VOGONS


Toshiba Satellite Pro 430CDT

Topic actions

Reply 20 of 27, by Gered

User metadata
Rank Member
Rank
Member
serenitatis wrote on 2020-10-22, 14:28:

Can you upload your utility for time setup on boot?

Sure, you can download the .exe and the .bas source code right here.

486DX2-66/16MB/S3 Trio32 VLB/SBPro2/GUS
P233 MMX/64MB/Voodoo2/Matrox/YMF719/GUS CD3
Duron 800/256MB/Savage4 Pro/SBLive (IN PROGRESS)
Toshiba 430CDT

Reply 22 of 27, by RetroLizard

User metadata
Rank Member
Rank
Member

I have one of these machines myself, but I'm unsure how to install MS-DOS 6.22/W3.1 on it without a floppy drive. Any way to get the machine to boot from CD-ROM, by chance? Or maybe a PCMCIA card with a USB floppy drive?

Reply 23 of 27, by God Of Gaming

User metadata
Rank Member
Rank
Member

I got a 400cdt earlier this week, which was the one recommended by 8bitguy for dos gaming because of the 640x480 screen res. Sadly the seller didn't pack it well so it arrived with a cracked screen 🙁 Now I have to wonder how to find a replacement screen for it. Can't figure out how to open it to check what's the model number of the old screen either 🙁 BTW mine came with two external floppy drives that plug into a connector on the side of the laptop

1999 Dream PC project | 2001 Dream PC project | 2003 Dream PC project

Reply 24 of 27, by MAZter

User metadata
Rank Member
Rank
Member
God Of Gaming wrote on 2020-11-21, 19:32:

Now I have to wonder how to find a replacement screen for it.

Screen is expensive today:

LTM10C021K
https://www.impactcomputers.com/p000204490.html

Not sure, if this screen interchangeable with one of this:

LTM10C021
LTM10C025

Doom is what you want (c) MAZter

Reply 25 of 27, by God Of Gaming

User metadata
Rank Member
Rank
Member

Damn, that is pricy. Thanks for letting me know the exact model, tho I will still need to figure out how to disassemble the laptop to replace it once I can get one. The upper part where the screen is seems to have no screws or anything, I have no idea how its supposed to open. I tried to open the bottom part where the motherboard is to take a look at it, but couldnt open that one either, after taking out the screws, and finding the plastic clips holding it together, something right in the middle was still holding it together not letting me completely open it, and I was afraid to pull any harder as I might break whatever its holding it together and it could be something important. Were these meant to be user servicable at all?

p.s. RIP screen, laptop was just 30 euros too, and now I have to spend more than twice that for new screen 😒 just because seller hadn't packed it well, was just inside cardboard box with no foam or padding, not even "fragile" sticker, and the couriers applied their "gentle touch" as usual
umhGuuv.jpg

1999 Dream PC project | 2001 Dream PC project | 2003 Dream PC project

Reply 26 of 27, by Thermalwrong

User metadata
Rank Member
Rank
Member

Damn, I had the same happen to a Toshiba Tecra 520CDT - the laptop was in absolutely perfect condition in the pictures. But the seller didn't pack it well in the laptop bag and a clip on the laptop bag, got pushed into it and broke the screen. Another one that's difficult to find the screens for.

With the Toshiba Satellite models - the 400CDT is shared with a whole bunch of Toshibas from the Satellite 100CT & 200CDT. I used the LCD from a Satellite 100CT (no soundcard!) where the BIOS battery had ruined the mainboard to repair my Satellite Pro 410CDT, which had an LCD that just displayed white. Perhaps get hold of a similar laptop that no longer turns on due to corrosion and repair it that way.
This covers how you remove the "Display Mask" then the screen: http://www.minuszerodegrees.net/manuals/Toshi … ce%20Manual.pdf

Reply 27 of 27, by Spitz

User metadata
Rank Newbie
Rank
Newbie
serenitatis wrote on 2020-10-22, 14:28:

Yesterday I got Satellite 210CS which is very similar to 430CDT and find few tips very cool. fan.exe helps me to test fan (working OK) and vexp is also very useful. If they could to replace horrible CSTN matrix to TFT 😀 But my laptop is very reliable for Win95/DOS stuff. For DOS games I plan to use external monitor. Also my CD-ROM seems to be died at my hands. But I'm lucky one and have spare drive. Now my 210CS have 24x CD-ROM and ability to read CD-RW discs. Which is very useful for files exchange from modern PC.

Can you upload your utility for time setup on boot?

https://www.timesynctool.com/ That's the tool. I have Bunch of Sattelite/PRO first thing Im cutting off battery to prevent leakage.... Do it for the 1st place at Yours (it's just under they keyboard). I have one spare 210 CDT with TFT active matrix for parts too.

Well... I miss 80/90s ... End of story