Theres any way to install DOS 6.22 from CD-rom?

Thanks for the help. My solder skills are bad. I need some pratice.

I Just want use ISA or VLB controller because the serial head port uses diffrent pins orders. Its possible use just only disabling the motherboard COM port in the bios? Also using serial PCi card?

Cyclone 3d, the Chipset driver is only avaliable for win98.

I'm not sure you can run 98SE on that motherboard. Does it have drivers for 98SE? In the Gygabyte site, feature the onboard audio drive compatible with win 98 and Intel INF installation (chipiset). Also in the BIOs section feature a bios to fix some Keyboard and mouse problems on WinME. Also the …

I just get a a 775 mobo ( Ga 8i865gme) with a celeron (2.8). I have some doubts: 1- I have a sb live 4760 ( the gold plated one). This soundcard will work the sb 16 mode in DOS games on win 98SE? 2-Can i load custom soundfont for MIDI for later DOS games? 3- Who the best way to make a dual 98SE/XP? …

Thanks for the help!

Some questions: The jumpers 31(CLKIN an CPUKLIN) and jump 37 ( wait states) are Turbo function related? Jumpers 6,7 and 8 are just to clock selection. So, using the d 2 66mhz and setting to 20/25 mhz or even 40/50mhz is safe or will give problems? I just setted for 33mhz. Today installed the sb16 …

i find this board, but dont have any model indetification, besides the bios and Toshiba sticker chip. The cpu is a AMD 386 DX.

At least a basic one to test the sb32.

Hi guys 🤣 I just have a SB32 CT3670 and two 1mb 30 pin ram. 2mb is enough to load good soundfonts? I plan to use on my PII 450 + win98SE. i wll just use for later DOS games and non-speed issue games.

Yes is running. I dont instaled audio card or mouse yet. Just tested Commander Keen1. Runs fine.

Hi guys I just got a AWE32 3670 ( use AWE 64 chips) and i have 2 x 1MB 30-pin ram to put. Will be enough to load some basic soundfonts? I am aware about the lack of true OPL3 and i plan to use it on my p2 450 with win98SE. I want just use for later and non speed sensitive DOS games.

Hi guys :blush: . I just build a 486 dx2 66 mhz machine using this motherboard: http://www.elhvb.com/webhq/models/486vlb3/sis471b.htm sis471b.jpg The motherboard already came with four 30-pin (1MB). I just changed for 72 pin FPM, but refuse to boot ( just beeps). Already cleaned the slots, the …