Re: Windows 95 *actual* minimum system requirements?
Posted on 2019-03-09, 06:14
I used Windows 95 on a Dtk 386sx25 w/4mb as a business backup. Things ran slowly but reliabily the few times I had to use the system
Re: Showing Off CRT Monitor I Got Today
Posted on 2019-03-09, 04:14
1280x1024 .26DP Says good for amiga, sun and sgi
Re: Showing Off CRT Monitor I Got Today
Posted on 2019-03-09, 01:44
I’ve been looking for an old Gateway dimension monitor to mod as a vintage gaming crt for a while Too bad, back in the day my school junked a dozen of them at that point I saw no value in them 🙁
Re: Intel PD440FX with PII 350?
Posted on 2019-03-09, 01:30
This brings back the memories of the seemingly infinite time between the pii233 release and the pii300 of the original generation. Further the rarity of the systems at release A 300 66mhz fsb should work fine as it’s in the same family As should a 333 despite it being the next generation
Re: Subtle differences between Cyrix and IBM 6x86s
Posted on 2019-03-07, 02:05
I had a Cyrix 233mhz 75x2.5 for many years At one point I upgraded to a Ss7 sys598 and ran the bus 2x95mhz gave a nice speed boost Now I find out many motherboards had undocumented and stable 120mhz and 133mgz FSB settings If the old Cyrix chips can do 1x would be interesting to run an old pr200 on …
Re: Do 430HX motherboards generally work with 128 MB modules?
Posted on 2019-03-03, 23:06
Chipset is irrelevant the board would list a voltage setting if it supports it I doubt it and I have run 3.3 volt memory at 5 Volts for years. http://www.tsukumo.co.jp/20thanniversary/comparison/160304c_160701_ASUS_manual.pdf There is no such thing as a 3.3 volt simm and your board only works with …
Re: Do 430HX motherboards generally work with 128 MB modules?
Posted on 2019-03-03, 14:38
3.3 volt edo dimms are rare sorta like 5 volt sdram So I doubt it’s an issue
Re: 286 board only recognizes 512kb RAM
Posted on 2019-03-03, 03:56
I had an older 286 that required you to run a bios program when you changed the memory quantity, You had to manually enter the amount of base and extended memory save and exit. If memory serves the Simms could only be used as extended memory which meant weird things since it only had 512kb of base …
Re: Do 430HX motherboards generally work with 128 MB modules?
Posted on 2019-03-03, 03:12
Well, the 430HX chipset supports up to 512 MB if I'm not mistaken. Has anyone seen a motherboard containing a 430HX chipset which contained eight SIMM sockets? For what it’s worth Mine had 6 72 pin Simms , I’ve also owned an HX with 5v Dimm sockets (for edo dimms only, I was a dumb teen at the time …
Re: Gracefully bringing retro machines into the future: 5G wireless and the new Internet
Posted on 2019-03-03, 00:19
http://www.vcfed.org/forum/showthread.php?680 … ened&highlight=
Re: Do 430HX motherboards generally work with 128 MB modules?
Posted on 2019-03-02, 23:26
64mb+ simms were extraordinarily rare and $1000+ a stick when these systems were released many times they had support before the Simms were being sold meaning it can be hit or miss Usually 128mb Simms aren’t fully standard, so if your board supports odd memory types you might be good but no way to …
Re: 286 16MHz, 4GB RAM
Posted on 2019-03-01, 03:07
GigAHerZ wrote: Intel486dx33 wrote: RAM was expensive back in 1993. 1mb. Of ram use to costs $100 […] Show full quote GigAHerZ wrote: 4GB of RAM!? 😜 RAM was expensive back in 1993. 1mb. Of ram use to costs $100 I don’t know the manufacture date of that 286 but I am sure ram was expensive back then. …
Re: 286 16MHz, 4MB RAM
Posted on 2019-02-27, 12:45
rasz_pl wrote: was there any software able to utilize all 4MB of ram on 286? other than maybe Win3.1? Various cad and drawing packages Lotus could as well Then there was ibms weird cash register POS stuff that could use the full 1gb virtual memory space
Re: the world how I would have wanted it: the evolution of 486 CPUs
Posted on 2019-02-27, 03:55
Socket 370 should have never existed, celeron should have been socket 8 and the socket improved over time like super 7. Also 486 class should have gotten the Pentium fpu and bus speed increases.
Re: Commander Blood - Not Enough Conventional Memory
Posted on 2019-02-24, 19:17
Back in the day I had a lot of “not enough conventional memory” issues on Win95+dos games My solution initially was to have a 16 bit partition and a dos 6.22 boot disk
Re: games that are better on a Macintosh
Posted on 2019-02-24, 18:08
A couple of points: This thread was not about games unique to the Mac, but games that have both a Mac and a PC version with the Mac one being better. None of the games mentioned so far seem to be from the CGA beeper era. So I think we are talking about slightly different topics. ;) Not really Many …
Re: Commander Blood - Not Enough Conventional Memory
Posted on 2019-02-24, 17:27
Try running memaker
Re: games that are better on a Macintosh
Posted on 2019-02-24, 05:29
I think this list should be changed to What games were better on B&W Mac versus PC. You want to see an empty list? Ah come on the first Macintosh game was that diver game that taught you how to use the new fangled mouse and a few other concepts. My school had it on floppy for the typing lab. It had …
Re: XT IDE to AT IDE upgrade
Posted on 2019-02-22, 14:12
I’ve often wondered if you just ran the wires from the AT ide ribbon cable to the matched XT IDE wires on the motherboard leaving the upper 8 bits NC if you would just get a half capacity ide drive?
Re: games that are better on a Macintosh
Posted on 2019-02-22, 13:55
I think this list should be changed to What games were better on B&W Mac versus PC. Most everyone I knew that owned a Mac back in the day of dos gaming Had either A B&W Mac or an Apple Ii of some sort. I didn’t know anyone with a color Mac until the late 90’s and I don’t think that’s a unique thing …
Page 76 of 77