Retro Rig Photo Thread

Showcase your Retro PC / Build logs.

Re: Retro Rig Photo Thread

Postby cuba200611 » 2017-10-28 @ 14:55

Yeah, quite nice.

I see a Roland MPU-PC98II, a PC-FXGA, what appears to be two Voodoo IIs in SLI configuration (by the ports that are shown), and some unknown sound board.

Here's a picture of my machine:

IMG_0122.JPG
User avatar
cuba200611
Newbie
 
Posts: 20
Joined: 2016-11-12 @ 02:17
Location: SW Florida

Re: Retro Rig Photo Thread

Postby frankmonk » 2017-10-29 @ 23:56

speaking of japanese retro pc`s....this is by far my most favourite system...the sharp x68000
short specs: x68000 xvi-hd,cz-614d monitor with speakers and remote, sharp midi board, xsimm10 memory extension,aztecmonster scsi,3d glasses

Image
frankmonk
Newbie
 
Posts: 17
Joined: 2015-9-20 @ 20:14

Re: Retro Rig Photo Thread

Postby cuba200611 » 2017-10-30 @ 00:28

I see that Ghouls 'n Ghosts is being played on it.
User avatar
cuba200611
Newbie
 
Posts: 20
Joined: 2016-11-12 @ 02:17
Location: SW Florida

Re: Retro Rig Photo Thread

Postby HPI » 2017-10-30 @ 02:16

My Sharp X68000XVI and X68030 old system
This 33MHz 68030 ,SCSI-2 HD 80MB ,8MB RAM and MC68882 math co-processor module ,X68000XVI 16Mhz ,and Xellent30 PCB (MC68030 +68882)
Attachments
dc004.jpg
dc004.jpg (37.55 KiB) Viewed 1179 times
dc003.jpg
dc003.jpg (40.77 KiB) Viewed 1179 times
dc002.jpg
dc002.jpg (55.1 KiB) Viewed 1179 times
dc001-1.jpg
DSCF0016.jpg
Image
User avatar
HPI
Newbie
 
Posts: 9
Joined: 2017-3-29 @ 11:59

Re: Retro Rig Photo Thread

Postby Radical Vision » 2017-10-30 @ 08:31

HP PIII Ultra Slot 1
20141011_151736.jpg




_______________________________________________________________________

AMD K7 Armored Interceptor+
IMG_20170908_153635.jpg


CPU--------------AMD Athlon​XP-M 2600+​/3800+ 2.6​GHz
CPU Cooler--------------Thermaltak​e Sonic To​wer Rev.1 ​Silent CPU​ cooler
---------------------------Cooler Mas​ter Aero 7​+ copper s​ocket 462 ​cooler
Motherboard--------------ABIT NF7-S​ V2 socket​ 462
Memory --------------G. Skill 2​GB DDR 400​+Dual Chan​nel Kit
Storage --------------Seagate Ba​rraCuda 72​00.10 ST33​20620A 320​GB 7200 RP​M
Seagate Ba​rracuda ST​3500830A I​DE ATA/100​ 7200 RPM
Video Card-------------- HIS ATi Ra​deon HD 38​50 IceQ 3 ​Turbo 512M​B (256bit)​ GDDR3 AGP
Case -------------- HP XW50​00​ Intercept​or+
Power Supply -------------- ENERMAX Li​berty ELT4​00AWT 400W​ CrossFire​ Ready Mod​ular Activ​e PFC Powe​r Supply



_______________________________________________________________________

Compaq PII GTO
IMG_20170622_151807.jpg


CPU --------------Intel pent​ium 2 450M​Hz
Motherboard-------------- Gigabyte B​X 2000
Memory --------------X4 SDram P​QI 128MB
Storage -------------- Quantum Fi​reball lct​10 - IDE 1​0.2 GB ATA​-66
Video Card --------------nVIDIA Riv​a TNT2 Pro​
---------------------------- 3Dfx Voodo​o Rush 6MB​ PCI - Aco​rp



