Other than that, is the serial port driven by a 16550A compatible chip or southbridge? It sounds like it is which would be better than the older serial chips the XT and AT series had in the past. Hi. My ports board on V2 has 16C550CQ chip. As for BIOS - here's features list: https://github.com/ …

I came across this and... ooooh, ISA, RAM, EMS, and a NE2000-based Wifi? Maybe we can have a cut-down version for the Book8088, since it already has a CF drive and a USB port, that sockets into the ISA port it has. Hi, It is in progress (Not by me) Can't wait. I'd love to get some UMB's and EMS on …

I came across this and... ooooh, ISA, RAM, EMS, and a NE2000-based Wifi? Maybe we can have a cut-down version for the Book8088, since it already has a CF drive and a USB port, that sockets into the ISA port it has.

Hi. My ports board on V2 has 16C550CQ chip. As for BIOS - here's features list: https://github.com/jinshin/8088_bios/wiki CF - i broke partitioning once, so you might want to save the very first sector. Formatting/transferring system goes fine usually If you ordered Book with VGA - you might want …

Hey folks. I just ordered a Book 8088 V2 VGA and after going through the thread, I'm left with: The BIOS needs to be updated, but that requires a EEPROM programmer. The latest is nop's v1.0.5. You should image the CF drive first. The version of Win 3.0 is slightly messed up. Other than that, is the …

Just saw the Hackaday report on your write-up... and then saw your demo. As I tweeted out a reply, you got a lot of interest in this. I better buy some Pi Pico W's...

So our yyzkevin has made a PCMCIA Wifi board out of Pi Pico W: https://www.yyzkevin.com/pcmcia-pico-w-card/ It works on a IBM PC110 so I wonder about the HP 200LX... Edit: It does, he mentions it: https://twitter.com/yyzkevin/status/1573079446885912576

A bit of a late update here. I did poke in the current Linux kernel and I have to check how various PCMCIA Card/Socket services work in MSDOS. It may be for naught with the wireless cards, since they're rated for at least 300 mA operation and the 200LX only supplies up to 150 mA to the cards.

Can you keep us (or at least me) updated on your progress with the mTCP conversion of SSH2DOS ? I'm very keen on trying it out once it's working... Sure! Right now I have the code here: https://github.com/STrRedWolf/SSH2DOS So far I've only gotten to getting it up on GitHub. I've yet to get …

A bit of an update. I was able to procure a Netgear FA411 and get it running, so I can Telnet with mTCP. I did see a SSH2DOS program and source code, which was classified as abandoned. I've pulled it up into Github in line to switch it over to mTCP and plug in another cypher to get it working on …

A few updates. Testing with CLKUP31.SYS and on the stock HP 100LX resulted in... the same issues. Bananacom freezes up, and RBComm works but it doesn't have a good terminal emulation. Guess I'll have to use Kermit then. ;) I did get in touch with Bananacom's author, who's on Reddit, to see about …

Are you running the clkup32.sys ? What kind of doublespeed crystal do you have ? the 32MHz one or the 31.64 MHz crystal ? Try it on your stock system and see if it behaves the same... I don't know a lot about it, but the doublespeed options make your UART baud rate setting appear 2x as fast, that's …

Okay, newbie question with double-speed. I'm trying to use another telecom program, completely outside of the native software because... it looks like it's not quite compatible with the terminal capabilities that Linux has (even with vt100). And I'm having associated problems: RBComm sits there and …

Check out this thread: https://www.vogons.org/viewtopic.php?f=62&t=30840&e=1&view=unread#unread The user who's working on it's nickname is yyzkevin Also, Your 8MB 200LX, is it a 1MB or 2MB base model, and what kind of memory upgrade do you have ? IS it 2MB model, with a 6MB expansion board fitted …

Hey all! Radience32 directed me to this forum off his channel. I have both an HP 200LX (Double-speed 8mb) and an 100LX (Stock 1mb). I heard there was plans to do a PCMCIA card that links to an ESP32 or similar for Wifi... and I see there's some onus for sound, parallel port, and maybe storage? A " …