Re: Anyone get a Voodoo 1 to work on ASUS P3B-F or similar 440BX?

Posted on 2019-10-27, 14:18

by

by red-ray

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

May I suggest putting a menu bar across the top of SIV32? I only found the right-click ? Menu by chance. Thank you for checking out Beta-04 and the save files. I added ASUS P3B-F support to SIV a while ago and I now finally know it works :cool:. About 14 years ago I was pondering adding a menu bar, …

---

Re: Anyone get a Voodoo 1 to work on ASUS P3B-F or similar 440BX?

Posted on 2019-10-27, 09:57

by

by red-ray

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Any special BIOS settings to try? Thank you for posting the files and the 3dfx Voodoo1 looks OK, but as for BIOS settings I can't help as I have only used my Voodoo1 to check that SIV reports it OK. SIV was slightly confused by your Riva TNT as it's Chipset ID is 20044001 which is unusual. I have …

---

Re: just 2 Resolutions reported from radeon 9800pro

Posted on 2019-10-27, 00:07

by

by red-ray

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

thrawn235 wrote: Any other ideas ? From display properties/screen resolution if you select Advanced there should be a List All Modes, what does that list? I don't have a 98SE system booted so I can't be precise about what to look at.

---

Re: Anyone get a Voodoo 1 to work on ASUS P3B-F or similar 440BX?

Posted on 2019-10-26, 17:28

by

by red-ray

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Yeah, I did wrong, here's the attachment! Thank you, but I should have been clearer as it's the save files I need to see and only asked for the logs when we though SIV was locking up the system. To generate the save files just run SIV32L.exe with no qualifiers and then do Menu->File->Save Local …

---

Re: Ram with same make/clock speed but different timings and voltage

Posted on 2019-10-26, 16:27

by

by red-ray

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Is that AIDA64? I have an older version of Everest Ultimate here and it doesn't show DDR voltage. It looks like AIDA64/Everest to me and assuming it is then it will only show the actual DIMM voltages when the motherboard reports them. Are they shown on the BIOS monitoring screen? If not then I …

---

Re: just 2 Resolutions reported from radeon 9800pro

Posted on 2019-10-26, 16:13

by

by red-ray

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

thrawn235 wrote: Is there a way to see what resolution the monitor reports as beeing capable of ? My SIV utility has the Menu->Machine->Graphics panel which should do this and on this system I get as below.

---

Re: Anyone get a Voodoo 1 to work on ASUS P3B-F or similar 440BX?

Posted on 2019-10-26, 15:26

by

by red-ray

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

GiSWiG wrote: Here are logs from Windows XP running at 400MHz (4x100) and two sets from Win98 at 400 (4x100) and 266 (4x66). Thank you, but I can't see any attachment, so I guess something went wrong.

---

Re: Ram with same make/clock speed but different timings and voltage

Posted on 2019-10-26, 13:57

by

by red-ray

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

it reads the correct SPD timing values automatically. Thank you for this which confirms what I recall used to happen on my ASUS P5Q PRO Turbo before the DIMMs with the EPP profile failed. As for mixing DIMMs then I expect if will all depend on what the SPD is for them and there will be no general …

---

Re: Ram with same make/clock speed but different timings and voltage

Posted on 2019-10-26, 13:28

by

by red-ray

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

You want me to buy OPs memory, OC it as I wrote in my post and post screenshots ? Because I'm pretty sure every other screenshot I post will just get "shot down" as "using not correct memory". As to how you justify your statements is up to you, all I specified is that I feel you need to justify …

---

Re: Ram with same make/clock speed but different timings and voltage

Posted on 2019-10-26, 12:39

by

by red-ray

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

agent_x007 wrote: PS. What OP needed to know is in my first post in this topic. No, OP needs to provide details of the SPD so a decision can be made based on appropriate data rather than relying on your guesses being correct. I also feel you should do as I did and provide screen shots to justify …

---

Re: Ram with same make/clock speed but different timings and voltage

Posted on 2019-10-26, 12:08

by

by red-ray

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

I used to have an ASUS P5Q PRO Turbo with an Intel chipset and EPP DIMMs I did not setup the timings manually. What do you mean "incorrect" ? 1) You don't remember what you did to set memory up on Your board ? OK, but you can't blame me for not knowing it (I'm not in Your head). Again EPP is a …

