VOGONS


First post, by ATi_Loyalist

User metadata
Rank Newbie
Rank
Newbie

Hey everyone, I am new to Vogons, but I love old hardware.

In 2002 I bought a 9700 Pro just after launch. It was the best card I have ever owned, and it hangs in a frame to this day. The story there is, I overclocked the crap out of that thing, if I recall it was around 410MHz core clock. Stock was 325MHz. The card was volt modded, added a 10k pot to a couple pins on the VDDQ chip to allow adjustment of the VCore. I added a heatsink to the VDDQ at one point, but later on it got caught on something and I tore the chip off the card. 🙁 I wish I had a cooler story. Technically the card would still work, but I cant seem to get my hands on a replacement chip, nor do I have the proper hot air rework equipment to reattach a chip like that.
Ironically, after I took the photo of the 9700 Pro in the shadow box, I noticed the reflection of Gordon Freeman, our favorite mute hero from the greatest game of all time, HL2. I have a digital painting on canvas of him hanging next to my PC.

Ok Ok Here we go
On with the story. I created a project called ATi 1.0, nicknamed after my handle, 'ATi_Loyalist' It went through several iterations, the last one being ATi:Resurrected a long time ago, maybe 2004 or so.
I still have the case and some of the hardware and with the resurgence of retro gaming and PCs, I decided to rebuild my P4 system with the components I ALWAYS wanted when I was younger. I learned so much about modding with this case and it has been in a closet for 10+ years, it is my one possession, (next to my framed 9700 Pro and HL2 Painting) that I will never let go! It has a long and detailed history. The case was powdercoated red with multicolor flake, but I just dropped off the components at the powdercoater to get redone in silver with candy blue, and the chassis gloss sparkle black. Should get it back this week!

The original build in 2002
P4 2.66 GHz Northwood
Alpha PAL8942 Heatsink with one of those ridiculous Delta EHE fans. 55dB of pure power was all the rage in those days! I was able to overclock the processor to 3.4 GHz at the time.
Asus P4PE (with the lesser 845PE chipset, DDR333 FTL)
Radeon 9700 Pro - At the time, this card cost about as much as I spent on the rest of the system! $399 at launch! I spent maybe $500 on everything else! Case, PSU, RAM, etc! Hah!
120GB Hard drive
1GB DDR333 (2x 512MB)
Turtle Beach Santa Cruz sound card

Current Build:
P4 3.4 GHz Northwood (dreaming of a 3.4GHz Galatin EE, as soon as I find one it's mine!)
Thermalright XP-120 CPU Cooler
Asus P4C800 875P Chipset, mean overclocker in the day! I looked at the Abit IC7 and IS7 too, and a couple Soyo boards, but went with Asus, I have always been an Asus fanboy.
Radeon X850 Pro, I also have in my collection, a 9700 Pro, 9800 Pro, 9800XT, FireGL X2-256t, I may swap one of them out if needed, but I feel the X850 is right on the edge of period-appropriate, and is at the last string of 98SE and XP compatibility
320 GB Hard drive, thought about an SSD but that is totally cheating at the retro P4 rig game! Right?
Corsair TX750 (the only semi-modern component in the build, older PSUs are tough to find, and I got this one at a great price!)

Sources include, local electronics recycler, eBay, and a monthly electronics swap meet I have been going to.

Tl;dr - ATi fanboy rebuilds early 2000's gaming rig with dream components. More pictures to come! Stay tuned! Will be posting tons of build photos and retro photos as I find them.

Also, I am not sure if this is in the right section or not, but if it should need to be moved, Mods please move. I am new here, still trying to learn all the different subforums! Thank you!

Last edited by ATi_Loyalist on 2023-03-24, 23:32. Edited 2 times in total.

P4/XP Rig: P4C800 | P4 3.4 | Radeon X850 Pro
A64/XP Rig : A8V | A64 X2 4400+ | X1950 Pro
Ancient Rig: Pentium 166 W | S3 Trio

Reply 1 of 32, by ATi_Loyalist

User metadata
Rank Newbie
Rank
Newbie

Also, I would like to add that I was sparked by some recent LGR and 8-Bit-Guy videos as well as PhilsComputerLab, on YouTube, that got me thinking, maybe this is a good idea....? Honestly, I always thought to myself, I HAVE to be the ONLY person in existence that even cares about this old stuff. And that there was no way anyone even remembered or cared about the Athlon XP days, when intel actually had something to worry about, or the early ATi days, trading blows with Nvidia, the rivalry, the benchmarks, I love it all! Hours spent benchmarking and overclocking, in pursuit of performance and fps, but I probably spent as much time or more on modding, benching and OCing! Who else is with me!?

