Re: Weird Fujifilm R013-01

Posted on 2023-11-16, 12:43

by

by dormcat

in Marvin \ System Specs

in Marvin \ System Specs

A brief search on Ricoh FB2LF-15 motherboards gave me some outrageous prices when compared with equivalent Socket 370 motherboards. Guess it's because they are needed in specialized devices (e.g. Fujifilm Digital Minilab) and are not meant for general consumers.

---

Re: Failed BIOS update (award) - Dead PC :-(

Posted on 2023-11-16, 12:35

by

by dormcat

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Since your board tries to seek the floppy drive, there's some hope for recovery. I've faced that with a very similar board (mine was a HOT-555A Rev-3.2), I tried to flash a patched BIOS, and wound up in the same boat. I prepared a DOS boot disk with AWDFlash, the patched BIOS and a modified …

---

Re: What retro activity did you get up to today?

Posted on 2023-11-16, 08:26

by

by dormcat

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Recently acquired this Socket 5 motherboard. It had a Dallas clock chip installed which is naturally DOA, and would refuse to boot up past the POST screen. intel Neptune chipset motherboard.jpg I replaced the Dallas chip with a socket. Even after de-soldering all the pins, it needed some hot air …

---

Re: Failed BIOS update (award) - Dead PC :-(

Posted on 2023-11-16, 08:19

by

by dormcat

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

paradigital wrote on 2023-11-15, 19:29: Just buy a TL866-II. The problem is that a new set of TL866II Plus (clamps and adapters included) costs about the same of a high-end retro system, two good workhorse retro systems, or many more "rescued from dumpsters" systems. 😅

---

Re: Failed BIOS update (award) - Dead PC :-(

Posted on 2023-11-15, 18:56

by

by dormcat

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

It might be a bit late now, but be sure to run MemTest86 before any BIOS update. You might have encountered the same problem as I did: I had not one but TWO Gigabyte GA-K8VM800M bricked due to a single strip of faulty DDR SDRAM (I was not aware that faulty RAM could harm BIOS so I kept using it to …

---

Re: Ideas on my first retro build

Posted on 2023-11-15, 12:56

by

by dormcat

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

I want to build a machine that can basically run DOS or WIn 95/98 games (just DOS is fine as well). However, I want to pick certain parts that are hard to find and potentially expensive. The idea is to have a retro PC than I can play on, but I will probably get over it pretty soon. When that time …

---

Re: Bought these (retro) hardware today

Posted on 2023-11-14, 21:11

by

by dormcat

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

This one made me furious. :angry: I'd bought a Matrox M3D via Ebay. Seller tossed it in a thinly padded bubble mailer with no added padding or protection. It appears to have been crushed during transport and arrived shattered in half. There is even damage to pins on the main PowerVR chip which …

---

Re: Decent used digital cameras Proconsumer-high end.

Posted on 2023-11-14, 05:04

by

by dormcat

in Milliways

in Milliways

And yes, I could just read up on a guide to photography, but as I say, I'm not too bothered. I'm just curious as to how far we are from cameras that can capture a 1:1 image of what your eyes are seeing, without needing any camera-adjustments by the user first. What you "see" is actually heavily …

---

Re: Is this card GF 6200 or 6600? An NV43 with "unlockable" pipelines?

Posted on 2023-11-13, 08:17

by

by dormcat

in Marvin \ Video

in Marvin \ Video

Still worth a look with Riva Tuner would be interesting to see if it has anything at all from the 6600 core. Thanks, will give it a try. I think wikipedia has the story ~ https://en.wikipedia.org/wiki/GeForce_6_series#GeForce_6200 ....unfortunately speaking, looks like you've got a revision A2 …

---

Is this card GF 6200 or 6600? An NV43 with "unlockable" pipelines?

Posted on 2023-11-13, 07:23

by

by dormcat

in Marvin \ Video

in Marvin \ Video

Got this hand-me-down N6200GE/TD/128M/A from a friend. Its size, MOLEX power input, BR02 HSI chip (under the rectangular heatsink), all make it very different from a "standard" 6200 card. It even had the exact same PCB (C277 rev. 1.01) of my 7600GS, which was boxed for retail. 6200_front.jpg 6200_ …

---

Re: I recently found this hardware, AKA the Dumpster find thread.

