Re: Windows NT 4.0 running on real new hardware (Ryzen 3900x)

Posted on 2022-12-02, 13:03

by

by matti157

in Milliways

in Milliways

To install a new PCI device you have to manually specify its bus number. I was able to install is a Realtek 8029 NIC which has a driver where you can manually select the bus. I used HWINFO to find out which is the bus number, selected bus #11 and it worked like a charm... Sound card is still not …

---

Re: Can't boot from a cloned SD card with NT4 SP4 installed

Posted on 2022-11-25, 19:42

by

by matti157

in Windows

in Windows

I am cloning a 2gb SD to a 4GB sd. So a 2gb partition is created and the remaining space is empty. I have tried the tool suggested above but the problem persists But how come Windows NT does not boot into a sector-by-sector copy? I don't understand.

---

Re: Can't boot from a cloned SD card with NT4 SP4 installed

Posted on 2022-11-09, 12:54

by

by matti157

in Windows

in Windows

anyone?

---

Can't boot from a cloned SD card with NT4 SP4 installed

Posted on 2022-11-07, 22:37

by

by matti157

in Windows

in Windows

Hi, I installed Windows NT4 + SP4 on a 2GB SD card. The installation was successful and after booting I installed SP4 Then I removed the SD and via linux's DD command I made an image sudo dd if=/dev/sdd of=nt.img bs=4M status=progress and restored the image to a 4GB SD. sudo dd if=nt.img of=/dev/sdd …

---

Use my modern mechanical keyboard (Corsair K95) on a Socket 7

Posted on 2022-10-17, 20:15

by

by matti157

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Hello, I want to use my modern mechanical keyboard with my old IBM 300GL. Obviously the keyboard only supports USB and my IBM 300GL still has 2 USB ports but I guess in DOS they don't work and you need a PS2 keyboard. Also the variable Windows 95 (or Windows 3.11) comes into play. Is there some …

---

Re: Commander Keen 4 graphical glitches on Windows 95/98

Posted on 2022-10-13, 07:41

by

by matti157

in Windows

in Windows

Gustavo wrote on 2022-10-11, 09:26: Try changing these settings: […] Show full quote Try changing these settings: Thanks! It worked

---

Commander Keen 4 graphical glitches on Windows 95/98

Posted on 2022-10-11, 00:01

by

by matti157

in Windows

in Windows

Hi, I can't play commander keen 4 on my computer if I run the game from Windows 95 or 98 FE. Everything works fine instead if I run it from DOS by restarting Windows in the appropriate mode In this video you can see the problem well: https://youtu.be/YTIU5aJ3zhM PC: -Pentium MMX 233 -64MB -Cirrus …

---

Re: Is my IBM 300GL PC compatible with a Voodoo2?

Posted on 2022-08-01, 21:35

by

by matti157

in Marvin \ Video

in Marvin \ Video

If the Voodoo 1 worked, the Voodoo 2 should also work, I also did some tests with a Chinese Rage XL on it. A Voodoo card is perfect for these computers because the integrated graphics card is already good enough for 2D. I was very sad when the Voodoo 1 died. :( On my 300gl, the hardest part was to …

---

Re: Is my IBM 300GL PC compatible with a Voodoo2?

Posted on 2022-07-28, 09:26

by

by matti157

in Marvin \ Video

in Marvin \ Video

Thank you, I just checked and the voltages are ok I was interested to see if as a PCI specification they are compatible with a Voodoo2 I tried various PCI cards: A first generation quadro, an FX5200 and an ATI Rage XL but only the XL works. I guess because of the old specs and I wanted to see if the …

---

Is my IBM 300GL PC compatible with a Voodoo2?

Posted on 2022-07-28, 08:58

by

by matti157

in Marvin \ Video

in Marvin \ Video

Hello, the pc is a Pentium MMX 233 socket 7. i would like to add a Voodoo2 card The chipset is a Triton-VX These are the PCI specifications instead. I had tried other Voodoo2 cards in the past but they had artifacts (it was not to be ruled out that the cards were broken) PCI Bus The fully …

---

ZyXEL G-170S - WPA2 on Windows 98

Posted on 2022-01-15, 00:26

by

by matti157

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

I bought this PCMCIA card, it is able to connect to WPA2 WiFi networks on older systems: Windows 98SE/ME/2000/XP Maybe someone needs it, I have seen that there are not so many cards to support WPA2 on 98/ME Driver+SW: https://archive.org/details/g-170-s-sw-v-2.0.1 https://archive.org/download/g-170 …

---

Re: Anyone try a Quadro NVS 100 PCI video card?

Posted on 2021-12-24, 15:49

by

by matti157

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

The Serpent Rider wrote on 2021-12-24, 15:45: Practically identical to GeForce 4 MX 440SE. Great! But are the drivers always forceware? I have the doubt about how hardware acceleration works on games

---

Re: Anyone try a Quadro NVS 100 PCI video card?

Posted on 2021-12-24, 15:27

by

by matti157

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

I'd like to replace my outrageous Rage XL 32MB on my pentium MMX 233 I found one of these at a great price, but driver-wise how does it work? Direct3d on Windows 98 is enabled? I knew that quadro's didn't have gaming capabilities.

---

Re: What do you drive?

Posted on 2021-11-20, 01:59

by

by matti157

in Milliways

in Milliways

Filename 190419DE-0964-43DA-B897-F1529A3D4267.jpeg File size 731.24 KiB Views 1420 views 😁

---

Re: Ati Rage XL Question

Posted on 2021-11-19, 23:14

by

by matti157

in Marvin \ Video

in Marvin \ Video

I didn't understand which driver to use on Windows 95. The one in vogonsdrivers that is called "enhanced" does not work.

---

Re: IBM Aptiva 2176-352 build

Posted on 2021-11-19, 15:22

by

by matti157

in Marvin \ System Specs

in Marvin \ System Specs

I recently fixed up an IBM 300GL 6282. The BIOS is very similar to your Aptiva, my guess is they are from the same period. I went from Pentium MMX 166 to Pentium MMX 233. I wanted the BIOS in Italian and to do so I had to reflash, luckily the utilities and the bios can be downloaded from this site …

---

Re: Is my Voodoo2 broken?

Posted on 2021-11-18, 13:54

by

by matti157

in Marvin \ Video

in Marvin \ Video

I found for a few € a voodoo2 of Techworks, 12MB As soon as I mount it, I remove the Creative and check the soldering.

---

Re: Is my Voodoo2 broken?

Posted on 2021-11-12, 22:51

by

by matti157

in Marvin \ Video

in Marvin \ Video

I need to take it apart and do a visual analysis I guess? Anyway is it a hardware failure?

---

Re: Is my Voodoo2 broken?

Posted on 2021-11-12, 21:52

by

by matti157

in Marvin \ Video

in Marvin \ Video

Update: With the reference 3.2.2 3dmark won’t start and show the error in the previous post With the reference 3.3 starts and the result is the same with blank and buggy textures

---

Re: Is my Voodoo2 broken?

Posted on 2021-11-12, 21:24

by

by matti157

in Marvin \ Video

in Marvin \ Video

I tried the latest reference driver, but 3dmark99 refuses to start with these drivers Filename DCFFB7CA-3DD5-460A-8C75-E93CF6A2552A.jpeg File size 1.81 MiB Views 862 views Attached the mojo output My cpu is a pentium mmx 233 Any ideas?

---