P4/XP Rig: P4C800 | P4 3.4 | Radeon X850 Pro
A64/XP Rig : A8V | A64 X2 4400+ | X1950 Pro
Ancient Rig: Pentium 166 W | S3 Trio

Reply 2 of 32, by deleted_Rc

User metadata

Pictures of the case are always welcome 😊
Always enjoy seeing a nicely modded tower.
*drools*9800 XT*drools*
Had the pro version 256 back in the days with my xp 1800+. They are hard to find now, and the one I found turned out to be a scammer (tough luck for the guy we had the same bank).

Reply 3 of 32, by dexvx

User metadata
Rank Oldbie
Rank
Oldbie

I remember when the Radeon 9700 launched. It's performance was just jaw-dropping. Bunch of friends took the gamble and tried for the Radeon 9500 non-pro to Radeon 9700 unlock. Unfortunately, I had a GeForce 4 TI4200 at the time, and could afford to get them at launch. I only got the Radeon 9800 Pro (I guess about a year after launch), and it was still great.

Reply 4 of 32, by ATi_Loyalist

User metadata
Rank Newbie
Rank
Newbie

Hey Vogoners, I am writing from my P4 system right now. Have some updated images. Case is still at the powdercoater this week. Hope to get it back soon.

Here we go!
P4C800 with 3.4GHz NW SL6WG

I replaced the 15 year old TIM under the northbridge heatsink and the motherboard reported a temp drop of about 4-5C under load. Clearly this stuff has a lifespan! It was the factory pink clay-like TIM. Replaced it with some Arctic Silver Non-conductive Ceramique.

vc7B0JH.jpg

y1yc5D7.jpg
875P Northbridge

nsOCsmU.jpg
875P Northbridge

xCKvEcy.jpg
Also used some Arctic Alumina 2-part thermal epoxy. This stuff is very strong so be 100% sure before fixing things with it. I tested the locations of all the MOSFET heatsinks before attaching them.

IQrEjif.jpg
I just realized the 3.2 is pictured here, I have a 3.4 in the system now. Still on the lookout for the 3.4EE!
I grabbed a new production all metal P4 Socket 478 bracket with backplate, the backplate is all metal too so I put a thin piece of plastic between it and the board on the back.

WxRriWT.jpg
So beautiful. Love this shot. So much nostalgia!

WUd4UQq.jpg
Alphacool MOSFET heatsinks

yoQx8kP.jpg
These should add some stability to the power delivery circuit for the processor and possibly assist in overclocking. If nothing else, help the board run cooler for better longevity.

62LHINv.jpg
What do you guys think, will this be enough? I think so....

iTrXGwT.jpg
The monsterous XP-120 with a nice UV Blue LED fan.

zFN8B4Q.jpg

3Gtt5GU.jpg
Best I could do so far, DDR400 2-3-2-5. Runs fine at 2-2-2-5 so far, we will see. True 2-2-2-5 was hard to come by in the early 2000's, OCZ Gold series I believe, more like OCZ Unobtanium series these days. The 875 chipset is all about tight timings, it hardly matters anymore on modern hardware, but withthe 875 chipset with PAT, the maximum performance benefit comes with the tightest timings.

asIIL6p.jpg
X850 Pro w/ VIVO. I plan to flash the BIOS to an XT PE, unlocking 4 additional pixel pipelines 😁
Also planning to add a zalman VGA cooler and ramsinks.

qHYNuip.jpg
The test bench

952F9ZO.jpg

8WASdIP.png
Results! Stock clocks for now. Goal is 21k.

Thanks! Will update when my case gets back from the powdercoater.

P4/XP Rig: P4C800 | P4 3.4 | Radeon X850 Pro
A64/XP Rig : A8V | A64 X2 4400+ | X1950 Pro
Ancient Rig: Pentium 166 W | S3 Trio

Reply 5 of 32, by PhilsComputerLab

User metadata
Rank l33t++
Rank
l33t++

Moved

YouTube, Facebook, Website

Reply 8 of 32, by vetz

User metadata
Rank l33t
Rank
l33t

Nice system! Very like my own P4 build 😀 I'm running 3.2ghz EE and 6800 GT@Ultra with huge Thermaltake custom silent VGA cooler. I just acquired a CT-479 so I'll be upgrading it to a Pentium M 780 with Zalman 7700 cooler.

Where did you get the mosfet coolers from?

That OCZ RAM is hard to come by, I have 4x1GB of it, but I found a set of 4x512MB 3200LLPRO (with LED activity), so I switched to those instead. Looks nicer 😀 I placed the OCZ set in my 939 system which is a better mix.

3D Accelerated Games List (Proprietary APIs - No 3DFX/Direct3D)
3D Acceleration Comparison Episodes

Reply 9 of 32, by ATi_Loyalist

User metadata
Rank Newbie
Rank
Newbie

Mosfet heatsinks here: https://www.amazon.com/Alphacool-GPU-Heatsink … acool+heatsinks
Listed as GPU RAM Heatsinks, but they are so tiny! Too small for BGA Ram modules on a GPU for sure. But the perfect size for Mosfets!

