Re: Voodoo 5 6000 PCI - WinXP Pro 32bit - Asus P6T WS Pro - i7 990x - 3GB DDR1600 - SB0550

Posted on 2023-06-12, 15:32

by

by Jackhead

in Marvin \ System Specs

in Marvin \ System Specs

Ok i can confirm the v6000 works on my mainboard on PCI-X 66MHz. I had to deactivate some PCI-E settings in my Bios. Before that the board get any time "out of range". Had to reset the bios any time before i found the correct settings. But ok now it boots fine into XP. I will do next a clean install …

---

Re: WinXP Pro 32bit - Asus P6T WS Pro - i7 990x - GTX Titan black - 3GB DDR1600 - SB0550 - Voodoo 5 6000 PCI ?..

Posted on 2023-06-12, 09:31

by

by Jackhead

in Marvin \ System Specs

in Marvin \ System Specs

The time is come! Got the 6000 today will test later.. Filename IMG_4457.jpeg File size 150.49 KiB Views 1785 views Filename IMG_4456.jpeg File size 161.82 KiB Views 1785 views

---

Re: ASUS VL/I-486SV2GX4 - 5x86 X5 160MHz - OPL3 CT1600 - ET4000W32P - Midi Love

Posted on 2023-06-04, 20:20

by

by Jackhead

in Marvin \ System Specs

in Marvin \ System Specs

I update my ide controller to a promise eide2300 plus. Really nice one it can handle 32gb. I run a m-sata mlc with it dma @ 12MB/s Filename 0701004F-B750-491C-A520-71B259A985A3.jpeg File size 1.54 MiB Views 929 views

---

System Shock CD Version under DOS 6.22

Posted on 2023-05-27, 14:32

by

by Jackhead

in Marvin \ Software

in Marvin \ Software

I try to get System Shock working on my DOS PC (5x86 64MB Ram), but get problems starting it. Im using the cd version with SVGA and that stuff. As Sound card im using a CT-1600. On install system freeze when i try to set the digital sound. I tryed all options for SB with auto and manual settings. …

---

Re: Retro MIDI/Audio Music Making Machine

Posted on 2023-05-24, 10:52

by

by Jackhead

in Marvin \ System Specs

in Marvin \ System Specs

Can be many things, have you checked in the bios boths IDEs are enabled?

---

SDHxC Floppy Emulator, second drive emulator problems win98

Posted on 2023-05-24, 10:25

by

by Jackhead

in PC Emulation

in PC Emulation

I have a SDHxC Slim Floppy emulator that can emulate 2 floppy drives. I used a non twisted floppy cable and the dip switches 1 and 6 are set to on (for IDA0 and IDB1). When i boot dos both drives are booting and showing up correctly. So far so good. Booting into windows98SE both drives shown up but …

---

Re: Retro MIDI/Audio Music Making Machine

Posted on 2023-05-23, 19:10

by

by Jackhead

in Marvin \ System Specs

in Marvin \ System Specs

Go buy a SIL3114 Sata controller (they cheap on amazon), flash it as descriped here: SIL3114 sata card, need ide firmware. install a ssd and you fine.

---

Re: Early 3D System build - Socket 7 Pentium 233MMX - Asus TX97 XE - Voodoo1 - M3D - G450

Posted on 2023-05-21, 11:20

by

by Jackhead

in Marvin \ System Specs

in Marvin \ System Specs

For now i finished the build. I did a recap of the MB and the Soundcard. Also switched the case. I can confirm that the SIL3114 controller has working driver for windows95. So far anything is working perfect. It was really very smooth installation. Another Asus board i really like. Tested some Tomb …

---

Re: Early 3D System build - Socket 7 Pentium 233MMX - FIC PT-2007 - Voodoo1 - M3D - G450

Posted on 2023-05-19, 10:58

by

by Jackhead

in Marvin \ System Specs

in Marvin \ System Specs

Its a nice option for sure, but the nec chip get hot as creazy. Not sure this is normal. But even with a heatsink you cant touch it for long. The card itself work normal but i add a fan again.. Cant understand retail the board has no cooling. I also will switch the mainboard to a Asus TX97 XE …