_______________________________________________________________________


Rebuilding and repairing Compaq AP 550 Pro Workstation
IMG_20170912_181401.jpg


CPU -------------- x2 Intel P​III 1GHz C​oppermine
Motherboard-------------- Compaq AP5​50 Motherb​oard
Memory --------------x4 256MB 1​GB SDram S​amsung
Storage --------------Fujitsu En​terprise M​AJ3182MP 1​8.2 GB - U​ltra160 SC​SI



_______________________________________________________________________

AMD Opteron/ LanParty NF4 smoke machine
IMG_20170908_170103.jpg


CPU -------------- AMD Optero​n 165
CPU Cooler-------------- Zalman - C​NPS7000C-C​u
Motherboard-------------- DFI LanPar​ty Ultra-D​ NF4
Memory -------------- Corsair XM​S DDR 400 ​Xtreme
Storage -------------- Hitachi 80​GB 8MB 720​0 HDS72808​0PLA380
Video Card -------------- Palit Rade​on HD4670
Power Supply-------------- Thermaltak​e Xaser Si​lent Purep​ower 480W
Image
Image
Image
Image
Image
User avatar
Radical Vision
Newbie
 
Posts: 32
Joined: 2017-10-30 @ 07:30
Location: Bat Cave

Re: Retro Rig Photo Thread

Postby Cga.8086 » 2017-11-01 @ 15:07

frankmonk wrote:Almost finished my new 486 build. still need some fine tuning and of course cable management

Hercules MT Tower
Asus PCI/I 486SP3G using SCSI on Board
32MB
AMD AM5x86 133Mhz
Video: Ark Logic ARK2000 PCI 2MB
Pionner 305s Slot-in DVD RomSCSI
Sound 1: Sound Blaster 16 CT2230 with Yamaha DB50XG Daughterboard
Sound 2: Gravis Ultrasound Classic rev 3.7
2GB Seagate SCSI HDD (needs to be replaced by something quiter soon)

Image
Image
Image


i have the same case , it was used for a 286 motherboard and goes up to 20mhz or soemthing like that

the sad thing i found on that case is that if you open it there is a big PBC full of jumpers with no documentation anywhere on that board, and i was not able to fully get controll of all the bars that make up the numbers, so for example i was not able to set it as 66mhz , but i was able to set it as 20mhz for example.
Cga.8086
Newbie
 
Posts: 72
Joined: 2017-4-16 @ 22:38

Re: Retro Rig Photo Thread

Postby frankmonk » 2017-11-01 @ 19:49

Cga.8086 wrote:
frankmonk wrote:Almost finished my new 486 build. still need some fine tuning and of course cable management

Hercules MT Tower
Asus PCI/I 486SP3G using SCSI on Board
32MB
AMD AM5x86 133Mhz
Video: Ark Logic ARK2000 PCI 2MB
Pionner 305s Slot-in DVD RomSCSI
Sound 1: Sound Blaster 16 CT2230 with Yamaha DB50XG Daughterboard
Sound 2: Gravis Ultrasound Classic rev 3.7
2GB Seagate SCSI HDD (needs to be replaced by something quiter soon)

Image
Image
Image


i have the same case , it was used for a 286 motherboard and goes up to 20mhz or soemthing like that

the sad thing i found on that case is that if you open it there is a big PBC full of jumpers with no documentation anywhere on that board, and i was not able to fully get controll of all the bars that make up the numbers, so for example i was not able to set it as 66mhz , but i was able to set it as 20mhz for example.


actually it only has 2 rows of dipswitches ;)......
Last edited by frankmonk on 2017-11-01 @ 22:17, edited 1 time in total.
frankmonk
Newbie
 
Posts: 17
Joined: 2015-9-20 @ 20:14

Re: Retro Rig Photo Thread

Postby oeuvre » 2017-11-01 @ 21:22

you can never have enough DIP switches
HP EliteBook 820 G2
i7 6700K, 32GB, NVIDIA GTX 1060, 256GB M.2 SSD + HD, Windows 10
Image
User avatar
oeuvre
Oldbie
 
