VOGONS

Common searches


Search results for AMD

Display options

Re: AMD 5x86 X5-133 (now with POD)

Fine. But can you try out what I suggested? I don't think it would take a lot of time. I don't have another spare PSU at my hand... I need to mess up with the cable management of my working computer a few days later :) I have altered the memory setting and try to remove the L2 cache, but the PCI …

Re: AMD K7 Slot A 1000 Orion 512KB Cache working, Slot A 1000 Thunderbird 256KB Cache NOT

about 11% in actual game performance: Which is not "miles ahead". And that is in the most CPU intensive game of their time. KT133 vs SlA Orion on KX133, but those two chipsets were - apart from the push-pull support - pretty much identical. Yes, they are more or less identical, but the boards …

Re: AMD 5x86 X5-133 (now with POD)

So you have a normal (strong) power supply, and the board works with the Pentium Overdrive but not with PCI network cards, right? So then now try what I wrote, I am repeating it. " Try disabling the L2 cache (or removing the module) AND the slowest RAM settings. Yes, no kidding I mean really the …

Re: AMD 5x86 X5-133 (now with POD)

It doesn't make much sense to me. Why should he disable the L2 cache or change the timings if everything works perfectly fine with a different CPU? @theplum: Are you sure that you got all the jumpers right for the POD? The jumpers on that board are quite a mess and even the manual isn't clear. Took …

Re: AMD K7 Slot A 1000 Orion 512KB Cache working, Slot A 1000 Thunderbird 256KB Cache NOT

The only Slot A VIA KX133 which works fine with Thunderbirds until 1000 MHz, was the Asus K7V-T. I also had lots of problems with the 1GHz version on the Epox 7KXA Rev. 0.4 with freezes and lockups, thought the CPU has a defect... (the 750 Mhz T-Bird version works fine). After searching for more …

Re: AMD 5x86 X5-133 (now with POD)

It doesn't make much sense to me. Why should he disable the L2 cache or change the timings if everything works perfectly fine with a different CPU? @theplum: Are you sure that you got all the jumpers right for the POD? The jumpers on that board are quite a mess and even the manual isn't clear. Took …

Page 332 of 1678