Re: Need help finding data/fax modem driver for windows 3.1

Posted on 2017-12-19, 01:26

by

by MichaelWeaser

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Gotcha, and that does ring a bell as I used to stay on top of early PC tech like a hawk and recall something like that about the ESS modems. If you end up going another route, definitely go the route of a serial port as PCMCIA devices had their own set of challenges with card services and then …

---

Re: Need help finding data/fax modem driver for windows 3.1

Posted on 2017-12-18, 22:59

by

by MichaelWeaser

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

From what I remember about these 'soft modems' (besides the fact that they were horrible), is that many of them didn't work in DOS--only Windows. I know either my brother's winbook xp5 or my original winbook may have had the same softmodem, but both systems haven't been powered on in many years and …

---

Re: Need help finding data/fax modem driver for windows 3.1

Posted on 2017-12-18, 15:25

by

by MichaelWeaser

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

I somehow think I have this in a bunch of stuff I haven't touched in decades. :( Hopefully someone else has these more accessible for you. a few days ago I found a web archive of the ESS website, it only has the drivers for the card for windows 9x , and windows NT based, up to windows xp , But I …

---

Re: Need help finding data/fax modem driver for windows 3.1

Posted on 2017-12-16, 22:34

by

by MichaelWeaser

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

I somehow think I have this in a bunch of stuff I haven't touched in decades. :( Hopefully someone else has these more accessible for you. a few days ago I found a web archive of the ESS website, it only has the drivers for the card for windows 9x , and windows NT based, up to windows xp , But I …

---

Need help finding data/fax modem driver for windows 3.1

Posted on 2017-12-13, 02:29

by

by MichaelWeaser

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Maybe someone on here can help me with a driver problem, I am looking for a windows 3.1 driver for a laptop that originally would have came with windows 95 or 98. I am looking for a ESS ES336/ES56 data/fax driver for windows 3.1. It says in the manual for the machine it is windows 3.1 compatible, so …

---

Re: Looking for cardbus/Pcmcia driver for DOS and windows 3.1

Posted on 2017-10-26, 20:19

by

by MichaelWeaser

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

lolo799 wrote: All you need for a CF adapter is this: http://www.tssc.de/site/products/enablers/ata … ab/default.aspx I also want to use network cards, so I will have to figure out how to configure cardware 7.0

---

Re: Fix my DOS crash and reboot

Posted on 2017-10-26, 17:38

by

by MichaelWeaser

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

I fixed the issue, I had to change the mode of Power.exe to APM mode, Which is Power.exe STD , without that setting it was running power.exe in ADV mode which saves power by detecting what applications or drivers are idle , and it doesn't need APM, Because the laptop is APM compatible I was thinking …

---

Re: Fix my DOS crash and reboot

Posted on 2017-10-25, 23:58

by

by MichaelWeaser

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

lazibayer wrote: Do you need emm386? You can try qemm if you need emm. Used QEMM386.sys, it does the same thing , and yes I need a emm386 and power.exe , EMM386 is needed for a PCMCIA driver, and then the PCMCIA drivers yells at me if power.exe isn't enabled.

---

Re: Looking for cardbus/Pcmcia driver for DOS and windows 3.1

Posted on 2017-10-25, 16:43

by

by MichaelWeaser

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

I remember that issue... With all folders, Cardsoft, CardView, etc, it is barely over 1.44MB. I had to delete one or two help/readme files that are not needed to get some free space, and then copied the "SS365SL.EXE" file I needed for my adapter into the CardSoft folder. When you have the file …

---

Re: Looking for cardbus/Pcmcia driver for DOS and windows 3.1

Posted on 2017-10-25, 15:00

by

by MichaelWeaser

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

I remember the CardSoft installer only working properly when it is indeed run from the root A:\> dir, otherwise they are not working as they seem to use relative paths... They expect the install.exe to reside in a:\> This is the issue, that installation I have, is actually too big to fit all in a …

