Hello and thanks! I do get the "happy face". Unfortunately I´ve been having difficulties finding a " RDRAM Terminator Module ", specially at a reasonable price. I´m also a bit confused if the " RDRAM Terminator Module " and the " RDRAM Continuity Module " are actually different devices or if the …

I could search for an old version of Everest which works on Windows98, yes. I believe I´ve tried HWinfo before but didn´t pay attention on its temperature monitoring capabilities Thanks!

"What temperature readings are available in the BIOS?" --> Just CPU temperature "I can't find any old software to monitor CPU & GPU temperature on Windows 9x" --> I downloaded Mprobe1.31 and SpeedFan 1.50, as suggested in that thread. Thanks a lot!

Hello there. I am looking for suggestions on a temperature monitoring software. I recently put together a PII 450mhz based system, it is a passively cooled CPU on a small, thick, micro-atx chassis. So I want to control mainly the CPU temperatures (having an eye on chipset wouldn´t harm either). I´ve …

Subscribed! It seems you also have a PIII + Voodoo 3 machine that is not mentioned among the ones in your initial post.

Yes, "best" driver is not only about performance, but about stability as well. Why not testing 93.71 too? Thank you!

Thank you! Will download those and see what happens

Hello there! I am about to add a MSI GeForce 6600 GT to my Windows XP based system. It is a PC I built back in the day around Atlhon XP 2500+ cpu. Which would you say it is the best driver for that video card, just the latest available or any specific older one? I am not concerned about …

Correct, it was already stated above. I can see a couple at eBay right now, not only scarce but expensive...

Hello kwyjibo again. I managed to buy a couple 800mhz RIMM memory modules and a pair of RDRAM Continuity Modules (just in case). Nevertheless I must confess it is not being easy to find the required "RDRAM Terminator Module". Do you think it could be possible someday you uploaded a picture of your …

Nice setup. I believe that model can also handle Tualatin 1.4ghz CPUs, paired with that GF4 Ti, it would be a very capable system to run anything up until 2003. With your current 1GHz Coppermine CPU it is still capable. Since that GF4 is DirectX 8 on a hardware level, I wouldn´t install anything …

I tend to respect people´s passion for a subject, activity, collecting, etc. If I don´t share the taste for it or even if I dislike it, I´ll reserve my opinion (unless that in what you are engaging in, is harmful to somebody who isn´t aware/doesn´t deserve it, or the collective/nation), I don´t see …

Wow, thank you kwyjibo ! this manual will be most helpful! Which confuses me a bit is the distinction between the " RDRAM Continuity Module " and the " RDRAM Terminator Module " mentioned in the image below. It seems those are two different things/pieces https://i.ibb.co/j3wMSWD/RAM-Config.jpg Ok, …

Thank you very much kwyjibo , pentiumspeed and PC Hoarder Patrol for your feedback!. :happy: You all suspect the issue has to do with RAM configuration. Although I don´t get any beeps (naturally, no beepers/pc speakers present) and the self-test message in the display is ambiguous, I am thinking you …

Hello there! Thank you for replying. You remember correctly. The board comes with 3 RIMM memory slots. RIMM modules have to be installed in pairs, otherwise, if you only install 1 module, you must insert the "continuity module" in one of the slots. Currently, I have installed a 128MB module in the …

Hello everyone! My name´s William and this is my first post. I love retro hardware in general (PC and gaming consoles), but when it comes to PC I have special devotion for 1997-2001 era. :blush: I´ve recently acquired an ASUS P3C-D motherboard, that later found out belongs to a HP Kayak XM-600 …