Posted on 2023-11-13, 06:04

by

by dormcat

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

At the usual site of bulk trash drop-off, I noticed two plastic bags among some furniture. There were many CD and DVD inside; most were junks of B movies and CD-R, but I found something nice: XIII and the movie Spartacus , plus an empty multi-disc case that holds 12. XIII_Spartacus.jpg Judging from …

---

Re: Decent used digital cameras Proconsumer-high end.

Posted on 2023-11-13, 05:44

by

by dormcat

in Milliways

in Milliways

The FZ-1000 is bridge cam but costs way too much for a old model from 400 to 600 for a fixed lens camera, does not make sense, even I can find good price on Canon SX60 HS for bit less. Canon SX60 HS is a good bridge camera but is not on par with FZ1000: the sensor (1/2.3", 6.17 x 4.55 mm) is only a …

---

Re: Bought this (Modern) hardware today

Posted on 2023-11-11, 16:17

by

by dormcat

in Milliways

in Milliways

Oh right, so when you compare a gen 3 i7 to an i5 then its not until 8th gen that the i5 can keep up... Interesting metric of comparison to look up. Comparing an aging flagship product with a new(er) midrange or entry-level product is very common practice in reviewing products of any kind, …

---

Re: Bought this (Modern) hardware today

Posted on 2023-11-11, 11:48

by

by dormcat

in Milliways

in Milliways

ElectroSoldier wrote on 2023-11-10, 19:15: Do you need to go to 8th Gen to get a faster base/turbo speed increase? The i7-4790 is 3.6/4GHz I was only comparing it with newer i5 (4th to 7th Gen); of course newer top-of-the-line i7 would be faster.

---

Re: Bought this (Modern) hardware today

Posted on 2023-11-10, 18:17

by

by dormcat

in Milliways

in Milliways

I think the i7-3770K rates higher than the none K model does. Especially on an Asus board than lends itself to overclocking. The K model is certainly much more desirable on the used market than the 3770 is. Yes, I know the 3770K would be more desirable due to overclocking ability -- sellers know …

---

Re: Which IDE CD drive is best suited for reading burned CDs on old PCs?

Posted on 2023-11-10, 06:51

by

by dormcat

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

IMHO a good brand (Plextor, Toshiba, Pioneer) IDE CD-RW (with or without DVD combo function) would be the most compatible with various disc formats. Experiences with DVD-ROM can vary, but most of them can read discs with newer standards. Like aitotat said, older CD-ROM might have problem reading …

---

Re: Bought this (Modern) hardware today

Posted on 2023-11-09, 16:29

by

by dormcat

in Milliways

in Milliways

Bought an Asus H61M-K + Celeron G1620 from e-waste for just NT$600 (US$18.59). Checked the manual online...... wait the MB could accommodate i7-3770, the ultimate CPU for WinXP? Bought one online for NT$830 (US$25.71) with shipping in no time. I've got spare case, PSU, DDR3, GPU, SSD. With these a " …

---

Re: Decent used digital cameras Proconsumer-high end.

Posted on 2023-11-08, 11:37

by

by dormcat

in Milliways

in Milliways

Wanted to buy another used but good digital camera, that does not break the bank, under $300 CDN or so. Full frame model: Canon EOS 5D Mark II APS-C model: Canon EOS 7D Have you included prices of lenses into account? Even the cheapest Canon lens, the 50/1.8, could cost you about CDN$160 new or $80 …

---

Re: 40-Pin Cf Compact Flash Card To 3.5 Ide Converter - PC wont get past Detecting Drives

Posted on 2023-11-08, 11:15

by

by dormcat

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

You mean it's stuck at the drive detection, or it doesn't boot after that? If it's the first and you're tried the CF as a single drive on the IDE channel like Munx suggested above, what's the size of the CF card? I'm thinking it might be more than the BIOS HDD limit. For certain PIIs even a 16GB …

---

Re: Gigabyte GA-5AA revision 1.1, 2.2 and 3.2 differences

Posted on 2023-11-04, 23:16

by

by dormcat

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

just want to know, be really really sure. how are the holes of C40 on the top side. can you get an even closer image , like the third image but closer, looking that pace below the capacitor. because i was never 100% sure if one was connected to the upper big vein I've already asked a skillful …

---