VOGONS


Reply 200 of 211, by Falcosoft

User metadata
Rank Oldbie
Rank
Oldbie
Joseph_Joestar wrote on 2020-02-18, 07:06:

Anyone tried SetMul with a Duron on a SocketA system? I have an Abit KT7A and I'm thinking about downgrading my AthlonXP 1500+ to a Duron 700 in the hopes of getting more slowdown choices.

Currently, SetMul only allows me to disable the L1 cache on the AthlonXP which puts it at around 386 levels, and that's really awesome. However, I'd like something not quite as slow for mid-late 90s games like WarCraft 2 and Red Alert which have issues with overly fast screen scrolling.

Is it possible for SetMul to change the multiplier on the Duron and make it run at something like 200 MHz? For reference, the multiplier settings in my BIOS only go down to 5x.

1. There is no point in replacing your Athlon to Duron for more slowdown choices. Every SocketA desktop CPU has the same minimum multiplier(5x) and cache disabling option with your board . Only L1 cache disabling is possible (which also means disabled L2 cache) so a Duron and an Athlon with disabled L1 cache have the exact same speed. Even with caches enabled the difference is minimal at the possible minimum 500 MHz (5x100).

2. Setmul can only set K7 multipliers in real time with mobile K7 CPU (Athlon XP-M). You can make a desktop CPU a mobile one by modifying some bridges:
http://fab51.com/cpu/barton/athlon-e24.html
https://web.archive.org/web/20170912115837/ht … tiplier_FAQ.htm
The above modifications can work with your Athlon XP but definitely not with your Duron 700. The processor must have some MSR registers for this to work and only Morgan+ Durons have them. Your Duron 700 is a Spitfire without PowerNow! MSR registers.
But unfortunately on KT7-A it's not enough since it's a desktop and not a mobile board. You also have to manually tune your chipset for Setmul to be able to set multipliers on the fly:
https://web.archive.org/web/20170822100906/ht … html/Tweaks.htm

Website, Facebook, Youtube
Falcosoft Midi Player + Munt VSTi + BassMidi VSTi topic

Reply 201 of 211, by Joseph_Joestar

User metadata
Rank Oldbie
Rank
Oldbie

That's too bad, I was hoping for some K6 style granularity with the slowdown.

Ah well, the Duron cost me only 5 EUR, so no big loss.

Using Audigy drivers with a Sound Blaster Live
Installing DOS drivers on an Audigy2 ZS
OPL3 vs. ESFM vs. CQM vs. SBLive
OPTi 82C930 review

Reply 202 of 211, by SaxxonPike

User metadata
Rank Member
Rank
Member

Thank you so much for this utility!

I just grabbed v1.24 to test with an Athlon XP-M 3000+. I have it installed in a KT133A board, the Soltek SL75-KAV. The processor works great and is stable in this board. Crystal can set the multiplier in Windows without issues all the way up to the processor's reported maximum, 16.5x. The startup multiplier and FSB frequency are configured via jumpers on the motherboard. Voltage is configured via a BIOS setting.

SetMul shows all the current settings correctly. Disabling or enabling the L1 cache with SetMul seems to work fine. However, when I attempt to use SetMul to change the multiplier to anything else, it hangs at "Setting K7 PowerNow..", regardless which drivers or TSRs I boot with.

Here's a captured screen from the machine:

k7hang.png
Filename
k7hang.png
File size
56.58 KiB
Views
549 views
File license
Public domain

Anything I should try, or additional info you will need to diagnose this one?

Sound device guides:
Sound Blaster
Aztech
OPL3-SA

Reply 203 of 211, by MKT_Gundam

User metadata
Rank Member
Rank
Member

Past week , saved a VIA c3 700Mhz (100fsb and 1,6v -Saumel 2?).
At BIOS Menu (ASUS CUV4x), seems the multiplier is locked.
Any chances to change the multiplier at SetMul?

Retro rig 1: Asus CUV4X, VIA c3 800, Voodoo Banshee (Diamond fusion) and SB32 ct3670.
Retro rig 2: Intel DX2 66, SB16 Ct1740 and Cirrus Logic VLB.

Reply 204 of 211, by kolderman

User metadata
Rank Oldbie
Rank
Oldbie
MKT_Gundam wrote on 2020-07-29, 01:56:

Past week , saved a VIA c3 700Mhz (100fsb and 1,6v -Saumel 2?).
At BIOS Menu (ASUS CUV4x), seems the multiplier is locked.
Any chances to change the multiplier at SetMul?

100% chance. Why the C3 is so nice.

Reply 205 of 211, by MKT_Gundam

User metadata
Rank Member
Rank
Member
kolderman wrote on 2020-07-29, 02:13:
MKT_Gundam wrote on 2020-07-29, 01:56:

Past week , saved a VIA c3 700Mhz (100fsb and 1,6v -Saumel 2?).
At BIOS Menu (ASUS CUV4x), seems the multiplier is locked.
Any chances to change the multiplier at SetMul?

100% chance. Why the C3 is so nice.

Yes. Its working!
Lowest setting for me 3x 66.6 (200mhz)
At speedtest i got 13,1 with L1/2 disabled , BPD and ICD.
Using freeDOS and no soundcards.