Posts: 840
Joined: 2015-3-31 @ 13:31
Location: USA

Re: Retro Rig Photo Thread

Postby Cga.8086 » 2017-11-09 @ 04:38

frankmonk wrote:
Cga.8086 wrote:
frankmonk wrote:Almost finished my new 486 build. still need some fine tuning and of course cable management

Hercules MT Tower
Asus PCI/I 486SP3G using SCSI on Board
32MB
AMD AM5x86 133Mhz
Video: Ark Logic ARK2000 PCI 2MB
Pionner 305s Slot-in DVD RomSCSI
Sound 1: Sound Blaster 16 CT2230 with Yamaha DB50XG Daughterboard
Sound 2: Gravis Ultrasound Classic rev 3.7
2GB Seagate SCSI HDD (needs to be replaced by something quiter soon)


i have the same case , it was used for a 286 motherboard and goes up to 20mhz or soemthing like that

the sad thing i found on that case is that if you open it there is a big PBC full of jumpers with no documentation anywhere on that board, and i was not able to fully get controll of all the bars that make up the numbers, so for example i was not able to set it as 66mhz , but i was able to set it as 20mhz for example.


actually it only has 2 rows of dipswitches ;)......



im sure i was not able to set 66mhz or 99mhz

can you check if yours can? i belive the only options the switches gave me was to put a number like 20 or 8mhz
but there was always a bar that did not light up.

can you take a picture of how you have the switches setup i the back?
on mine i also tried to setup the turbo and it did not work... i always had one speed on the display, maybe you can help me out will send you a private message
Cga.8086
Newbie
 
Posts: 72
Joined: 2017-4-16 @ 22:38

Re: Retro Rig Photo Thread

Postby SpectriaForce » 2017-11-12 @ 17:29

Back somewhere in the period 2003-2005 I used to have quite a large collection of all sorts of classic computers. Here are just some of the systems I once had (enjoy! :blush: ):

Mijn zolder a.jpg


Mijn zolder c.jpg


Mijn zolder e.jpg


Mijn zolder f.jpg


Mijn zolder g.jpg
Win2K keeps the headache of an activation loop away!
Custom Asus TUF X299 Mark 1
Custom Asus P5E
Custom Intel DH61AG
Custom HP XW6200
Custom PCCHIPS M935CG
Custom IBM Aptiva 2176-442
Custom AST Bravo LC 4/33s
User avatar
SpectriaForce
Newbie
 
Posts: 29
Joined: 2017-2-03 @ 22:16
Location: The Netherlands

Re: Retro Rig Photo Thread

Postby DeafPK » 2017-11-13 @ 14:38

Wow, sweet collection! Thanks for the pics, nice sight for tired eyes. You got rid of some of it later? I hope it's all in good hands.
"an occasional fart in their general direction would provide more than enough cooling" —PCBONEZ
User avatar
DeafPK
Newbie
 
Posts: 64
Joined: 2014-3-23 @ 20:24
Location: Norway

Re: Retro Rig Photo Thread

Postby Richo » 2017-11-18 @ 14:29

Richo wrote:finally got around to finish my PIII blue setup :happy:
The Geforce 4600 TI are rare already let alone getting a blue one was I wanted, didn't want to pay 200 for the only one on ebay currently<.<
also found a good use for that spare Aopen tower I painted last year, fitting blue colour ofcourse, still considering getting a Hercules sound card or asus XHigh-fi
Specs:
- Gigabyte GA-60XT socket 370
- Pentium III-S 1400 Mhz Tualatin (with athlon cooler)
- 2x 256 sd ram with blue heatsinks
- Geforce 4 4200 TI Club 3D
- Antec Truepower 330W
- Netgear network card
- 80 GB HD partioned 3 way for dual boot and storage.
- Sony DVD burner
- Philips DVD-rom (needed to fill the slot)
- Card reader/FDD


small update due popular requerst. got some AC-Ryan mod cables with my last order (seller was also selling these and for €2,00 a piece a nice deal).