---

Re: Voodoo 5500 System - P4 Northwood 3,06GHz - Windows 98SE

Posted on 2023-05-15, 13:12

by

by Jackhead

in Marvin \ System Specs

in Marvin \ System Specs

I got some problems with the controller and decited to go back to Win98SE. For that i switched the Soundcard and the sata controller. Installed with Amigamerlin 2.9 the 5500 (base clock 166) perform better as on win2k. Filename IMG_4370.JPG File size 1.19 MiB Views 874 views Filename IMG_4372.JPG …

---

Early 3D System build - Socket 7 Pentium 233MMX - Asus TX97 XE - Voodoo1 - M3D - G450

Posted on 2023-05-15, 11:16

by

by Jackhead

in Marvin \ System Specs

in Marvin \ System Specs

I had a spare case and Mainboard so i startet another system build. This time i want a setup what is between a pure dos and a 3dfx win98se system. It should be AT/ATX and socket 7 (no ss7). As OS i choose Win95. For the 3d it has a Matrox M3d and a Diamond voodoo 1 card installed. It should run …

---

Re: SIL3114 sata card, need ide firmware.

Posted on 2023-05-15, 10:47

by

by Jackhead

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Very nice controller! I run it with b5403.bin and 1.3.10.0 driver under win98se. Connected an ssd, i had never a faster working/booting Win98se before. And i tryed many adapter and controller. The drive runs with UDMA6 with pentium4 setup. Highly recommented if you normal using the usual ide-sata …

---

Re: What SB for a Dos6.22/win95 233MMX build?

Posted on 2023-05-10, 17:23

by

by Jackhead

in Marvin \ Sound

in Marvin \ Sound

Thanks for the link! i found a CT1750 with dsp 4.05 . For what chip was the empty socket over the dsp again?

---

What SB for a Dos6.22/win95 233MMX build?

Posted on 2023-05-09, 13:05

by

by Jackhead

in Marvin \ Sound

in Marvin \ Sound

Any suggestion what Soundblaster i should choose? I think about a SB16 but what model? I not really want a AWE. But above the Pro 2. Good OPL3, and midi would be nice. And it should be ISA because no more pci slots left 😀.

---

Re: 2x Voodoo in one system?

Posted on 2023-05-09, 12:51

by

by Jackhead

in Marvin \ Video

in Marvin \ Video

max i can run is 1600x1200 FFAAx2 with a v5. Ok thats o good point with system fsb and the v1. Than i put it in a nice sockel 7 with a pentium mmx 233.

---

2x Voodoo in one system?

Posted on 2023-05-09, 11:35

by

by Jackhead

in Marvin \ Video

in Marvin \ Video

I wonder if its possible to pair a voodoo1 with another voodoo, one with 2dchip like the 5500? Why? Because some dos games has special features only the voodoo 1 can do. For example Tomb Raider 1 Shadow. Anyone tryed this before? I was thinking/hopeing that when you start game on dos with an exe for …

---

Re: Datacare DI610, Tekram DC-680T Cached VLB IDE controller

Posted on 2023-05-05, 11:35

by

by Jackhead

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

I see, my bad. i missread that its a thrid port, and the two are only for hdd. Ok thats a killer for my system because i dont have onboard ide.. Well i can use a panasonic on my ct1600, but that drives are stupid expensive..

---

Re: Datacare DI610, Tekram DC-680T Cached VLB IDE controller

Posted on 2023-05-05, 10:44

by

by Jackhead

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Ok i got the new eproms, and some ram (8MB) and installed the Controller. I used a CF(4gb)-IDE Adapter connected to primery and a cd drive to second port. So first start went not to bad. The controller boot from the cf. But i had 3 partitions on that cf. Only C: is there, d and e dont show up. Do i …

---

Re: Datacare DI610, Tekram DC-680T Cached VLB IDE controller

Posted on 2023-05-03, 12:43

by

by Jackhead

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Ok, because im not a pro like you guys on that stuff 😀. I do such things not to often. Used a Batronix Barlino II BX 32P reader. But happy when i can help.

---

Re: Datacare DI610, Tekram DC-680T Cached VLB IDE controller

Posted on 2023-05-03, 10:34

by

by Jackhead

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Got the controller. First at all i remove that Sticker on the board DC 680T 😀. I backuped the 1.40 Bios. The U20 was a 512 rom. The other two are 256. Hope the Dumps are good. Please let me know. Enjoy .. Filename Tekram DC680T Bios 1.40.rar File size 23.32 KiB Downloads 20 downloads Filename IMG_ …

---