First post, by GabrielKnight123
I have basically finished my all original retro parted Pc the only thing missing is a white Dvd drive as the one in it is a black one, on the front face panel it looks like there are two 3.5 inch floppy drives but the bottom one is just plastic I will have to get a blank one some day. The specs are:
CPU - 486 DX2 66MHz
Motherboard - Gemlight GMB-486UNP
Motherboard Cache - 256Kb
Ram - 16Mb 30 pin Simms 4x4Mb
200 Watt power supply
20GB IDE hard drive with 4 partitions of 2GB each I used Dynamic Drive Overlay software to get 2GB
VLB Video Card with 1Mb Vram - (will have to pull out card to get model I have forgotten)
An I/O Controller card for IDE and Floppy
Pro Audio Spectrum 16 with FCC ID: IXW-SCSI 1-1 and modded CD in cable to fit Dvd drives audio out
Floppy controller card only being used for one COM port for the serial mouse
Battery has been removed from the motherboard and cleaned of corrosion but luckily there was not much
Cmos battery has 3x AA 1.5 volt batteries in a black plastic box with velcro holding it in place
Cable management is zip tied and nice and neat
3.5 inch floppy drive and a Dvd burner drive
Dos 6.21
Here are some pics: