Re: Supermicro SUPER 370DE6 REV 1.2/Dual PIII Coppermine T/Voodoo5 Build

Posted on 2023-03-26, 08:01

by

by Irinikus

in Marvin \ System Specs

in Marvin \ System Specs

You should be able to choose the primary GPU in BIOS. That'd require a reboot each time you want to switch cards though. I don't know if you can switch between them in OS on the fly. Thanks for the info! When I resume this build, I'll slot a GeForce2 Ultra into the AGP slot then! (And swap between …

---

Re: Supermicro SUPER 370DE6 REV 1.2/Dual PIII Coppermine T/Voodoo5 Build

Posted on 2023-03-26, 07:49

by

by Irinikus

in Marvin \ System Specs

in Marvin \ System Specs

As a matter of interest, this morning I ran Quake III timedemo on my Alienware machine equipped with a QX6850@3.65GHz and an Nvidia Quadro Plex 1000 Model IV (Essentially two 8800GTX's in SLI) and got the following result @1024x768 Max Settings: https://i.imgur.com/6sKOAjB.jpg https://i.imgur.com/ …

---

Re: Supermicro SUPER 370DE6 REV 1.2/Dual PIII Coppermine T/Voodoo5 Build

Posted on 2023-03-25, 22:44

by

by Irinikus

in Marvin \ System Specs

in Marvin \ System Specs

Maybe there is a way to make this build more interesting. Is it possible to run a system such as this with a GeForce card in the AGP slot and the Voodoo5 in the PCI-X slot and only run the Voodoo5 when 3dfxgl is selected? In this way, I could compare the Voodoo5 and GeForce cards directly in the …

---

Re: Supermicro SUPER 370DE6 REV 1.2/Dual PIII Coppermine T/Voodoo5 Build

Posted on 2023-03-25, 22:09

by

by Irinikus

in Marvin \ System Specs

in Marvin \ System Specs

From a collector’s standpoint, the MAC PCI Voodoo5 5500 is one of the rarer and therefore more expensive cards from that time. (It’s crazy, I know, as unpopular items usually end up being far more expensive as collectors items, due to rarity.) The Voodoo5 6000 is ridiculously expensive, $15000 realm …

---

Re: Supermicro SUPER 370DE6 REV 1.2/Dual PIII Coppermine T/Voodoo5 Build

Posted on 2023-03-25, 18:11

by

by Irinikus

in Marvin \ System Specs

in Marvin \ System Specs

It is surprising how much V5 is holding back the interactive graphics. On this mobo+cpus, Q3 can be in the 200+ fps range with better video card. But regardless of that, optics of the assembly are great - clean and tight. Maybe put a “sock” on the molex cables to hide the yellow red black wires. …

---

Re: Build Log: ATi:Resurrected II, Rise of the Radeon - XP/P4/X850 Dream Machine 2005

Posted on 2023-03-25, 10:57

by

by Irinikus

in Marvin \ System Specs

in Marvin \ System Specs

Very Cool! 😀

---

Re: Supermicro SUPER 370DE6 REV 1.2/Dual PIII Coppermine T/Voodoo5 Build

Posted on 2023-03-25, 07:13

by

by Irinikus

in Marvin \ System Specs

in Marvin \ System Specs

I love this build! Looks great in the case. More photos of the build when you have time please! I will definitely do so as the build progresses! It will unfortunately have to be put on hold for now, as yesterday I damaged my Ecoflow Delta Pro and that will cost a small fortune to fix!!!(The entire …

---

Re: Supermicro SUPER 370DE6 REV 1.2/Dual PIII Coppermine T/Voodoo5 Build

Posted on 2023-03-25, 06:58

by

by Irinikus

in Marvin \ System Specs

in Marvin \ System Specs

Beautiful build! But shouldn't both of the power connectors be used? According to the manual, either ATX Power Connector can be used. https://i.imgur.com/QW1YIfl.png PWR_SEC (The AT-type connection is an optional connection to be used for added stability with dual CPU's) I've put the machine …

---

Re: Supermicro SUPER 370DE6 REV 1.2/Dual PIII Coppermine T/Voodoo5 Build

Posted on 2023-03-24, 14:50

by

by Irinikus

in Marvin \ System Specs

in Marvin \ System Specs

chrismeyer6 wrote on 2023-03-24, 13:37: That motherboard looks great in that case. The performance of that system is awesome! Thanks Man! 😀 The Quake III Performance surprised me!