Retro rig 1: Asus CUV4X, VIA c3 800, Voodoo Banshee (Diamond fusion) and SB32 ct3670.
Retro rig 2: Intel DX2 66, SB16 Ct1740 and Cirrus Logic VLB.

Reply 206 of 211, by kolderman

User metadata
Rank Oldbie
Rank
Oldbie
MKT_Gundam wrote on 2020-07-29, 03:07:
Yes. Its working! Lowest setting for me 3x 66.6 (200mhz) At speedtest i got 13,1 with L1/2 disabled , BPD and ICD. Using freeDO […]
Show full quote
kolderman wrote on 2020-07-29, 02:13:
MKT_Gundam wrote on 2020-07-29, 01:56:

Past week , saved a VIA c3 700Mhz (100fsb and 1,6v -Saumel 2?).
At BIOS Menu (ASUS CUV4x), seems the multiplier is locked.
Any chances to change the multiplier at SetMul?

100% chance. Why the C3 is so nice.

Yes. Its working!
Lowest setting for me 3x 66.6 (200mhz)
At speedtest i got 13,1 with L1/2 disabled , BPD and ICD.
Using freeDOS and no soundcards.

That sounds about right. I think my k6-3 got around 11 at slowest settings. The C3 will scale better over the 486-pentium range though.

Reply 207 of 211, by MKT_Gundam

User metadata
Rank Member
Rank
Member
kolderman wrote on 2020-07-29, 03:37:
MKT_Gundam wrote on 2020-07-29, 03:07:
Yes. Its working! Lowest setting for me 3x 66.6 (200mhz) At speedtest i got 13,1 with L1/2 disabled , BPD and ICD. Using freeDO […]
Show full quote
kolderman wrote on 2020-07-29, 02:13:

100% chance. Why the C3 is so nice.

Yes. Its working!
Lowest setting for me 3x 66.6 (200mhz)
At speedtest i got 13,1 with L1/2 disabled , BPD and ICD.
Using freeDOS and no soundcards.

That sounds about right. I think my k6-3 got around 11 at slowest settings. The C3 will scale better over the 486-pentium range though.

I waiting for my slotcket and put this or my Erza 800 on BX board.
My CUV4x has only 1 ISA slot. I want put another isa soundcard + arueal vortex2 or Sb live.

Retro rig 1: Asus CUV4X, VIA c3 800, Voodoo Banshee (Diamond fusion) and SB32 ct3670.
Retro rig 2: Intel DX2 66, SB16 Ct1740 and Cirrus Logic VLB.

Reply 208 of 211, by kolderman

User metadata
Rank Oldbie
Rank
Oldbie
MKT_Gundam wrote on 2020-07-29, 03:50:
kolderman wrote on 2020-07-29, 03:37:
MKT_Gundam wrote on 2020-07-29, 03:07:
Yes. Its working! Lowest setting for me 3x 66.6 (200mhz) At speedtest i got 13,1 with L1/2 disabled , BPD and ICD. Using freeDO […]
Show full quote

Yes. Its working!
Lowest setting for me 3x 66.6 (200mhz)
At speedtest i got 13,1 with L1/2 disabled , BPD and ICD.
Using freeDOS and no soundcards.

That sounds about right. I think my k6-3 got around 11 at slowest settings. The C3 will scale better over the 486-pentium range though.

I waiting for my slotcket and put this or my Erza 800 on BX board.
My CUV4x has only 1 ISA slot. I want put another isa soundcard + arueal vortex2 or Sb live.

The Live might have issues with the Via chipset on that board, the vortex2 will be fine though.

Reply 209 of 211, by bbuchholtz

User metadata
Rank Newbie
Rank
Newbie

Hey Gerwin,

Thank you very much for this tool. It's been super useful!

I was wondering if there was a way to call setmul from config.sys? I'm looking for a way to change CPU registers, before the memory manager loads.

-Brian

Reply 210 of 211, by gerwin

User metadata
Rank l33t
Rank
l33t
bbuchholtz wrote on 2020-11-22, 18:58:
Hey Gerwin, […]
Show full quote

Hey Gerwin,

Thank you very much for this tool. It's been super useful!

I was wondering if there was a way to call setmul from config.sys? I'm looking for a way to change CPU registers, before the memory manager loads.

-Brian

Glad to hear that SetMul has been useful.
I don't know exactly what configuration you are thinking of. The way SetMul is compiled it is of course no DOS .sys driver, nor is it a real mode program. But if you want a real mode program to simply send certain bytes to certain CPU registers, is such a thing not already available?
Currently my mind is not really on making significant changes to SetMul.

--> ISA Soundcard Overview // Doom MBF 2.04 // SetMul

Reply 211 of 211, by bbuchholtz

User metadata
Rank Newbie
Rank
Newbie

Hey Gerwin,

I'm having an issue with QEMM's DPMI. I am unable to disable CPU cache, while DPMI is active. However, I can safely change CPU multiplier.

I'm looking for a way to disable CPU cache, before the memory manager loads. A lot of folks use QEMM and DPMI. May be a worthwhile feature to add.

-Brian