Re: Voodoo-3 and WIn95b requirements ?
Posted on 2021-09-04, 10:34
I have installed a Voodoo-3 on Win98se but never on Win95b. That's why I ask. What Win95b updates would I need ?
Re: Voodoo-3 and WIn95b requirements ?
Posted on 2021-09-04, 08:31
I know I need the Voodoo 3 drivers but what DirectX version do I need ? And do I need any other updates and patches ? The internet is full of suggestions but which ones are correct ?
Re: Ultimate Dual Pentium II@333mhz
Posted on 2021-09-04, 08:27
PC Hoarder Patrol wrote on 2021-09-04, 08:14: If that's 04h, that would be the POST routine code for 'Get CPU Type', which would be 5 beeps (1-1-2-1) - is that how it sounds to you? The diagnostics card seems to be 4Ch tho, for 'Shadow video BIOS ROM'??? Yes, I think that’s it. What do I have to do …
Voodoo-3 and WIn95b requirements ?
Posted on 2021-09-04, 08:23
What drivers and software patches and updates do I need in order to get this Voodoo-3 card working well With Win95b ? Computer specs: Motherboard - Intel 430tx motherboard Memory - 64mb SDRAM ( DIMM PC-133 ) Motherboard cache - 512kb cache CPU - Pentium MMX 233 Video card - VooDoo-3, Evil King , …
Re: Ultimate Dual Pentium II@333mhz
Posted on 2021-09-04, 02:04
Okay, I moved the jumper J7E1 back to 1-2 pins and the CPU is recognized correctly now. But it boots a black screen with the numbers “04” And it beeps 5 times and halts. Keyboard still does not work. I have a diagnostic card hooked up too.
Re: Ultimate Dual Pentium II@333mhz
Posted on 2021-09-04, 01:07
Caluser2000 wrote on 2021-09-04, 00:51: How many ps/2 keyboards did you try? 2 know good PS/2 keyboards.
Re: Ultimate Dual Pentium II@333mhz
Posted on 2021-09-04, 00:37
The keyboard does not appear to be working at all. The keylock and num lock dont work either. USB keyboard does not work either. Do all the keyboard LED's flash shortly after powering on ? If not maybe they are not getting the +5v. Even when KB controllers fail the AT and PS2 KB will usually (but …
Re: Ultimate Dual Pentium II@333mhz
Posted on 2021-09-03, 22:10
I tried other single CPU’s of different speeds but the bios still sees them as 133mhz ? Dual CPU’s appear to be working but at 133mhz too. The keyboard does not appear to be working at all. The keylock and num lock dont work either. USB keyboard does not work either. Was there ever such a thing as a …
Re: Ultimate Dual Pentium II@333mhz
Posted on 2021-09-03, 21:48
Something else I noticed is its booting with CPU speed of 133mhz when the CPU is a 266mhz ? Let me try another CPU.
Re: Ultimate Dual Pentium II@333mhz
Posted on 2021-09-03, 21:37
Okay, I put in the NEW PSU and its booting now. It boots into bios on its own. But the PS/2 keyboard does not work. I tried both PS/2 ports. I get a “keyboard error” on boot up. I think it was error code 0211 The manual reads you can use either port. https://www.elhvb.com/mobokive/archive/intel/ …
Re: Ultimate Dual Pentium II@333mhz
Posted on 2021-09-03, 21:36
Well at least the new psu has it booting (of sorts) What happens if you now set jumper J7E1 to pins 2-3 (forces the system into configuration mode) - does the keyboard work now? Jumper J7E1 - https://www.vogons.org/download/file.php?id=118245&mode=view Yeah, setting that jumper has it booting into …
Re: Ultimate Dual Pentium II@333mhz
Posted on 2021-09-03, 20:21
Okay, I put in the NEW PSU and its booting now. It boots into bios on its own. But the PS/2 keyboard does not work. I tried both PS/2 ports. I get a “keyboard error” on boot up. I think it was error code 0211 The manual reads you can use either port. https://www.elhvb.com/mobokive/archive/intel/ …
Re: Is it worth it for me to get a Voodoo card?
Posted on 2021-09-03, 10:25
I don’t know why I never purchased a “Voodoo 5” back when they where cheap. But I was mainly into dual CRT display setups using the Matrox G400/G450 and 20” Sony CRT’s Also the TNT and GeForce video cards had better graphics than the Voodoo. That what kept me away form the Voodoo cards is that there …
Re: Ultimate Dual Pentium II@333mhz
Posted on 2021-09-03, 09:57
OT. I have a R440LX which has a 24-pin power connector which is the same physically as a modern ATX connector, but which is wired differently. Presumably anyone who plugged a modern PSU into it would blow up the board or the PSU or both. Intel why yuo do this???? Yes, as some as I get this NOS PSU …
Re: Ultimate Packard Bell P3 / Voodoo3
Posted on 2021-09-03, 09:26
I would put a BIG Copper heatsink with fan on that 3DFX chip. They run very HOT. These Voodoo chips are soldered to the PCB with solder balls in a process called “Surface mount”. So using the 3DFX Chip, solder balls and baking the PCB in a special oven they where able to solder these Chips to the …
Re: Intel shuttle socket 7 motherboard ?
Posted on 2021-09-02, 17:46
Hey guys, Do you think this motherboard is fast enough to work well with a Voodoo-3 PCI ? The card has 16mb of memory. The motherboard will have 64mb SDRAM PC-133 DIMM and 512kb. motherboard cache. Running Win95b.
Re: The World's Fastest 486
Posted on 2021-09-02, 17:39
Face palm you guys, plugged an EDO stick into the LS486E and now I’m hitting 19.4, same as the 8433UUD under stable settings. I know it’s not news to anyone but here are the speedsys results between FPM and EDO on the LS486. Can you post a photo of your motherboard jumper setting ? Mine is running …
Re: DK440LX with Voodoo-3 Evil King ?
Posted on 2021-09-02, 16:59
Oerg866 wrote on 2021-09-02, 11:33: This is not an AGP card :p Oh yeah, Hey I can use this card in my Win95 build then.
Re: Ultimate Dual Pentium II@333mhz.
Posted on 2021-09-02, 03:29
BitWrangler wrote on 2021-09-02, 02:22: Since you're pulling your VX apart try the RAM that worked in that in this. I was unable to get the SDRAM to work in the 430vx motherboard thats why I am going to swap it out. But I don’t this the 440lx motherboard problem is RAM. Let me try another PSU and …
DK440LX with Voodoo-3 Evil King ?
Posted on 2021-09-02, 03:05
I am still working on my DK440LX with Dual Pentium II @ 333mhz. But I also have a Voodoo-3 AGP card that I fixed a while back. I purchased two of these a few years back. Non working with artifacts. It turn out I just had to reflow the RAM chip solder joints and they work fine now. Should I use one …
Page 46 of 242