom and audio cable with mitsumi connector. With this soundcard (opti 929 chipset), the CD- audio signal is working. I've installed now this "working" cable to the 486 system with the soundcard i've showed at the beginning of this thread, an ISA …

Re: CD-in Audio - where to find for my SB Pro clone

Thanks for your info. I have bought this cable. But i have still problems that i don't hear any sound from a playing audio CD. Either when it's connected to the Mitsumi CD-In header or the Panasonic header. About your website you've linked. I am a little confused to be honest. The cable I've bought, …

CD-in Audio - where to find for my SB Pro clone

I have this sound card: SC1616 It`s the same model like the sb pro clone from vogons member 'Intel486dx33' edison gold 16 I have tested this card, FM sound is working, the IDE port has been regierered also by the tool HWinfo610. But now i want to play some audio streams, from CD-ROM directly. I have …

Re: ( 1995 ) 486DX4-100 budget build.

You have shown here several sound cards for this built. Which one(s) you actually want to use? About your Edison 16 Gold: Have you already tested it - all the functions? I had an old post here, several years ago : KWX-SC1616 It's actually the same card. There are 4 CDROM interfaces : Sony, Mitsumi, …

Page 2 of 27