---

Re: Supermicro SUPER 370DE6 REV 1.2/Dual PIII Coppermine T/Voodoo5 Build

Posted on 2023-03-24, 13:34

by

by Irinikus

in Marvin \ System Specs

in Marvin \ System Specs

The Motherboard arrived today and is now installed along with the MAC Voodoo5 5500 PCI and a Sound Blaster Live for now! (So I've managed to carry out some initial testing!!!) This is how the system currently looks: (This Motherboard fills this case!!!) https://i.imgur.com/Y6zp9hZ.jpg https://i. …

---

Re: An EPIC Single Socket-8 Build

Posted on 2023-03-21, 16:12

by

by Irinikus

in Marvin \ System Specs

in Marvin \ System Specs

Here's the latest on this system:

---

Re: Supermicro SUPER 370DE6 REV 1.2/Dual PIII Coppermine T/Voodoo5 Build

Posted on 2023-03-20, 12:34

by

by Irinikus

in Marvin \ System Specs

in Marvin \ System Specs

I may consider the cold cathode lighting, in which case I'd opt for the white light. https://i.imgur.com/ZlhRYbM.jpg Here are some more pics of the motherboard: (It will more than likely arrive fitted with two low spec PIII's and just enough RAM to allow me to install and run XP in order to test it) …

---

Re: A NOT-SO EPIC Dual Pentium Pro Build

Posted on 2023-03-19, 20:31

by

by Irinikus

in Marvin \ System Specs

in Marvin \ System Specs

I'm considering the following cases for this build, as they'll accommodate the CPU card. (This Motherboard presents a problem when it comes to cases which can actually accommodate it! THE CPU CARD WASN'T THE BEST OF IDEAS, as most cases feature drive bays in the area where the CPU card would sit …

---

Re: Supermicro SUPER 370DE6 REV 1.2/Dual PIII Coppermine T/Voodoo5 Build

Posted on 2023-03-19, 18:36

by

by Irinikus

in Marvin \ System Specs

in Marvin \ System Specs

I've decided that I wont employ any RGB lighting in this build, so Ive removed the RGB wiring accordingly and the wiring now has the following layout, which neatens things up greatly:

---

Re: Supermicro SUPER 370DE6 REV 1.2/PIII Coppermine T/Voodoo5 Build

Posted on 2023-03-19, 09:22

by

by Irinikus

in Marvin \ System Specs

in Marvin \ System Specs

The Motherboard's on the way from the US, so I've pretty much prepped the case so that I can drop it in to test it! I have power running to the fan controller and thus I've been able to test all the fans. I've also installed a SCSI hard drive with power, so I just need to plug it into the …

---

Re: Supermicro SUPER 370DE6 REV 1.2/PIII Coppermine T/Voodoo5 Build

Posted on 2023-03-12, 10:56

by

by Irinikus

in Marvin \ System Specs

in Marvin \ System Specs

Today I quickly took a first look at the nest of cables at the back of the motherboard tray! https://i.imgur.com/uLlgXnn.jpg I've removed both 3.5 inch hard drive racks and the included fan hub (as I wont be needing them and the fan hub added extra wires to the mess which aren't removable!) The …

---

Re: An EPIC Dual Pentium Pro Build

Posted on 2023-03-11, 08:17

by

by Irinikus

in Marvin \ System Specs

in Marvin \ System Specs

Due to the issues I've encountered concerning Graphics Options for this build, I've decided to tame my expectations slightly!: ( So it will be running Windows NT4 SP6) And hopefully consist of the following components: (As long as compatibility allows, of cause!) ASUS P/I-P65UP5 Baseboard with a C- …

---

Re: Super Micro 370DL3 Rev.2.0/SUPER 370DE6 REV 1.2 Motherboard?

Posted on 2023-03-11, 05:46

by

by Irinikus

in Marvin \ System Specs

in Marvin \ System Specs

TrashPanda wrote on 2023-03-11, 00:45: The 1.13 CUmine-T is very likely far more rare than your average 1.4s Tualatin, the rarity tax is a thing. It is indeed!

---

Re: Building a new Socket 7 MMX MS-DOS / Windows 95 All-in-one system

Posted on 2023-03-10, 17:31

by

by Irinikus

in Marvin \ System Specs

in Marvin \ System Specs

That's pretty darn cool! 😀

---

Re: Super Micro 370DL3 Rev.2.0/SUPER 370DE6 REV 1.2 Motherboard?

Posted on 2023-03-10, 16:52

by

by Irinikus

in Marvin \ System Specs

in Marvin \ System Specs

Less is More, so I've started to remove what I can to make it look better! Ive removed the top radiator mount along with its dust filter and I've also removed the front dust filter to give the case a cleaner look! (I won't be using this system often, so the lack of dust filters doesn't really bother …

---