VOGONS

Common searches


Search results

Display options

Re: Voodoo 3 3000 - 5ns ram?

Some V3 3000 wil OC to 200 MHz, even those with 6 or 5.5ns RAM. Hovewer with 5ns the chance is quite high. :happy: I second this. I had a voodoo3 years back with 5ms ram that overclocked well over 200mhz, Keep in mind I had a mild volt mod on the card. Without the volt mod it maxed out around …

Voodoo 3 3000 - 5ns ram - Upgraded Cooling!

I'm putting together a slot 1 machine and last night I ordered a Voodoo 3 3000 on ebay. Looking at the ram chips it seems like it might be 5ns ram. Does such a thing exist? I've never seen any better than 5.5 in person. Attached is a pic from the auction where you can see the ram pretty good.

Re: Pentium 3 Katmai System

With the CPU, Awe64 and the Banshee's great VESA compatibility this will make a great pure dos SVGA games rig. Dos glide titles may be a bit tricky to get working in native dos as they expect a voodoo1, but I would worry about that on a game by game basis when your up to that point. Nice! How many …

Re: Pentium 3 Katmai System

768 MB RAM is overkill and also not fitting to the time period. Moreover, Windows 9x does not work correctly with more than 512 MB RAM (there are patches, but why even bother). 128 MB is more than enough for a P3/500. You can also just use a Banshee. You need a CPU with about 1 GHz to fully load a …

Re: Pentium 3 Katmai System

768 MB RAM is overkill and also not fitting to the time period. Moreover, Windows 9x does not work correctly with more than 512 MB RAM (there are patches, but why even bother). 128 MB is more than enough for a P3/500. You can also just use a Banshee. You need a CPU with about 1 GHz to fully load a …

Mendocino Celeron/440BX System

EDIT - This is now a Celeron based build, P3 processors aren't working in this board at all. I skipped over the slot 1 stuff back when it was new, went straight from Socket 7 to Socket 370 so I think this could be a fun little project. Planned Specs: Intel Pentium 3 500mhz Slot 1 "Katmai" version …

Re: Pentium 4 System

More complete test run at stock (vs OP at stock) Aquamark 3 - 38476 3dmark 2000 - 20451 3dmark 2001 - 17476 3dmark 2003 - 5428 3dmark 2005 - 1026 3dmark 2006 - 293 (had to place an extra 1gig ram IN, so I lose dual channel ram) Very good! These are my most up to date benchmark results, using driver …

Re: Geforce FX5900XT - XP Driver Comparison

If you edit the .inf it'll run. The 45.23 driver supports the FX5900 and the FX5900XT uses the same NV35 chip. extract the drivers, open nv4_disp.inf in notepad and add... this line under [Manufacturer] %NVIDIA_NV35.DEV_0332.1% = nv4_NV3x, PCI\VEN_10DE&DEV_0332 and this line under [Strings] NVIDIA_ …

Re: Geforce FX5900XT - XP Driver Comparison

I'd give 45.23 a try. So I downloaded that version and it doesn't support this model, the readme shows FX5800 and FX5800 Ultra as supported. The oldest version that I can find that supports the 5900XT is 56.64, so I'm going to run some benches with that version. I'll add the results to the first …

Re: Geforce FX5900XT - XP Driver Comparison

Half Life 2 will run great as long as you run in the default DirectX 8.1 mode it uses for the FX series. It looks pretty good. I'm not sure what's entirely missing, but you will notice some blockyness in some effects. Far Cry runs pretty well too. I think it uses a special FX rendering path with …

Re: Pentium 4 System

Ponjiayulady wrote: Msi K8T Master2-far7, it can support single 940pin athlon fx or dual 200 series Opteron The MB is very old, it can only support ECC registered DDR RAM, with very strange Intel socket 423/603 cpu cooler (Amd cpu but use Intel spec cooler) Wow that is very strange!

Page 20 of 23