IMG_20171118_151555.jpg
TX97-XE, P55C, S3Virge, Voodoo, AWE64
GA-60XT, Tualatin, Albatron Geforce4 4200TI
A7N8X Deluxe, Barton, A9800 XT
Strix X99, Haswell-E, Gigabyte Aorus Pascal
User avatar
Richo
Member
 
Posts: 405
Joined: 2016-11-13 @ 21:57
Location: Your local chemical plant

Re: Retro Rig Photo Thread

Postby TheGouldFish » 2017-11-18 @ 21:22

I've setup a trio of old machines for retro gaming
Image

Top machine:
Windows XP.
Athlon64: 3400
1GB ram
160GB HDD
Nvidia 560ti
Creative Audigy Live
DVD Drive
Floppy Drive


Left Machine
Windows 95
Pentium1: 200mhz
32mb ram
Sound Blaster 16
80GB Hdd
ATi Mach 64 2mb
Orchid righteous Voodoo 1
PCI network
DVD Drive
Floppy Drive
Gotek Floppy drive


Right Machine
Windows 98
Pentium3:600Mhz
128MB ram
Sweex PCI sound card
80GB HDD
Diamond Speed Star AGP
Voodoo 2 x2 SLi
ISA network
Slot based DVD drive
Floppy Drive


The Win95 machine doubles as a DOS box as well, I had hoped to use the 98 box for that job but something about the machine doesn't like Vesa2.0 modes and crashes every time.
All three of them connect to a KVM switch (which then connects to a second KVM switch) to a CRT monitor, keyboard and mouse.
User avatar
TheGouldFish
Newbie
 
Posts: 13
Joined: 2017-11-18 @ 20:44

Re: Retro Rig Photo Thread

Postby gdjacobs » 2017-11-18 @ 22:18

What chipset does your Athlon 64 machine use? It might support Win98 as well as XP.
User avatar
gdjacobs
l33t
 
Posts: 4258
Joined: 2015-11-03 @ 05:51
Location: The Great White North

Re: Retro Rig Photo Thread

Postby TheGouldFish » 2017-11-18 @ 23:19

I think it does support 98 (not sure if I could get drivers for the GPU), but I'm happy for the range of hardware and having the twin voodoo 2 cards is fun!
User avatar
TheGouldFish
Newbie
 
Posts: 13
Joined: 2017-11-18 @ 20:44

Re: Retro Rig Photo Thread

Postby MMaximus » 2017-11-19 @ 08:32

TheGouldFish wrote:I've setup a trio of old machines for retro gaming


Nice. What model is the black case on the left?
User avatar
MMaximus
Member
 
Posts: 370
Joined: 2014-3-30 @ 20:28

Re: Retro Rig Photo Thread

Postby TheGouldFish » 2017-11-19 @ 11:21

The case is a "CiT Jet Stream", I spent ages looking for a case that was big enough for the mobo that I had gotten second hand.
It doesn't look the part of a 90s machine and its not all that well built (very thin walls), but it was cheap and seems to work nicely :)
It seems to be getting harder to find cases that are large enough for 7 or so expansion cards and still have 5.25" and 3.5" slots on the front.

I have more retro computers, I'll post them up once I've taken some better pics
User avatar
TheGouldFish
Newbie
 
Posts: 13
Joined: 2017-11-18 @ 20:44

Re: Retro Rig Photo Thread

Postby TheGouldFish » 2017-12-10 @ 09:41

Picked up this machine last week, spent the weekend cleaning it up.

Image
Image
Image

Its the Amstrad PPC640, its XT clone.
NEC V30 (8088, 8086 clone) at 8mhz
It doesn't have a harddrive so it has 2 720kb floppy drives,
640kb of ram
CGA graphics
green monochrome LCD screen, but has video out that gives colour.
User avatar
TheGouldFish
Newbie
 
Posts: 13
Joined: 2017-11-18 @ 20:44

Previous

Return to System Specs

Who is online

Users browsing this forum: amadeus777999 and 1 guest