---

Re: Ram with same make/clock speed but different timings and voltage

Posted on 2019-10-26, 09:47

by

by red-ray

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Background : EPP is nVidia's version of XMP (before XMP was a thing). QVL list doesn't mean you have "XMP" or "EPP" option in BIOS to check for memory to work. It only shows what memory was tested with motherboard. So, two questions : 1) Do you have a "EPP Enable" option in BIOS or did you have to …

---

Re: Ram with same make/clock speed but different timings and voltage

Posted on 2019-10-26, 09:18

by

by red-ray

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Since Intel boards don't support EPP [nVidia thing only], you don't have to worry about wrong voltage : Board will always use 1,8V for Auto setting from jEDEC profile (unless BIOS is bugged). 2,1V have to be set manually in BIOS by You (and the same goes for timings). This statement is incorrect, I …

---

Re: Ram with same make/clock speed but different timings and voltage

Posted on 2019-10-26, 08:19

by

by red-ray

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

how do i that It depends on which OS the system is running, if it's running Windows NT, 2K, XP or later then you could download the SIV32L.zip that's attached to https://www.vogons.org/viewtopic.php?f=46&t=68756 , extract the files, run SIV32L.exe then press the [ SPD ] button and post a screen …

---

Re: Ram with same make/clock speed but different timings and voltage

Posted on 2019-10-25, 15:36

by

by red-ray

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

The ones that require 2.1v to run at 800 would be inferior chips IMHO even though their CAS is lower because they require higher voltage to attain the 800mhz and CAS4 over 800Mhz and CAS5 of the ones at 1.8v. No, I suspect the extra voltage is just to get the lower timings and the DIMM SPD contains …

---

Re: Anyone get a Voodoo 1 to work on ASUS P3B-F or similar 440BX?

Posted on 2019-10-25, 10:48

by

by red-ray

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

siv32l -dbgini -dbgpci > SIV_DBGOUT.log | more So the freezing is not SIV's fault. Apparently, there was a conflict with the S3 Trio. I took out the S3 and put in the Diamond Viper 550 (Riva TNT). Both SIV and Everest see both the TNT and the Voodoo 1. I half suspected this which is why I specified …

---

Re: Is there anybody left on this forum that still has an AM5x86 that will do 200mhz?

Posted on 2019-10-24, 16:14

by

by red-ray

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

data9791 wrote: CPU-Z that worked with win95/3.1 There is one for Windows 95, but I suspect Windows 3.1 support is unlikely, you could install WIN32s and try it I guess. If you do I would be interested to know if my SIV utility runs.

---

Re: SIV support for 386/486/586 class + Alpha CPUs and 3dfx + S3 + Matrox + old ATI + NVidia GPUs - Help needed with testing

Posted on 2019-10-24, 13:42

by

by red-ray

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Vynix wrote: DIMMs are both reported to be made by Infineon. Thank you for checking out Beta-03 and I am pleased to see that SIV now reports HP OmniBook XE3 GC. It's strange that they are both the same but only one of them reports SPD, I wonder why 😕

---

Re: Anyone get a Voodoo 1 to work on ASUS P3B-F or similar 440BX?

Posted on 2019-10-24, 11:59

by

by red-ray

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Ran Siv32 but it freezes PC. Have P2 running at 133 with 32MB RAM. Will try later after bumping that up but no time now. Sorry about this and I hope all was OK once you rebooted. SIV should run OK on a P2 @ 133MHz with 32MB, but more memory may help. It ran OK this morning on a Dual Intel Pentium ( …

---

Re: Anyone get a Voodoo 1 to work on ASUS P3B-F or similar 440BX?

Posted on 2019-10-24, 09:03

by

by red-ray

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Does the Voodoo 1 show up on the PCI Bus at all? There are many programs you could use to check with one being my SIV utility [PCI Bus] <- SIV64X - System Information Viewer V5.43 Beta-04 RK3::ray Bus-Numb-Fun IRQ Vendor-Dev-Sub_OEM-Rev Class (255) Vendor and Device Description [0 - 00 - 0] 8086- …

---