P4/XP Rig: P4C800 | P4 3.4 | Radeon X850 Pro
A64/XP Rig : A8V | A64 X2 4400+ | X1950 Pro
Ancient Rig: Pentium 166 W | S3 Trio

Reply 10 of 32, by AzzKickr

User metadata
Rank Member
Rank
Member

Bump ? 😀

Heresy grows from idleness ...

Reply 11 of 32, by ATi_Loyalist

User metadata
Rank Newbie
Rank
Newbie
AzzKickr wrote:

Bump ? 😀

Sorry I have been very busy with work. I am a small business owner and it comes in waves!
I have lots of pictures to upload though, subscribe for updates soon!

P4/XP Rig: P4C800 | P4 3.4 | Radeon X850 Pro
A64/XP Rig : A8V | A64 X2 4400+ | X1950 Pro
Ancient Rig: Pentium 166 W | S3 Trio

Reply 12 of 32, by AzzKickr

User metadata
Rank Member
Rank
Member
ATi_Loyalist wrote:
AzzKickr wrote:

Bump ? 😀

Sorry I have been very busy with work. I am a small business owner and it comes in waves!
I have lots of pictures to upload though, subscribe for updates soon!

I know the feeling 😀

Heresy grows from idleness ...

Reply 13 of 32, by ATi_Loyalist

User metadata
Rank Newbie
Rank
Newbie

Just checking in, hope you are all well.
System is up and running, I boot it up once every couple months when I have some free time. Working my way through Unreal, and Alice (AmMcgee) at the moment.

On to the case, my old Lian Li PC-65B

It had the old backplane that I had hacked on and fiddled with several times over several iterations of case 'eras', and I decided to draw up a new one and waterjet it. I removed the rivets and brackets from the original Lian Li backplane and scanned it on the office scanner. I measured a few dimensions on the physical piece and scaled the scanned image in solidworks. This allowed me to create a 2D file to use for waterjet.

04oso6r.jpg

On the right is the new piece.
1N1Z6s7.jpg

iqyQtmo.jpg

9MWuNDG.jpg

And installed in the old chassis:
tRShBMl.jpg

zDQuawr.jpg

More to come!

P4/XP Rig: P4C800 | P4 3.4 | Radeon X850 Pro
A64/XP Rig : A8V | A64 X2 4400+ | X1950 Pro
Ancient Rig: Pentium 166 W | S3 Trio

Reply 14 of 32, by chrismeyer6

User metadata
Rank l33t
Rank
l33t

That's seriously awesome keep up the great work. Be sure to post some more pictures of your rig.

Reply 15 of 32, by ATi_Loyalist

User metadata
Rank Newbie
Rank
Newbie

Sorry for the long delay! I am alive and well and have two daughters and moved to a new home! Anyway, my little XP rig is doing great, I got the components back from the powder coat shop, the frame was done in black with silver metallic clear and the externals are candy blue with metallic clear. I added some UV LED 80mm fans for the front intakes and got everything installed and booted up with XP SP3. I'll do another update with software stats soon but just running a basic XP install at the moment.

P4/XP Rig: P4C800 | P4 3.4 | Radeon X850 Pro
A64/XP Rig : A8V | A64 X2 4400+ | X1950 Pro
Ancient Rig: Pentium 166 W | S3 Trio

Reply 17 of 32, by bZbZbZ

User metadata
Rank Member
Rank
Member

Wow, it's been a long time....

Your build looks fantastic! The paint work is top notch. I like the almost-period-correct Linksys access point 😉

Reply 18 of 32, by timsdf

User metadata
Rank Newbie
Rank
Newbie

Awesome paintjob! It's always fun see differently customized Lian Li case systems 😁

Reply 19 of 32, by ATi_Loyalist

User metadata
Rank Newbie
Rank
Newbie
timsdf wrote on 2023-03-14, 11:25:

Awesome paintjob! It's always fun see differently customized Lian Li case systems 😁

Thanks! I truly love Lian Lis. Wish I could find an all original mid tower and just leave it alone!

bZbZbZ wrote on 2023-03-13, 02:38:

Wow, it's been a long time....

Your build looks fantastic! The paint work is top notch. I like the almost-period-correct Linksys access point 😉

Thanks, Yeah I don't know how many times I've thought to check in! Hope to be around more
Love this community though. 😊 Quite the interesting hobby.
Yes those darn linksys WRT routers are just indestructible, I have had that thing for 20 years probably. Finally decomissioned it in favor of newer ubiquiti APs but it was still working just fine out in my workshop there running DD-WRT or something if I recall!

P4/XP Rig: P4C800 | P4 3.4 | Radeon X850 Pro
A64/XP Rig : A8V | A64 X2 4400+ | X1950 Pro
Ancient Rig: Pentium 166 W | S3 Trio