You could just try with 480MB NTFS as that should cover most things. The bootloader and OS files have to remain within the C/H/S limit until patched, otherwise NT will be unable to access the Windows files required to boot.

What C/H/S values does the SSD report? On my CF card installs the drive reports only 16 cylinders. This means the c/h/s limit for the CF card is 504MB (16/1024/63). I create a partition at the beginning of the drive of 480MB and install to that. Once patched with SP6 and the XP ntldr/ntdetect.com I …

I've been testing running Trim on the SSD. So far I've found I can boot a CD of Slax Linux and run fstrim on all my partitions. It appears to work via the controller ok and I get a report of the amount of free space trimmed on the partition. I've also tried a little overclocking to 112 fsb (around …

You will need backup software that understands tape drives. Even when the drivers are installed it's not going to show up anywhere, LTO5 and later are the only versions that can be used as a "drive" with LTFS. Bacula may work for testing, although I've not used it (only Backup Exec, Arcserve, …

I've been assembling and working with OS installs over the last year for this build. I missed the original PIII era, going from a PII to AMD Duron at the time. I'm mostly covering late DOS games to around 2000, for me this is DS9 harbinger to Homeworld 1. The CPUs and GPU are fanless, so I have a …

Hmmm, so some CF cards report a CHS value that further limits them to the 504MB barrier? My CF card geometry reporting 16 heads means that 8GB limit is only going to be 1/16th of the maximum 8GB without LBA, so yes 504MB with this card. I used the uniata driver during install but it is no different …

If anyone is looking for more info I have recently spent a lot of time with NT4 on a CF quad boot setup (FreeDOS/98SE on one 32GB CF and NT4/2000 on a second, using Boot-US for partition hiding). There are some limitations that I had to overcome. 4 is especially important with CF cards 1) I …

They are 11mm x 9mm, but that includes the 1mm lip at the bottom of the two legs, so they appear to be 9mm x 9mm and 7mm tall. I think they would work, up for selling them? You can have them, l only need to cover the shipping costs. Send me a private message with which country you want them shipped …

They look close, could you measure the width of the clips? They are 11mm x 9mm, but that includes the 1mm lip at the bottom of the two legs, so they appear to be 9mm x 9mm and 7mm tall. I think they would work, up for selling them? You can have them, l only need to cover the shipping costs. Send me …

Demo85 wrote on 2022-08-13, 22:27: Ricimer wrote on 2022-08-13, 13:33: I had a vague recollection of having some of these and had a bit of a hunt around. Are these suitable? They look close, could you measure the width of the clips? They are 11mm x 9mm, but that includes the 1mm lip at the bottom …

I had a vague recollection of having some of these and had a bit of a hunt around. Are these suitable?