---

Re: Looking for cardbus/Pcmcia driver for DOS and windows 3.1

Posted on 2017-10-25, 13:59

by

by MichaelWeaser

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Forget the installer, just copy the files somewhere and add those lines at the end of your config.sys: Device=c:\cardsoft\ss365sl.exe Device=c:\cardsoft\cs.exe And for the sake of testing, comment out everything you don't need to try the drivers, especially emm386, cause it seems that's the source …

---

Re: Fix my DOS crash and reboot

Posted on 2017-10-25, 02:00

by

by MichaelWeaser

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

You can try downloading a memory tester like memtest (they have a DOS version) and see if you have bad memory. Tested the RAM it isn't bad , plus tried another ram stick that I know isn't bad, and it does the same stuff. I was told I need to actually use a utility to check what memory is being used …

---

Re: Looking for cardbus/Pcmcia driver for DOS and windows 3.1

Posted on 2017-10-24, 22:45

by

by MichaelWeaser

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

If it recognizes it as an intel 82365SL chipset, have you tried Cardsoft SS365SL.EXE or SS365LP.EXE? Yes, when I do the DOS installer, it doesn't leave me install anything , The installer recognises nothing and when I try to install , It says it installed something , But it installs nothing . The …

---

Re: Fix my DOS crash and reboot

Posted on 2017-10-24, 21:40

by

by MichaelWeaser

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

He probably needs emm386 more than power.exe. I would either not run power.exe or if you do, run it before emm386 (I don't think it needs that). Or, not run emm386 at all like the poster above me suggested. Actually I have tried running power.exe before emm386.exe and it does the same exact thing , …

---

Re: Looking for cardbus/Pcmcia driver for DOS and windows 3.1

Posted on 2017-10-24, 21:14

by

by MichaelWeaser

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

What does the following software report: http://www.vogons.org/viewtopic.php?f=62&t=30840&p=285316#p285316 Also here's the PhoenixCard Manager 4.02, give it a try, it supports some Ricoh chipsets: ftp://ftp.acer.com.tr/Archiv/notebook/Extensa_355/driver/dos_wfw/pcmcia31.zip I have actually tried …

---

Fix my DOS crash and reboot

Posted on 2017-10-24, 18:47

by

by MichaelWeaser

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

I am having an issue with a cyrix mediagxm laptop, when emm386.exe is loaded it causes power.exe to crash, which causes DOS To restart, the way I figured it out is use F8 and execute config.sys and autoexec.bat line by line , when I do that emm386.exe loads and then when power.exe loads DOS …

---

Re: Looking for cardbus/Pcmcia driver for DOS and windows 3.1

Posted on 2017-10-21, 14:20

by

by MichaelWeaser

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

derSammler wrote: Do you have a second email address perhaps to which I can send it? try sending it to my username, using yahoo mail @yahoo.com , if you have to you could attach it to a private message on here. If you email it, please post a message on here, right after you do it.

---

Re: Looking for cardbus/Pcmcia driver for DOS and windows 3.1

Posted on 2017-10-21, 13:35

by

by MichaelWeaser

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

oeuvre wrote: Could be in your spam... and yeah, don't install the flash/ATA drivers but for me I still ended up with around 510-525kb conventional Yes, I checked everything , its not there, and Yes I kept on checking my email, and even the spam folder .

---

Re: Looking for cardbus/Pcmcia driver for DOS and windows 3.1

Posted on 2017-10-21, 01:50

by

by MichaelWeaser

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

derSammler wrote: Yes, I did yesterday. I checked my email, didn't get it somehow , my email is simply my user name, and than @gmail.com, If its not working, maybe send the file to me through a private message on here???

---

Re: Looking for cardbus/Pcmcia driver for DOS and windows 3.1

Posted on 2017-10-20, 21:08

by

by MichaelWeaser

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Depends on the cards you want to use. At least the Phoenix Card Manager will only install what you need. E.g. you don't need to load support for Flash filesystem support if all you want to use is a modem or network card. Of course, if you load everything, you can say goodbye to 200 kb. Did you send …

---